SPRRA122D0025 bilateral signed.pdf

2022SEP13

2022SEP13

AWARD/CONTRACT 1. This Contract Is A Rated Order Under DPAS (15 CFR 700)

Rating Page Of Pages

2. Contract (Proc. Inst. Ident.) No. 3. Effective Date 4. Requisition/Purchase Request/Project No.

5. Issued By Code 6. Administered By (If Other Than Item 5) Code e-mail address:

7. Name And Address Of Contractor (No., Street, City, County, State and Zip Code) 8. Delivery

FOB Origin Other (See Below)

9. Discount For Prompt Payment

10. Submit Invoices Item (4 Copies Unless Otherwise Specified)

Code Facility Code To The Address Shown In:

11. Ship To/Mark For Code 12. Payment Will Be Made By Code

13. Authority For Using Other Than Full And Open Competition: 14. Accounting And Appropriation Data

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( )

15A. Item No. 15B. Supplies/Services 15C. Quantity 15D. Unit 15E. Unit Price 15F. Amount

15G. Total Amount Of Contract

16. Table Of Contents

(X) Sec. Description Page(s) (X) Sec. Description Page(s)

Part I - The Schedule Part II - Contract Clauses A Solicitation/Contract Form I Contract Clauses

B Supplies or Services and Prices/Costs Part III - List Of Documents, Exhibits, And Other Attachments

C Description/Specs./Work Statement J List of Attachments

D Packaging and Marking Part IV - Representations And Instructions

E Inspection and Acceptance K Representations, Certifications, and F Deliveries or Performance Other Statements of Offerors G Contract Administration Data L Instrs., Conds., and Notices to Offerors

H Special Contract Requirements M Evaluation Factors for Award Contracting Officer Will Complete Item 17 (Sealed-Bid or Negotiated Procurement) Or 18 (Sealed-Bid Procurement) As Applicable

17. Contractor’s Negotiated Agreement (Contractor is required to sign this document and return copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all the services set forth or otherwise identified above and on any continuation sheets for the consideration stated herein. The rights and obligations of the parties to this contract shall be subject to and governed by the following documents: (a) this award/contract, (b) the solicitation, if any, and (c) such provisions, representations, certifications, and specifications, as are attached or incorporated by reference herein. (Attachments are listed herein.)

18. Sealed-Bid Award (Contractor is not required to sign this document.) Your bid on Solicitation Number , including the additions or changes made by you which additions or changes are set forth in full above, is hereby accepted as to the items listed above and on any continuation sheets. This award consummates the contract which consists of the following documents: (a) the Government’s solicitation and your bid, and (b) this award/contract. No further contractual document is necessary. (Block 18 should be checked only when awarding a sealed-bid contract.)

19A. Name And Title Of Signer (Type Or Print) 20A. Name Of Contracting Officer

19B. Name of Contractor 19c. Date Signed 20B. United States Of America 20C. Date Signed

By By

(Signature of person authorized to sign) (Signature of Contracting Officer)

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 26 (Rev. 5/2011) Previous edition is NOT usable Prescribed By GSA - FAR (48 CFR) 53.214(a)

DOA1

SPRRA1-22-D-0025 2022SEP13 SEE SCHEDULE

SPRRA1

DEFENSE LOGISTICS AGENCY

5201 MARTIN ROAD/DLA-AVN-AH

REDSTONE ARSENAL AL 35898-7340

KIMBERLEY J. COLLIER

KIMBERLEY.COLLIER@DLA.MIL

S3306A

DCMA SYRACUSE

615 ERIE BLVD., WEST

SUITE 300

SYRACUSE NY 13204-2408

38443

SKF USA INC

ONE MAROCO RD

FALCONER, NY 14733-9705

X

SEE SCHEDULE

HQ0337

DFAS-COLUMBUS CENTER

NORTH ENTITLEMENT OPERATIONS

P.O. BOX 182317

COLUMBUS OH 43218-2317

SEE SCHEDULE

$0.00

X

2 signed

IMELDA CHAGOLLA

IMELDA.CHAGOLLA@DLA.MIL (256)690-5419

/SIGNED/ 2022SEP13

1 45

X 1

X 4

X 11

X 12

X 20

X 22

X 30

X 45

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: KIMBERLEY J. COLLIER

Buyer Office Symbol/Telephone Number: ZDB-B (AVN DIV)/(256)842-7556

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

Type of Business: Large Business Performing in U.S.

