Stament of Work_ Rev 18 Oct 23.pdf

STATEMENT OF WORK

FOR

88 Ton CNC Press Brake

18 October 2023

National Museum of the United States Air Force, Wright-Patterson Air Force Base, Ohio

1. SCOPE OF WORK: The National Museum of the United States Air Force (NMUSAF) located at Wright-Patterson Air Force Base, Ohio (WPAFB) requires an 88 Ton CNC press brake, with accessories, for replication and fabrication of original parts for historical restoration purposes as part of the Department of The Air Force Heritage Program on over 2,500 aerospace vehicles, missiles, and drones in accordance with AFI 84-103 section 8.3.

2. TECHNICAL REQUIREMENTS: This document covers the purchase, installation, warranty, training, and commissioning of an 88 Ton CNC Press Brake.

2.1. Furthermore, the press brake must conform to the following specifications:

Max Weight 13900 LBS Oil Capacity DNE 10 Gallons Ram Position Repeatability Minimum .00004” Length DNE 176” Height DNE 110” Width DNE 70” Power 208 Volt 3 Phase Power Amps DNE 25 AMP Bend Length 102” Minimum Stroke Length 9.84” Minimum Open Height 20.5” Minimum Throat Depth 17.7” Minimum Between Housings 87” Minimum Approach Speed 5.9” Per Second Minimum Bending Speed .5” Per Second Minimum Return Speed 5.9” Per Second Minimum Movement Range L1/L2 Axis: 0 to 27” Minimum Movement Range Y1/Y2: Axis: +/- 49” Minimum Movement Range Z1/Z2: Axis 1.2 to 10.0” Minimum Feed Speed L Axis: 1,180” Per Minute Minimum Feed Speed Y Axis: 2,360” Per Minute Minimum Feed Speed Z Axis: 390” Per Minute Minimum L1/L2 Accuracy .0004” Minimum

Y1/Y2 Accuracy .004” Minimum Z1/Z2 Accuracy .004” Minimum Axis Control 10 Minimum Hydraulic Motors Foot Pedal Activated Required

Foot Pedal 3 Position Required (Stop/Actuated/Emergency Stop)

Natural Crowning System Required Controller Touch Screen Required

Data Input 4 Methods Required (3D Graphics Mode/ 2D Graphics Mode/ Angle Mode/ Depth Mode)

Control Operation At Machine Interface 2 Settings Required (Expert Mode/Lite Mode)

Bending Sequencing At Machine Interface 2 Settings Required (Automatic/Manual) Screen Display Touch Screen 18.5” Minimum Hand Wheel Required 2D Finger Drawn At Machine Interface Touch Screen Required Configuration Each Operator Minimum Back Gauge 6 Axis Minimum Safety Light Device Required S-Grip M Punch Holders Required Warranty 2 Year Shipping to Destination Required Installation Supervision Required Training Onsite Required

