4EDR_1769.pdf
PDF 1 MB Posted
- Attached to
- F-16 Wing Flap Federal contract opportunity
- Solicitation number
- SPRHA4-22-R-0223
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of a wing-leading edge maneuver assembly flap. Key details include: the part number is 16W022-889 with national stock number 1560-01-506-1769WF; specifications and standards to be used in lieu of existing data such as SAE-AMS-QQ-A-250/4 in place of QQ-A-250/4; requirements for Item Unique Identification marking including human readable and machine readable matrix labeling with minimum sizes, content, and specifications; materials to be used per alternate specifications; reference to alternate IGES data in lieu of existing drawings. The related federal contract opportunity is solicitation SPRHA4-22-R-0223 for F-16 wing flaps open to approved sources only including Cyclone Aviation Svcs, Aerospace & Commercial Techs, and Lockheed Martin with interested parties to review manufacturing qualification requirements in the attachments. The agency is Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA422R0223_______0004.pdf | ||
| 6FATR_1769.pdf | ||
| SPI.pdf | ||
| Pkg_SOW_1769.pdf | ||
| MQR.pdf | ||
| 2EDL_1769.pdf | ||
| 3EDR_1768.pdf | ||
| EDL_1768.pdf | ||
| SPRHA422R0223_______0003.pdf | ||
| 5FATR_1768.pdf | ||
| SPRHA422R0223_______0002.pdf | ||
| SPRHA422R0223_______0001.pdf | ||
| MQR.pdf | ||
| SPI.pdf | ||
| SPRHA422R0223.pdf | ||
| FATR.pdf | ||
| EDL.pdf | ||
| EDR.pdf |
Show all 18
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
FLAP, WING-LEADING EDGE MANEUVER ASSEMBLY
2. PART NUMBER:
16W022-889
3. NATIONAL STOCK NUMBER:
1560-01-506-1769WF
PREPARED BY:
DON WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
20210302
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY
SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
7. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY
DELETE EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
8. 16PR100 NOT REQUIRED FOR MANUFACTURE.
9. MATERIAL PER SAE-AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4.
10. MATERIAL PER SAE-AMS-QQ-A-250/11 IN LIEU OF QQ-A-250/11.
11. REFER TO IGES DATA 16W043-137, 16W043-138, 16W329-8, 16W370-9, AND 16W391-8 IN LIEU OF 16PR006.
12. MATERIAL PER SAE-AMS-QQ-A-250/6 IN LIEU OF QQ-A-250/6.
CUI
CUI Controlled by: DLA Aviation Ogden Controlled By: AUBA
CUI Category: Controlled Tech info Distribution/ Dissemination Control: FEDCON
POC: michelle.mihu@us.af.mil
File details come from the government source that posted it. Updated .