Surveillance Criticality Designator: C

Contract Expiration Date: 2026AUG31

*** End of Narrative A0000 ***

A-1. THIS REQUIREMENT IS RESTRICTED TO SKF USA,INC.,CAGE 38443 IAW 10 U.S.C. 2304 (c)(1) FAR 6.302-1. ONLY ONE RESPONSIBLE SOURCE AND NO

OTHER SUPPLIES OR SERVICES WILL SATISFY AGENCY REQUIREMENTS.

A-2. THIS REQUIREMENT IS IN SUPPORT OF THE CH-47 BL WEAPON SYSTEM.

A-3. CONTRACTOR'S FIRST ARTICLE TEST HAS BEEN WAIVED PER PAID ACTION I-26109. _______________

A-4. FLIGHT SAFETY/CRITICAL SAFETY ITEM (CSI)IS REQUIRED. ___________

A-5. RFID IS NOT REQUIRED. ____________

A-6. GOVERNMENT TESTED PRODUCTION LOT TEST IS REQUIRED, ONLY A QTY OF 1 WILL BE SHIPPED TO REDSTONE ARSENAL, AL (W31P0W) TO BE TESTED. ___________

ALL MANUFACTURING LOTS WILL BE SUBJECTED TO DESTRUCTIVE TESTING.

A-7. IUID MARKINGS HAS BEEN WAIVED PER PAID ACTION I-26236. _______________

A-8. SNRR IS REQUIRED. ___________

A-9. TAMMS IS NOT REQUIRED. _______________

A-10. THIS IS A FOUR (4) YEAR INDEFINITE DELIVERY REQUIREMENTS(IDR), FIRM FIXED PRICE EFFORT.

A-11. CONTRACTOR POINT OF CONTACT INFORMATION:

NAME: CINDY LAMB __________

TELEPHONE NUMBER:(716)661-2819 _____________

E-MAIL ADDRESS: CINDY.S.LAMB@SKF.COM ____________________

A-12. DCMA ACO POINT OF CONTACT INFORMATION:

NAME: BRIAN MOELLER _____________

TELEPHONE NUMBER:(716)551-4284 _____________

E-MAIL ADDRESS: BRIAN.MOELLER1.CIV@MAIL.MIL ___________________________

A-13. CONTRACT SPECIALIST POINT OF CONTACT INFORMATION:

NAME: KIMBERLEY COLLIER _________________

OFFICE SYMBOL: DLA-AVN-AHCA ____________

TELEPHONE NUMBER: 256-690-5426 ____________

E-MAIL ADDRESS: kimberley.collier@dla.mil _________________________

A-14. FUNDS WILL BE OBLIGATED/CITED UPON ISSUANCE OF EACH DELIVERY ORDER.

A-15. ACCELERATED DELIVERY IS ENCOURAGED AND AUTHORIZED AT NO ADDITIONAL COST TO THE GOVERNMENT

A-16. SKF AND THE GOVERNMENT WILL COME TO A MUTUALLY AGREED TO METHOD OF SUBMITTING DOCUMENTATION REQUIRED FOR QE-STD-1, CRITICAL SAFETY

CHARACTERISTICS, FROZEN PLANNING, AND MANUFACTURING PLANS. SKF WILL NOT SUBMIT THEIR INTELLECTUAL PROPERTY (IP), ALL OF THEIR

DOCUMENTATION IS AVAIALABLE FOR REVIEW ON SITE AT SKF AEROENGINE NA, FALCONER, NY.\~ IF ANY POTENTIAL CHANGES/UPDATES TO THE PREVIOUSLY

APPROVED MANUFACTURING PLAN/DOCUMENTATION REQUIRE REVIEW, SKF WILL CONDUCT A VIRTUAL REVIEW OF THIS DOCUMENTATION WITH ENGINEERING

SUPPORT ACTIVITY (ESA. IN REGARDS TO THE PRODUCTION LOT TEST, SKF AGREES TO PROVIDE A CERTIFICATE OF CONFORMANCE

A-17. LONG LEAD TIME AND OR LONG TERM CONTRACTS

2 45

SPRRA1-22-D-0025

SKF USA INC

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

FOR LONG LEAD TIME ITEMS AND/OR LONG TERM CONTRACTS, THE PARTIES RECOGNIZE THERE IS A RISK THAT PART(S) OR COMPONENT(S) REQUIRED FOR