2.2 Tooling must include the following or equivalent:

2.2.1 11147061 AFH Gsnck Punch, R.024" x 86°, L=32.87" 1 Ea

2.2.2 11147561 AFH Gsnck Punch, R.024" x 86°, L=20.08" 1 Ea

2.2.3 11147762 AFH Gsnck Punch, R.024" x 86°, L=7.87" 1 Ea

2.2.4 11147861 AFH Gsnck Punch, R.024" x 86°, Sect. 1 Ea

2.2.5 11147961 AFH Gsnck Punch, R.024" x 86°, Ear Set 1 Ea

2.2.6 11147311 AFH Gsnck Punch, R.060" x 86°, L=32.87" 1 Ea

2.2.7 11147312 AFH Gsnck Punch, R.060" x 86°,L=20.08" 1 Ea

2.2.8 11147321 AFH Gsnck Punch R.060" x 86°, Sect. 1 Ea

2.2.9 11509999 AFH Gsnck Punch R.060" x 86°, Ear Set 1 Ea

2.2.10 11147331 AFH Gsnck Punch R.090" x 86°, L=32.87" 1 Ea

2.2.11 11147332 AFH Gsnck Punch R.090" x 86°, L=20.08" 1 Ea

2.2.12 11147341 AFH Gsnck Punch R.090" x 86°, Sect. 1 Ea

2.2.13 11509999 AFH Gsnck Punch R.090" x 86°, Ear Set 1 Ea

2.2.14 11147351 AFH Gsnck Punch R.118" x 86°, L=32.87" 1 Ea

2.2.15 11147352 AFH Gsnck Punch R.118" x 86°, L=20.08" 1 Ea

2.2.16 11147361 AFH Gsnck Punch R.118" x 86°, Sect. 1 Ea

2.2.17 11509999 AFH Gsnck Punch R.118" x 86°, Ear Set 1 Ea

2.2.18 11509999 AFH Gsnck Punch R.250" x 86°, L=32.87" 1 Ea

2.2.19 11509999 AFH Gsnck Punch R.250" x 86°, L=20.08" 1 Ea

2.2.20 11509999 AFH Gsnck Punch R.250" x 86°, L=Sect 1 Ea

2.2.21 11509999 AFH Gsnck Punch R.250" x 86°, Ear Set 1 Ea

2.2.22 11300611 AFH Acute Punch R.024x30°, L=32.87 1 Ea

2.2.23 11300612 AFH Acute Punch R.024x30°, L=20.08 1 Ea

2.2.24 11300614 AFH Acute Punch R.024x30°, L=7.87 1 Ea

2.2.25 11300613 AFH Acute Punch R.024x30°, Sect. 1 Ea

2.2.26 11300615 AFH Acute Punch R.024x30°, Ear Set 1 Ea

2.2.27 11509999 AFH Acute Punch R.060x30°, L=32.87" 1 Ea

2.2.28 11509999 AFH Acute Punch R.060x30°, L=20.08" 1 Ea

2.2.29 11509999 AFH Acute Punch R.060x30°, L=7.87" 1 Ea

2.2.30 11509999 AFH Acute Punch R.060x30°, L=Sect 1 Ea

2.2.31 11509999 AFH Acute Punch R.090x30°, L=32.87" 1 Ea

2.2.32 11509999 AFH Acute Punch R.090x30°, L=20.08" 1 Ea

2.2.33 11509999 AFH Acute Punch R.090x30°, L=7.87" 1 Ea

2.2.34 11509999 AFH Acute Punch R.090x30°, L=Sect 1 Ea

2.2.35 11509999 AFH Acute Punch R.090x30°, Ear Set 1 Ea

2.2.36 11509999 AFH Acute Punch R.118x30°, L=32.87" 1 Ea

2.2.37 11509999 AFH Acute Punch R.118x30°, L=20.08" 1 Ea

2.2.38 11509999 AFH Acute Punch R.118x30°, L=7.87" 1 Ea

2.2.39 11509999 AFH Acute Punch R.118x30°, L=Sect 1 Ea

2.2.40 11509999 AFH Acute Punch R.118x30°, Ear Set 1 Ea

2.2.41 11509999 AFH Acute Punch R.250x30°, L=32.87" 1 Ea

2.2.42 11509999 AFH Acute Punch R.250x30°, L=20.08" 1 Ea

2.2.43 11509999 AFH Acute Punch R.250x30°, L=7.87" 1 Ea

2.2.44 11509999 AFH Acute Punch R.250x30°, L=Sect 1 Ea

2.2.45 11509999 AFH Acute Punch R.250x30°, Ear Set 1 Ea

2.2.46 10170031 AFH Die V.236"(6mm) x 30°, L=32.87" 2 Ea

2.2.47 10170531 AFH Die V.236"(6mm) x 30°, L=20.08" 1 Ea

2.2.48 10170732 AFH Die V.236"(6mm) x 30°, L=7.87" 1 Ea

