Statement of Work.docx

DOCX document 16 MB Posted

Attached to
John Deere 5055 Utility Tractor Or Equivalent Federal contract opportunity
Solicitation number
12805B20Q0221
Issued by
Department of Agriculture Agricultural Research Service Field Research Implementation and Information Delivery Plains Area

View the file

Other files for this federal contract opportunity

Other files attached to John Deere 5055 Utility Tractor Or Equivalent, newest first.
File Type Posted
SF-18.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DESCRIPTION / SPECIFICATION / STATEMENT OF WORK

PURPOSE AND CONTENT

The purpose is to select a vendor to supply an agricultural tractor with front-end loader for use at the Southern Plains Range Research Station (SPRRS) at the USDA-ARS SPRRS, 2000 18th St., Woodward Oklahoma 73801. The tractor will be delivered to 2000 18th St., Woodward Oklahoma 73801.

BACKGROUND

The Facilities and Site The SPRRS is seeking to purchase an agricultural tractor with loader to assist technicians in the management and maintenance of the Southern Plains Range Research Station. The tractor must meet or exceed the requirements of specifications listed below.

System Requirements and Specifications

1. Engine to have a minimum net horsepower of 59 at the manufacture’s recommended rpm.

2. Engine to have 3 cylinders, diesel, wet sleeve cylinder liners, and cold starting aids.

3. Engine coolant heater.

4. PTO to have a minimum net horsepower of 41 at the manufacture’s recommended rpm.

5. The tractor will use diesel as fuel and have a minimum tank capacity of 19 gallons.

6. Fuel moisture separator required.

7. The tractor must have a hydraulic oil flow of a minimum of 17 gallons per minute.

8. Have a transmission with 9F/3R.

9. Power steering.

10. Category II, 3-point hitch with draft control including: 2 telescoping lower links with stabilizers or anti-sway bars and two remote raise/lower controls.

11. Draft sensing on lower link required.

12. PTO with guard including 540 rpm.

13. Brakes to be hydraulically actuated wet disks with integrated park-lock system.

14. Tractor to include the manufactures standard lighting systems including instrument gauges and panel, warning lights, oil pressure, alternator, and PTO engagement.

15. Final drive to be planetary.

16. Vertical exhausts stack with a 90-degree spout or a rain cap.

17. Differential lock required.

18. Twelve-volt electrical system with key start.

19. Both hand and foot throttles

20. Warning lights required.

21. Factory installed joystick control with 2 function mid-mount valve for loader operation.

22. Open-operators’ station.

23. An unballasted weight of 4,524 pounds minimum shipping weight with factory standard equipment.

24. SMV equipped.

25. Tractor to contain all equipment as advertised as standard by the manufacture.

26. Front tire size of 7.50-16 in. 6PR F2 Bias

27. Rear tire size of 16.9-28 in. 6PR R1 Bias

28. 4 95-lb rear-wheel weights, 2 installed on each side.

29. To include all standard warranties.

Trade

1. Ford 800 Series tractor

2. SN 124994

3. Total hours unknown, 514 hours on newer tachometer.

4. Runs, needs new starter switch.

5. Portion of hood missing.

6. Buyer reserves right to accept or reject trade allowance.

Approvals All equipment designs will be approved by the SPRRS Research Leader.

Contact Stacey Gunter, Research Leader Southern Plains Range Research Station USDA, Agricultural Research Service 2000 18th Street Woodward, OK 73801 Phone: 580-256-7449, Fax: 580-256-1322, Email, stacey.gunter@usda.gov image2.jpg image4.jpeg image1.jpg image2.jpeg

File details come from the government source that posted it. Updated .