PERFORMANCE OF THE CONTRACT/PURCHASE ORDER MAY BECOME UNAVAILABLE DUE TO OBSOLESCENCE. UPON RECEIPT OF THE CONTRACT/PURCHASE ORDER, CONTRACTOR IS RESPONSIBLE FOR VERIFYING ITS SOURCES OF SUPPLY. IF AT ANY TIME DURING THE COURSE OF PERFORMANCE CONTRACTOR BECOMES AWARE

THAT IT IS UNABLE TO PROCURE A PART OR COMPONENT NECESSARY TO FULFILL THE REQUIREMENTS OF THE CONTRACT, THE CONTRACTOR SHALL NOTIFY THE

CONTRACTING OFFICER IN WRITING WITHIN THIRTY DAYS. NOTIFICATION SHALL INCLUDE CONTRACTORS RECOMMENDATION FOR CORRECTION OF THE PROBLEM, IF POSSIBLE, WITH ESTIMATED COST AND SCHEDULE IMPACT, IF ANY. THE CONTRACTING OFFICER WILL DETERMINE THE APPROPRIATE COURSE OF ACTION

AND PROVIDE DIRECTION TO THE CONTRACTOR. IN NO EVENT WILL CONTRACTOR PROCEED WITH IMPLEMENTATION OF ITS RECOMMENDATION WITHOUT WRITTEN

DIRECTION FROM THE CONTRACTING OFFICER. AT THE SOLE DISCRETION OF THE CONTRACTING OFFICER, THE CONTRACT MAY BE TERMINATED IN WHOLE OR IN

PART, AS APPROPRIATE.

A-18. Production Lot Test (PLT) _________________________

The contractor shall withhold (25%) of the production lot quantity pending ESA approval of the lot for use. The balance of 75% the production lot may be shipped prior to ESA approval.

Within 120 calendar days after the Government receives the quality verification sample(s), the Contracting Officer will notify the

Contractor, in writing, of the acceptance or rejection of the quality verification sample(s). The notice of acceptance shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of rejection shall cite reasons for the rejection.

*** END OF NARRATIVE A0001 ***

3 45

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

0001 BEARING, BALL, DUPLEX

NSN: 3110-01-111-5584

Mfr CAGE: 38443

Mfr Part Number: 2-300-059-01

THIS IS A FOUR YEAR REQUIREMENTS TYPE CONTRACT ____

SPRRA1-22-D-0025. FUNDS WILL BE OBLIGATED/CITED

UPON THE ISSUANCE OF EACH DELIVERY ORDER. THE

ESTIMATED QUANTITIES HEREIN ARE NOT A

REPRESENTATION TO AN OFFEROR OR CONTRACTOR THAT THE

ESTIMATED QUANTITY WILL BE REQUIRED OR ORDERED, OR

THAT CONDITIONS AFFECTING REQUIREMENTS WILL BE

STABLE OR NORMAL.

THE GOVERNMENT WILL ONLY BE OBLIGATED TO ORDER THE

STATED GUARANTEED MINIMUM QUANTITY OF 30 EACH.

THE GOVERNMENT IS NOT OBLIGATED TO ISSUE ANY

ORDERS AGAINST THIS CONTRACT OVER THE GUARANTEED

CONTRACT MINIMUM AMOUNT; HOWEVER, THE GOVERNMENT

RESERVES THE RIGHT TO ORDER ANY QUANTITY ABOVE THE

GUARANTEED CONTACT MINIMUM QUANTITY FOR THE

DURATION OF THIS CONTRACT.

THE GOVERNMENT HAS SEGREGATED THE ESTIMATED

QUANTITIES INTO FOUR, ONE-YEAR ORDERING PERIODS.

HOWEVER, THIS DOES NOT PREVENT THE GOVERNMENT FROM

EXERCISING ITS RIGHTS UNDER FAR 52.216-21 AT ANY

TIME DURING THE REQUIRMENT PERIOD.

THE GUARANTEED MINIMUM QUANTITY TO BE AWARDED

SIMULTANEOUSLY WITH THE AWARD OF THE BASIC CONTRACT

IS 30 EACH. THE MINIMUM DELIVERY ORDER QUANTITY IS ___

25 EACH. AT NO TIME WILL THE CONTRACTOR BE REQUIRED

TO SHIP MORE THAN 25 UNITS PER MONTH UNLESS ___

MUTUALLY AGREED TO BY BOTH PARTIES. DELIVERY ORDERS

ISSUED UNDER THIS CONTRACT SHALL NOT HAVE

OVERLAPPING DELIVERY SCHEDULES.

THE CONTRACT IS FOR THE SUPPLIES AS DETAILED ON THE

FOLLOWING PAGES. OFFERORS ARE CAUTIONED TO INSURE

THAT OFFERS ARE PROVIDED ON ALL QUANTITIES.

FAILURE TO PROPOSE ALL CLINS, MAY RESULT IN A

DETERMINATION OF NON RESPONSIVENESS. AN OFFER MAY

BE REJECTED IF THE GOVERMENT DETERMINES THAT THE

OFFER IS MATERIALLY UNBALANCED OR IF THE OFFER

CONTAINS UNBALANCED PRICING.

YEAR 1 WILL BE FROM DATE OF AWARD THROUGH DAY 365

DAYS AFTER CONTRACT AWARD (DACA).

YEAR 2 WILL BEGIN 366 DACA AND END 730 DACA.

YEAR 3 WILL BEGIN 731 DACA AND END 1,095 DACA.

YEAR 4 WILL BEGIN 1,096 DACA AND END 1,460 DACA.

ALL REFERENCES TO F.O.B. ORIGIN THROUGHOUT THIS

4 45

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

CONTRACT APPLY TO ALL QUANTITIES ORDERED AFTER THE

FIRST DELIVERY ORDER.

THE ESTIMATED (E) QUANTITY LISTED HEREIN DOES NOT

COMMIT THE GOVERNMENT TO ORDER THAT OR ANY QUANTITY

ABOVE THE MINIMUM QUANTITY.

(End of narrative A001)

0001AB PRODUCTION QUANTITY W/O CONTRACTOR TESTED FI 30 (E) EA $ 2,433.50000 ____________________________________________ ______________

PROGRAM YEAR: 1

COMMODITY NAME: BEARING, BALL, DUPLEX

CLIN CONTRACT TYPE:

Firm Fixed Price

PSC: 3110

IN THE EVENT AN ORDER IS ISSUED FOR QUANTITIES

OUTSIDE THE RANGES LISTED ABOVE, THE UNIT PRICE

ASSOCIATED WITH THE HIGHEST LISTED RANGE WILL BE

APPLIED TO THAT ORDER.

(End of narrative C001)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-129 MARKINGS SHALL APPLY

UNIT PACK: 001 INTERMEDIATE PACK: 000

LEVEL PRESERVATION: Military

LEVEL PACKING: A

ADDITIONAL PACKAGING REQUIREMENTS

ESTIMATED MAXIMUM UNIT PACKAGE WEIGHT (POUNDS) AND

SIZE (INCHES):

WT [2.5]

LN [6.0]

WD [6.0]

DP [5.5]

MIL-STD-2073-1 CODES, APPENDIX J

JI/A/MP [45] JII/CD [1] JIII/PM [17] JIV/WM [GB]

JV/CD [NA] JVI/CT [B] JVII/UC [KF] JVII/IC [00]

JIX/A/PK [F] JX/SM [17] JVIIIA/OPI [M]

ALL WOOD PACKAGING MATERIAL (WPM) MUST BE ISPM-15

COMPLIANT.

SUPPLEMENTAL INFORMATION:KF=8110-00-222-3017,MS24347-1

REUSABLE CONTAINER WILL BE CONTRACTOR FURNISHED

MATERIAL

5 45

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

FOB POINT: Destination

DELIVERIES SHALL COMMENCE 360 DAYS AFTER THE DATE

RECEIPT OF ORDER (DARO).