2.2.49 10170831 AFH Die V.236"(6mm) x 30°, Sect. 1 Ea

2.2.50 10174031 AFH Die V.472"(12mm) x 30°, L=32.87" 2 Ea

2.2.51 10174531 AFH Die V.472"(12mm) x 30°, L=20.08" 1 Ea

2.2.52 10174732 AFH Die V.472"(12mm) x 30°, L=7.87" 1 Ea

2.2.53 10174831 AFH Die V.472"(12mm) x 30°, Sect. 1 Ea

2.2.54 W0701201 Wing Bend Die, WB-120 L=1.969 1 Ea

2.2.55 W0701202 Wing Bend Die, WB-120 L=3.937 1 Ea

2.2.56 W0701203 Wing Bend Die, WB-120 L=7.874" 1 Ea

2.2.57 W0702301 Wing Bend Die, WB-230 L=1.969 1 Ea

2.2.58 W1702302 Wing Bend Die, WB-230 L=3.937 1 Ea

2.2.59 W2702303 Wing Bend Die, WB-230 L=7.874" 1 Ea

2.2.60 W0703501 Wing Bend Die, WB-350 L=1.969 1 Ea

2.2.61 W1703502 Wing Bend Die, WB-350 L=3.937 1 Ea

2.2.62 W2703503 Wing Bend Die, WB-350 L=7.874" 1 Ea

2.2.63 11908000 One-Touch Narrow Dist Piece Set 1 Ea

2.2.64 10184061 AFH Die V.157"(4mm) x 86°, L=32.87" 2 Ea

2.2.65 10184561 AFH Die V.157"(4mm) x 86°, L=20.08" 1 Ea

2.2.66 10184762 AFH Die V.157"(4mm) x 86°, L=7.87" 1 Ea

2.2.67 10184861 AFH Die V.157"(4mm) x 86°, Sect. 1 Ea

2.2.68 10172061 AFH Die V.394"(10mm) x 86°, L=32.87" 2 Ea

2.2.69 10172561 AFH Die V.394"(10mm) x 86°, L=20.08" 1 Ea

2.2.70 10172762 AFH Die V.394"(10mm) x 86°, L=7.87" 1 Ea

2.2.71 10172861 AFH Die V.394"(10mm) x 86°, Sect. 1 Ea

2.2.72 10176061 AFH Die V.551"(14mm) x 86°, L=32.87" 2 Ea

2.2.73 10176561 AFH Die V.551"(14mm) x 86°, L=20.08" 1 Ea

2.2.74 10176762 AFH Die V.551"(14mm) x 86°, L=7.87" 1 Ea

2.2.75 10176861 AFH Die V.551"(14mm) x 86°, Sect. 1 Ea

2.2.76 10182061 AFH Die V.984"(25mm) x 86°, L=32.87" 2 Ea

2.2.77 10182561 AFH Die V.984(25mm) x 86°, L=20.08 1 Ea

2.2.78 10182762 AFH Die V.984(25mm) x 86°, L=7.87 1 Ea

2.2.79 10182861 AFH Die V.984"(25mm) x 86°, Sect. 1 Ea

2.2.80 10854001 AFH Die V1.575 (40mm) x 84, L=32.87 2 Ea

2.2.81 10854002 AFH Die V1.575"(40mm) x 84°, L=20.08" 1 Ea

2.2.82 10854081 AFH Die V1.575"(40mm) x 84, Sect. 1 Ea

2.2.83 10037001 1V Die, V=1.969x85°, R.157, L=32.87 3 Ea

2.2.84 10615001 #15 Punch Holder, L=32.87" 1 Ea

2.2.85 10017371 Radius Ruler Punch, R.375, L=32.87 1 Ea

2.2.86 10017501 Radius Ruler Punch, R.500, L=32.87 1 Ea

2.2.87 10017621 Radius Ruler Punch, R.625, L=32.87 1 Ea

2.2.88 10017751 Radius Ruler Punch, R.750, L=32.87 1 Ea

2.2.89 10017871 Radius Ruler Punch, R.875, L=32.87 1 Ea

2.2.90 10017001 Radius Ruler Punch, R1.00, L=32.87 1 Ea

2.2.91 10037001 1V Die, V=1.969x85°, R.157, L=32.87 1 Ea

2.2.92 10038001 1V Die, V=2.48x85°, R.197, L=32.87 1 Ea

2.2.93 10013601 1V Die, V=3.15x85°, R.236, L=32.87 1 Ea

2.2.94 10018601 1V Die, V=3.937x85°, R.276, L=32.87 1 Ea

2.2.95 10500081 Large V Die Holder, L=32.87 1 Ea

2.2.96 11030001 Sleeved Rad Ruler Set, L=32.87", 1-Tch 1 Ea

1. DELIVERY, INSTALLATION AND TRAINING: Delivery of equipment, freight, installation, integration and set up shall be completed by 90 calendar days after date of contract award to the following address:

NMUSAF

1030 C Street

Area B, Hanger 4D WPAFB, Ohio 45433

1.1. A Point of Contact (POC) will be identified in the schedule of the final awarded contract who will be responsible for coordinating delivery, installation, and training.

2. WARRANTY: At least a one-year manufacturer warranty shall be honored by contractor for all products delivered for this requirement.

3. QUALIFYING COUNTRY PRODUCTS: All products delivered to satisfy these requirements shall be manufactured in a qualifying country source in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.872. Products from other than qualifying countries will not be accepted, and any costs associated with products from other than qualifying countries, including shipping, etc., shall be at the contractor’s expense.

4. INVOICE AND PAYMENT: The contractor shall be paid upon submission of a properly prepared invoice and after final inspection and acceptance has been made. A proper invoice shall cite the contractor’s name and address, invoice number, invoice date, order number, contract line item number (CLIN), description of the supplies or service, unit of issue, unit price and extended price, terms of any prompt payment discount offered, and who to notify in the event that the invoice is defective.

4.1. The invoice shall be submitted to the Wide Area Work Flow (WAWF) in accordance with the terms of the final contract award.

5. DELIVERY PROCEDURES COMMERCIAL VEHICLES:

5.1. All vehicles larger than a large pick-up truck are required to be inspected by the Wright-

Patterson Air Force Base Commercial Vehicle Delivery Gate (CVDG) prior to entering the installation. Vehicles to be inspected include, but are not limited to, the following:

5.1.1. Step van/panel truck

5.1.2. Tractor/trailer, box and flat-bed containing cargo

5.1.3. Tanker trucks

5.1.4. Box truck

5.1.5. Tour buses

5.1.6. Garbage/recycled waste trucks

5.1.7. Concrete trucks/mixers, dump trucks

5.1.8. Cranes, recreational vehicles, petroleum tanker

This inspection will be conducted at Wright-Patterson AFB Gate 26A.

5.2. The following are exemptions to vehicles utilizing the CVDG:

5.2.1. If the vehicle has the product inside (concrete and asphalt trucks) and timely delivery is necessary due to product deterioration it does not need to enter the CVDG. To bypass the CVDG, the contractor shall submit a list containing drivers’ names, social security numbers and the state in which the driver's license is held for those drivers who will be entering the base. This shall be accomplished 24 hours prior to requested entry time. If entry is requested on Monday, this list shall be submitted by Friday at 1630 hours. All lists shall be submitted to the 88th ABW/CE Directorate contract inspector. The only gates that may be used under this exemption shall be 15A, 26A, 38A, and gate 1B. If the driver's name is not on the list, he/she will not be allowed access to the installation through these gates and the base will not assume liability for denied access.

5.2.2. If a delivery vehicle must exit, and then re-enter the base to complete its route, the vehicle shall be resealed upon exiting the base. After initially passing through the commercial vehicle delivery gate, trucks shall be resealed at Gates 15A, 38A and 22B. The resealing of the trucks will allow them to continue to any other area of the installation (Areas A, B, or Kittyhawk) without reprocessing through the CVDG. To receive resealing assistance, the drivers shall physically stop at one of the three authorized gates and request the installation entry controller to reseal their truck and provide the next location of their delivery. The controller will reseal the truck and give the delivery driver a pre-clearance form. The driver shall present the pre-clearance form to the entry controller at the next point of installation entry. This reentry can be through any base gate.

5.3. Vehicles may be subject to an inspection at any of installation entry control points during a directed random antiterrorism measure (RAM) Any commercial vehicle, regardless of size, can be directed to the CVDG at the discretion of the installation entry controller.