Amendment 1 Statement of Work- Vertical Carousel v3.pdf

Statement of Work (SOW) For

821 CRSS/DOS

Vertical Carousel

The 821st Contingency Response Support Squadron Aerospace Ground Equipment/Power Production shop has a requirement for one vertical carousel.

Description: The Contractor shall provide all supervision, labor, materials and equipment to purchase and install 1 each Vertical Carousels to support this requirement. The contractor shall install the Carousel system at the 821st CRSS. The contractor shall be responsible for all electrical hookups/connections from the unit motor to the electrical disconnect/panels, as well as a final functional check of the carousel system.

Specifications/Salient Characteristics:

• Contractor shall adhere to all Travis AFB and all federal OSHA standards.

• Carousel must be fully enclosed and store shelves or drawers vertically

• Vertical carousel must be able to select specific tray number

• Vertical carousel shall come equipped with a method to operate equipment without power

• Vertical carousel must have a safety device installed to immediately stop equipment in the situation that any foreign object enters the access door during tray movement

• Unit will be no taller than 12ft 0.1 in

• Unit will be no wider than 12ft

• Unit will be no deeper than 7ft

• Unit must have minimum 400 sq. ft. of storage

• Vertical carousel shelves shall have two tiers (removable if necessary), one with open storage and the others with removable storage boxes.

• Each shelf shall have a 1-2 foot height requirement

• Must offer a minimum 5 year warranty

• Vertical carousel must be equipped with emergency stop button

• Vertical carousel must have ability to be pin protected to prevent access from unauthorized personnel

• The electrical disconnect box will have a blade switch

Special Requirements:

• Contractor will provide a certified electrician to run power from the power panel to the vertical carousel including the disconnect box

• Contractor must secure vertical carousel to ground preventing equipment from tipping

• Contractor must function test equipment after installation to ensure proper operation

• Contractor must provide 1 hour in person initial training for up to 15 personnel on vertical carousel operation at completion of install

Qualifications/Certifications:

• Contractor will provide a certified electrician to install power for carousel operation