Statement of Work.docx

Statement of Work Global Navigation Satellite System Simulator 10 February 2022

1.0 BACKGROUND

The Naval Air Warfare Center Weapons Division (NAWCWD), China Lake requires the purchase of a new Global Navigation Satellite System (GNSS) Simulator. A GNSS Simulator is a computer equipped with radio frequency (RF) equipment that generates Global Positioning System (GPS) signals virtually identical to the signals produced by actual GPS satellites. A controlled, customizable simulation of GPS signals allows users to test GPS equipment and develop and evaluate GPS and navigation scenarios that may occur in the field.

Established in 2018, the NAWCWD GPSET was formed with the intent of making NAWCWD a center of expertise on GPS matters for the entire Navy, especially as M-Code (Military Code) implementation becomes an increasingly urgent priority for the entire DoD. M-Code is the successor to the USG’s Y-Code, an encrypted jam- and spoof- resistant GPS signal available to authorized users. M-Code provides a more robust anti-jam and anti-spoof signal than Y-Code.

A GNSS Simulator is a key part of assisting GPSET customers in test and evaluation efforts leading to fleet-wide deployment of M-Code weapons. As a result of this action, a new GNSS Simulator will be delivered to the Global Positioning System Enterprise Team (GPSET), Code D552100.

Scope of Work

The contractor shall provide a GNSS (Global Navigation Satellite System) Simulator that, at a minimum, meets the specification requirements outlined below in Section 3.0. Delivery is required to NAWCWD China Lake, California No Later Than (NLT) 12 weeks after contract award.

2.0 APPLICABLE DOCUMENTS

2.1 IS-GPS-200 (NAVSTAR GPS Space Segment/Navigation User Interfaces), Rev. M, 21 May 2021

2.2 IS-GPS-153 (GPS User Equipment Interface Specification For The GPS Standard Serial Interface Protocol (GSSIP) Of DoD Standard GPS UE Radio Receivers), Rev. D, 23 July 2007

2.3 (CUI//DISTRIBUTION D) ICD-GPS-700 (NAVSTAR GPS Military-Unique Space Segment/User Segment Interfaces), Rev. K, 3 May 2021

3.0 REQUIREMENTS

The contractor shall supply a new GNSS Simulator that meets or exceeds performance described in the sections below. The vendor shall also provide delivery of the equipment.

GPS (Global Positioning System) Enterprise Team (GPSET) Requirements

3.1 GNSS Codes

3.1.1 GPS L1 C/A, P, Y, Advanced Encryption Standard (AES) Military Code (M-Code), Modernized Navstar Security Algorithm (MNSA), C

3.1.2 GPS L2 P, Y, AES M-Code, MNSA, C

3.1.3 GPS L5

3.1.4 SBAS (Satellite-based augmentation system)

3.1.5 Galileo E1

3.1.6 Galileo E5a, E5b

3.2 Jamming

3.2.1 Continuous Wave (CW)

3.2.2 Chirp

3.2.3 Binary Phase-Shift Keying (BPSK)

3.2.4 Blue Force Electronic Attack (BFEA)

3.2.5 Customizable jamming waveforms

3.2.6 Independent jamming signal power level adjustment

3.3 Spoofing

3.3.1 Full constellation spoofing

3.3.2 Repeater simulation

3.4 Other signals of interest and signal capabilities

3.4.1 Custom signal support, including capability to develop new constellation models

3.4.2 Multipath simulation

3.4.3 Terrain interference simulation

3.4.4 Common programming language API

3.4.5 Adjustable signal output level

3.4.6 Clock error simulation

3.4.7 External trajectory input

3.4.8 Receiver antenna pattern model

3.4.9 Inertial Measurement Unit (IMU) simulation

3.5 Support Software

3.5.1 Test configuration and administration

3.5.2 GPS receiver data acquisition

4.0 DELIVERY

4.1. The contractor shall deliver and install the GNSS Simulator deliverables to NAWCWD, China Lake, Ca 93555 Building 1400, room A-8 no later than 12 weeks after award.

4.2 The contractor shall include a line item for the price of delivery to NAWCWD, China Lake, CA 93555.

5.0 SECURITY

5.1 Information Security. Direct Support contractor personnel working under the purview of a DoN Commanding Officer/Commander shall comply with the local security provisions and the requirements of SECNAV M-5510.36B (series). The contractor shall implement and maintain security procedures and controls to prevent unauthorized disclosure of controlled unclassified information and to control distribution of controlled unclassified information in accordance with DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), and SECNAV M-5510.36B

CUI information generated and/or provided under this contract shall be marked and safeguarded as specified in DoDI 5200.48, Controlled Unclassified Information (CUI). Contractor shall not store or transmit CUI on personal information technology systems or via personal e-mail. Unclassified e-mail containing any DoD CUI shall be encrypted. Prior to sending CUI to any non-Navy Marine Corps Internet (NMCI) addressees, the sender must first positively verify all recipients are authorized access to CUI and have need-to-know. Non-NMCI recipients must have a DoD compliant Private Key Infrastructure (PKI) certificate that enables electronic transmission via unclassified networks while protecting the CUI with a digital signature and encryption.

5.2 Operations Security (OPSEC). The contractor shall comply with the OPSEC requirements outlined within the DD Form 254.

The Contractor shall develop, implement, and maintain an OPSEC program to protect controlled unclassified activities, information, equipment, and material used or developed by the contractor and any subcontractor during performance of the contract. The contractor shall be responsible for the subcontractor implementation of the OPSEC requirements. The OPSEC program shall be in accordance with DoD and DON operations security (OPSEC) requirements, to include:

1) Assignment of responsibility for OPSEC direction and implementation

2) Planning guidance for the use of the OPSEC Process to identify vulnerabilities and apply applicable countermeasures (Contact NAWCWD Industrial Security Office for a current OPSEC Annex and CI Guide)

3) Establishment of OPSEC education and awareness training

4) Provisions for management, annual review, and evaluation of OPSEC programs

5) Oversight for accountability of OPSEC requirements to subcontractors