SPI.pdf
PDF 2 MB Posted
- Attached to
- F-16 Wing Flap Federal contract opportunity
- Solicitation number
- SPRHA4-22-R-0223
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains packaging and preservation requirements for an F-16 wing flap part, as well as details on an associated federal contract opportunity on the Defense Logistics Agency Aviation website. The packaging document specifies that critical surfaces must be treated with preservative and covered with barrier wrap and tape. It also provides requirements for wood packaging material to prevent the spread of invasive species, requiring debarked wood treated with heat. The solicitation is for an F-16 wing flap part open only to approved sources Cyclone Aviation Services, Aerospace & Commercial Technologies, and Lockheed Martin. Interested parties can become approved sources by reviewing the attached manufacturing qualification requirements document. The opportunity is posted by Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA422R0223_______0004.pdf | ||
| 6FATR_1769.pdf | ||
| Pkg_SOW_1769.pdf | ||
| SPRHA422R0223_______0003.pdf | ||
| 5FATR_1768.pdf | ||
| MQR.pdf | ||
| 2EDL_1769.pdf | ||
| 4EDR_1769.pdf | ||
| 3EDR_1768.pdf | ||
| EDL_1768.pdf | ||
| SPRHA422R0223_______0002.pdf | ||
| SPRHA422R0223_______0001.pdf | ||
| FATR.pdf | ||
| EDL.pdf | ||
| MQR.pdf | ||
| SPI.pdf | ||
| SPRHA422R0223.pdf | ||
| EDR.pdf |
Show all 18
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 26 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CUI
CUI Controlled by: DLA Aviation Ogden Controlled By: AUBA
CUI Category: Controlled Tech info Distribution/ Dissemination Control: FEDCON
POC: michelle.mihu@us.af.mil
CUI
CAUTION NOTICES
NOTES
1. APPLY MIL-PRF-16173, CODE 02 PRESERVATIVE TO CRITICAL SURFACES, MIL-PRF-46170 INTERNALLY AND
MIL-PRF-23827, CODE 11, TO BUSHINGS AND BEARINGS. COVER TREATED AREAS WITH BARRIER WRAP REF.-15 AND
SECURE WITH TAPE, REF.-17 THEN WRAP ITEM IN REF.-16 AND SECURE WITH REF.-17.
2. SECURE REF.-1 AND REF.-2 TO LID, AND REF.-12 TO REF.-7, USING NAILS OR STAPLES CONFORMING TO ASTM F1667.
2. LINE REF.-12, -18 AND -19 WITH FELT CUSHIONING, REF.-13, TO PREVENT DIRECT CONTACT BETWEEN ITEM AND
WOOD. USE ADDITIONAL FELT CUSHIONING IF NEEDED TO ENSURE A SNUG FIT. ADHERE USING ADHESIVE CONFORMING
TO A-A-1936 TYPE II OR EQUAL.
3. USE NAILS OR STAPLES IAW ASTM F1667 ON REF.-18 AND -19 TO REACH REQUIRED THICKNESS.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .