Statement of Work.pdf
PDF 201 KB Posted
- Attached to
- Bead Beating Grinder and Lysis System Federal contract opportunity
- Solicitation number
- 12505B23Q0180
About this file
This statement of work outlines requirements for a bead beating grinder and lysis system to be acquired by the USDA Agricultural Research Service Midwest Area. The instrument must be capable of processing up to 24 samples simultaneously, have a touch screen interface, programmable settings, and weigh less than 70 pounds. It must be shipped within 30 days of award to a specified address. The related federal contract opportunity is solicited by the USDA ARS Midwest Area to fulfill this statement of work for a bead beating grinder and lysis system.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Provisions and Clauses.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work / Specification Document Bead Beating Grinder and Lysis System
GENERAL INFORMATION
1.0 Scope of Work: Acquire a Bead Beating Grinder and Lysis System to break down insects and bacteria to enable extraction of nucleic acids, lipids, and proteins for research at the USDA-ARS Biological Control of Insects Research Laboratory (BCIRL) in Columbia, MO.
2.0 Background: Researchers within the BCIRL will use this instrument to facilitate and expedite the quantity and quality of nucleic acid, lipid, and protein extractions from insect samples. This will greatly improve the quality and quantity of data we can generate from samples.
CONTRACTOR REQUIREMENTS
3.0 Technical Requirements/Tasks: Bead Beating Grinder and Lysis System shall meet or exceed the following technical specifications:
• Maximum load of 24, 2 mL samples.
• Touch Screen Interface / 151.5 mm x 85.5 mm screen size.
• 120 VAC / 60 H power requirement.
• Programmable settings for speed, adapter, time, lysing matrix, sample quantity, sample units, cycle, pause time and display readout.
• Speed range of 4 to 10 m/sec in 0.5 m/sec increments.
• Standard QuickPrep-3, 24 x 2 mL adaptor and additional adaptors available to purchase later.
• Required software to operate instrument must be included.
• 12 programmable assay locations.
• 70 dB maximum sound level.
• Must weigh less than 70 lbs.
• Must fit into a space 2’ X 2’ X 2’.
4.0 Government Furnished: Technical Contact
Dr. Joseph Ringbauer
(573) 882-4448 joseph.ringbauer@usda.gov
5.0 Deliverables / Schedule: The Bead Beating Grinder should be shipped within 30 days after the contract is awarded to 1503 S. Providence, Research Park Columbia, MO 65203. Any deviation from that schedule due to unforeseen issues should be communicated to the buyer immediately.
6.0 Travel: Not applicable.
mailto:joseph.ringbauer@usda.gov
Statement of Work / Specification Document Bead Beating Grinder and Lysis System
7.0 Contractor’s Key Personnel: Not applicable.
8.0 Security Requirements: Not applicable.
9.0 Data Rights: Not applicable.
10.0 Section 508 – Electronic and Information Technology Standards:
Not applicable.
File details come from the government source that posted it. Updated .