(End of narrative F001)

0002 BEARING, BALL, DUPLEX

NSN: 3110-01-111-5584

Mfr CAGE: 38443

Mfr Part Number: 2-300-059-01

0002AA PRODUCTION QUANTITY ORDERING PERIOD TWO 32 (E) EA $ 2,530.84000 _______________________________________ ______________

PROGRAM YEAR: 2

COMMODITY NAME: BEARING, BALL, DUPLEX

CLIN CONTRACT TYPE:

Firm Fixed Price

PSC: 3110

IN THE EVENT AN ORDER IS ISSUED FOR QUANTITIES

OUTSIDE THE RANGES LISTED ABOVE, THE UNIT PRICE

ASSOCIATED WITH THE HIGHEST LISTED RANGE WILL BE

APPLIED TO THAT ORDER.

(End of narrative C001)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-124 MARKINGS SHALL APPLY

UNIT PACK: 001 INTERMEDIATE PACK: 000

LEVEL PRESERVATION: Military

LEVEL PACKING: A

ADDITIONAL PACKAGING REQUIREMENTS

ESTIMATED MAXIMUM UNIT PACKAGE WEIGHT (POUNDS) AND

6 45

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SIZE (INCHES):

WT [2.5]

LN [6.0]

WD [6.0]

DP [5.5]

MIL-STD-2073-1 CODES, APPENDIX J

JI/A/MP [45] JII/CD [1] JIII/PM [17] JIV/WM [GB]

JV/CD [NA] JVI/CT [B] JVII/UC [KF] JVII/IC [00]

JIX/A/PK [F] JX/SM [17] JVIIIA/OPI [M]

ALL WOOD PACKAGING MATERIAL (WPM) MUST BE ISPM-15

COMPLIANT.

SUPPLEMENTAL INFORMATION:KF=8110-00-222-3017,MS24347-1

REUSABLE CONTAINER WILL BE CONTRACTOR FURNISHED

MATERIAL

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

FOB POINT: Origin

DELIVERIES SHALL COMMENCE 360 DAYS AFTER THE DATE

RECEIPT OF ORDER (DARO).

(End of narrative F001)

0003 BEARING, BALL, DUPLEX

NSN: 3110-01-111-5584

Mfr CAGE: 38443

Mfr Part Number: 2-300-059-01

0003AA PRODUCTION QUANTITY ORDERING PERIOD THREE 32 (E) EA $ 2,632.33000 _________________________________________ ______________

PROGRAM YEAR: 3

COMMODITY NAME: BEARING, BALL, DUPLEX

CLIN CONTRACT TYPE:

Firm Fixed Price

PSC: 3110

7 45

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

IN THE EVENT AN ORDER IS ISSUED FOR QUANTITIES

OUTSIDE THE RANGES LISTED ABOVE, THE UNIT PRICE

ASSOCIATED WITH THE HIGHEST LISTED RANGE WILL BE

APPLIED TO THAT ORDER.

(End of narrative C001)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-124 MARKINGS SHALL APPLY

UNIT PACK: 001 INTERMEDIATE PACK: 000

LEVEL PRESERVATION: Military

LEVEL PACKING: A

ADDITIONAL PACKAGING REQUIREMENTS

ESTIMATED MAXIMUM UNIT PACKAGE WEIGHT (POUNDS) AND

SIZE (INCHES):

WT [2.5]

LN [6.0]

WD [6.0]

DP [5.5]

MIL-STD-2073-1 CODES, APPENDIX J

JI/A/MP [45] JII/CD [1] JIII/PM [17] JIV/WM [GB]

JV/CD [NA] JVI/CT [B] JVII/UC [KF] JVII/IC [00]

JIX/A/PK [F] JX/SM [17] JVIIIA/OPI [M]

ALL WOOD PACKAGING MATERIAL (WPM) MUST BE ISPM-15

COMPLIANT.

SUPPLEMENTAL INFORMATION:KF=8110-00-222-3017,MS24347-1

REUSABLE CONTAINER WILL BE CONTRACTOR FURNISHED

MATERIAL

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

FOB POINT: Origin

DELIVERIES SHALL COMMENCE 360 DAYS AFTER THE DATE

RECEIPT OF ORDER (DARO).

(End of narrative F001)

8 45

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0004 BEARING, BALL, DUPLEX

NSN: 3110-01-111-5584

Mfr CAGE: 38443

Mfr Part Number: 2-300-059-01

0004AA PRODUCTION QUANTITY ORDERING PERIOD FOUR 32 (E) EA $ 2,763.93000 ________________________________________ ______________

PROGRAM YEAR: 4

COMMODITY NAME: BEARING, BALL, DUPLEX

CLIN CONTRACT TYPE:

Firm Fixed Price

PSC: 3110

IN THE EVENT AN ORDER IS ISSUED FOR QUANTITIES

OUTSIDE THE RANGES LISTED ABOVE, THE UNIT PRICE

ASSOCIATED WITH THE HIGHEST LISTED RANGE WILL BE

APPLIED TO THAT ORDER.

(End of narrative C001)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-124 MARKINGS SHALL APPLY

UNIT PACK: 001 INTERMEDIATE PACK: 000

LEVEL PRESERVATION: Military

LEVEL PACKING: A

ADDITIONAL PACKAGING REQUIREMENTS

ESTIMATED MAXIMUM UNIT PACKAGE WEIGHT (POUNDS) AND

SIZE (INCHES):

WT [2.5]

LN [6.0]

WD [6.0]

DP [5.5]

MIL-STD-2073-1 CODES, APPENDIX J

JI/A/MP [45] JII/CD [1] JIII/PM [17] JIV/WM [GB]

JV/CD [NA] JVI/CT [B] JVII/UC [KF] JVII/IC [00]

JIX/A/PK [F] JX/SM [17] JVIIIA/OPI [M]

ALL WOOD PACKAGING MATERIAL (WPM) MUST BE ISPM-15

COMPLIANT.

SUPPLEMENTAL INFORMATION:KF=8110-00-222-3017,MS24347-1

REUSABLE CONTAINER WILL BE CONTRACTOR FURNISHED

MATERIAL

9 45

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

FOB POINT: Origin

DELIVERIES SHALL COMMENCE 360 DAYS AFTER THE DATE

RECEIPT OF ORDER (DARO).

(End of narrative F001)

0006 CONTRACTS DATA REQUIREMENTS LIST ________________________________

A001 SERIAL NUMBER REPORT REQUIREMENT $ ** NSP ** $ ** NSP ** ________________________________ ______________ __________________

COMMODITY NAME: SNRR/D1-SESS-81759A

CLIN CONTRACT TYPE:

Firm Fixed Price

PSC: 3110

DELIVERY AS REQUIRED PER DD FORM 1423, CONTRACT DATA

REQUIREMENTS LIST (CDRL) AND/OR STATEMENT OF WORK

(SOW).

(End of narrative C001)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

FOB POINT: Destination

10 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION E - INSPECTION AND ACCEPTANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

For FAR clauses: https://www.acquisition.gov/

For DFARS clauses: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

E-1 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE AUG/1996

E-2 52.246-16 RESPONSIBILITY FOR SUPPLIES APR/1984

E-3 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT DEC/2014

(a) The contractor shall comply with the higher-level quality standard(s) listed below.

ANSI/ISO/ASQ 9001:2015, AS 9100 OR EQUIVALENT, TAILORING: ALL PARAGRAPHS UNDER 8.3 (DESIGN AND DEVELOPMENT OF PRODUCTS AND SERVICES) DO

NOT APPLY

(b) The contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts in--

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require--

(i) Control of such things as design, work operations, in-process control, testing and inspection; or

(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

(End of clause)

11 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION F - DELIVERIES OR PERFORMANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

For FAR clauses: https://www.acquisition.gov/

For DFARS clauses: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

F-1 52.211-17 DELIVERY OF EXCESS QUANTITIES SEP/1989

F-2 52.242-15 STOP-WORK ORDER AUG/1989

F-3 52.242-17 GOVERNMENT DELAY OF WORK APR/1984

F-4 52.247-29 F.O.B. ORIGIN FEB/2006

F-5 52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY FEB/2006

F-6 52.247-34 F.O.B. DESTINATION NOV/1991

F-7 52.247-48 F.O.B. DESTINATION--EVIDENCE OF SHIPMENT FEB/1999

F-8 52.247-58 LOADING, BLOCKING, AND BRACING OF FREIGHT CAR SHIPMENTS APR/1984

F-9 52.247-59 F.O.B. ORIGIN--CARLOAD AND TRUCKLOAD SHIPMENTS APR/1984

F-10 52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS JAN/1991

F-11 52.211-8 TIME OF DELIVERY JUN/1997

(a) The Government requires delivery to be made according to the following schedule:

REQUIRED DELIVERY SCHEDULE

ITEM NO. QUANTITY WITHIN DAYS

AFTER DATE OF

CONTRACT

0001AA W/CFAT 30(E) 795 DARO

0001AB W/O CFAT 30(E) 360 DARO

0002AA 32(E) 360 DARO

0003AA 32(E) 360 DARO

0004AA 32(E) 360 DARO

0005AA 32(E) 360 DARO

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFERORS PROPOSED DELIVERY SCHEDULE

ITEM NO. QUANTITY WITHIN DAYS

AFTER DATE OF

CONTRACT

0001AB W/O CFAT 30(E) 360 DARO

0002AA 32(E) 360 DARO

0003AA 32(E) 360 DARO

0004AA 32(E) 360 DARO

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer

12 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the

Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the

Contractors date of receipt of the contract or notice of award by adding

(1) five calendar days for delivery of the award through the ordinary mails, or

(2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term working day excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

(End of Clause)

F-12 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION MAR/2016

(a) Definitions. As used in this clause--

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards

Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html .

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Governments unit acquisition cost" means

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the

Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery.

13 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the

Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459 .

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

__N/A___________ ____N/A___________________________

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

14 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Contract Line, Subline, or

Exhibit Line Item Number Item Description

__N/A__________ ______N/A_________________________

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in

Attachment Number -5-.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in

Attachment Number -6-.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC

International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI

MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International

Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2

Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air

Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer

Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of

15 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of

MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and

Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material

Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Governments unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material

Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

16 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at

252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/ ; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number -7-, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by contract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause)

F-13 52.247-33 F.O.B. ORIGIN, WITH DIFFERENTIALS FEB/2006

(a) The term f.o.b. origin, with differentials, as used in this clause, means --

(1) Free of expense to the Government delivered --

(i) On board the indicated type of conveyance of the carrier (or of the Government, if specified) at a designated point in the city, county, and State from which the shipments will be made and from which line-haul transportation service (as distinguished from switching, local drayage, or other terminal service) will begin;

(ii) To, and placed on, the carriers wharf (at shipside, within reach of the ships loading tackle, when the shipping point is within a port area having water transportation service) or the carriers freight station;

(iii) To a U.S. Postal Service facility; or

(iv) If stated in the solicitation, to any Government-designated point located within the same city or commercial zone as the f.o.b.

origin point specified in the contract (the Federal Motor Carrier Safety Administration prescribes commercial zones at Subpart B of 49

CFR part 372); and

(2) Differentials for mode of transportation, type of vehicle, or place of delivery as indicated in Contractors offer may be added to the contract price.

(b) The Contractor shall --

(1)(i) Pack and mark the shipment to comply with contract specification; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements to protect the goods and to ensure assessment of the lowest applicable transportation charge;

17 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(2)(i) Order specified carrier equipment when requested by the Government; or

(ii) If not specified, order appropriate carrier equipment not in excess of capacity to accommodate shipment;

(3) Deliver the shipment in good order and condition to the carrier, and load, stow, trim, block, and/or brace carload or truckload shipment (when loaded by the Contractor) on or in the carriers conveyance as required by carrier rules and regulations;

(4) Be responsible for any loss of and/or damage to the goods --

(i) Occurring before delivery to the carrier;

(ii) Resulting from improper packing and marking; or

(iii) Resulting from improper loading, stowing, trimming, blocking, and/or bracing of the shipment, if loaded by the Contractor on or in the carriers conveyance;

(5) Complete the Government bill of lading supplied by the ordering agency or, when a Government bill of lading is not supplied, prepare a commercial bill of lading or other transportation receipt. The bill of lading shall show --

(i) A description of the shipment in terms of the governing freight classification or tariff (or Government rate tender) under which lowest freight rates are applicable;

(ii) The seals affixed to the conveyance with their serial numbers or other identification;

(iii) Lengths and capacities of cars or trucks ordered and furnished;

(iv) Other pertinent information required to effect prompt delivery to the consignee, including name, delivery address, postal address and ZIP code of consignee, routing, etc.;

(v) Special instructions or annotations requested by the ordering agency for commercial bills of lading; e.g., This shipment is the property of, and the freight charges paid to the carrier(s) will be reimbursed by, the Government; and

(vi) The signature of the carriers agent and the date the shipment is received by the carrier; and

(6) Distribute the copies of the bill of lading, or other transportation receipts, as directed by the ordering agency.

(c)(1) It may be advantageous to the offeror to submit f.o.b. origin prices that include only the lowest cost to the Contractor for loading of shipment at the Contractors plant or most favorable shipping point. The cost beyond that plant or point of bringing the supplies to the place of delivery and the cost of loading, blocking, and bracing on the type vehicle specified by the Government at the time of shipment may exceed the offerors lowest cost when the offeror ships for the offerors account. Accordingly, the offeror may indicate differentials that may be added to the offered price. These differentials shall be expressed as a rate in cents for each 100 pounds (CWT) of the supplies for one or more of the options under this clause that the Government may specify at the time of shipment.

(2) These differential(s) will be considered in the evaluation of offers to determine the lowest overall cost to the Government. If, at the time of shipment, the Government specifies a mode of transportation, type of vehicle, or place of delivery for which the offeror has set forth a differential, the Contractor shall include the total of such differential costs (the applicable differential multiplied by the actual weight) as a separate reimbursable item on the Contractors invoice for the supplies.

(3) The Government shall have the option of performing or arranging at its own expense any transportation from Contractors shipping plant or point to carriers facility at the time of shipment and, whenever this option is exercised, the Government shall make no reimbursement based on a quoted differential.

(4) Offerors differentials in cents for each 100 pounds for optional mode of transportation, types of vehicle, transportation within a mode, or place of delivery, specified by the Government at the time of shipment and not included in the f.o.b. origin price indicated in the Schedule by the offeror, are as follows:

_______ (carload, truckload, less-load, _______ wharf, flatcar, driveaway, etc.)

(End of Clause)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

1. The Governments Quality Assurance Representative (QAR) will inspect supplies described by manufacturer's name/code and part number at origin location(s):

18 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

a. The QAR may require that objective evidence be furnished establishing the name and address of the plant that manufactures the supplies to ensure that a domestic product is being supplied.

b. Objective evidence of performance must be present for all quality assurance requirements specified in the contract. The QAR may require additional examinations and tests to determine:

i. Completeness of item

ii. Material is new and unused

iii. Absence of rust

iv. Contamination, or deterioration

v. Correct identification/item marking

vi. Correct packaging

vii. Absence of any damage

viii. Compliance with preparation for delivery

2. If the supplier is not the manufacturer of the supplies, objective evidence must be furnished to establish that the supplies were produced by the approved manufacturer.

3. For supplies designated as former Government surplus (whether described by manufacturers name/code and part number, or by Military or

Federal specification or drawing), the original package markings of each item shall be verified to previous Government contract number and part number. Any deviation shall be cause for rejection of the item. The Procuring Activity may add additional inspection requirements based on the evaluation of the surplus offer. Such additional requirements will be identified before the award.

(End of TQ Requirement)

F-16 52.211-9020 TIME OF DELIVERY ACCELERATED (JUN 2008)

Unless otherwise authorized in the award, accelerated delivery is acceptable only if there is no additional cost or obligation to the

Government for accelerated delivery.

*** END OF NARRATIVE F0001 ***

19 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION G - CONTRACT ADMINISTRATION DATA

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

G-1 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS DEC/2018

(a) Definitions. As used in this clause--

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and

Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and

Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov ; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the

WAWF home page at https://wawf.eb.mil/ .

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer

Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items--

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

THE CONTRACTOR IS ENCOURAGING TO USE THE COMBINATION INVOICE AND RECEIVING REPORT (COMBO) FOR SUBMITTING INVOICES FOR SUPPLIES. THIS

ELIMINATES THE NEED TO SEPERATELY PROCESS A RECEIVING REPORT AND INVOICE.

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some Combinations of invoice and receiving report in one step.]

20 45

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC HQ0337

Issue By DoDAAC SPRRA1

Admin DoDAAC S3306A

Inspect By DoDAAC S3306A

Ship To Code SEE DELIVER ORDER

Ship From Code 38443

Mark For Code TBD

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment…