SPI_F013664996.pdf

96 LBSITEM WT.

2169 MODMARCH 87DD

FORM

REQDP/N

QTY

SIZE:

(INCHES UNLESS SPECIFIED)

TOLERANCES ON FRAC. ± 1

8, DECIMAL ± .10, ANGLES ± 1°

DESCRIPTION

NOMENCLATURE OR

LEVEL B:

LEVEL A:

CLOSURE

IAW: ASTM-D1974

IAW: ASTM-D6251

COMPUTER GENERATED

SPECIFICATION

MATERIAL

SPI NO. F01-366-4996

CODE ID

98747

DESIGN FRAGILITY G

SPEC STYLE TYPE CL VRTY GR TR

AS SPECIFIED BELOW AND BILL OF MATERIALS

ILL. NATIONAL STOCK NO.PART OR DRAWING NO. CURRENT

SPECIAL MARKINGS:

A) SPI NO. F01-366-4996

PRESERVATIVE: MIL-PRF-81322 CODE 12

UNSERVICEABLE METHOD: 20

CLEANING & DRYING: IAW MIL-STD-2073

MILITARY PRESERVATION IAW MIL-STD-2073

B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

MARKING IAW MIL-STD-129

001QUP

ICQ 000

CNTR O.D.

LEVEL B:

ITEM DIM

LEVEL A:

CNTR I.D.

LEVEL B:

LEVEL A:

GROSS WT LBS

ITEM NOMENCLATURE

PACKING

LEVEL

GROSS CU FT

B

A

ASTM-D5118

ASTM-D6251

REV

DATE

ORIGINAL CHK.

AUTH.

P.S.

SPECIAL PACKAGING INSTRUCTION

22 3/8

24 5/8

21 1/2

24 5/8

22 3/8

21 1/2

15 1/2

13 1/4

11 3/8

LENGTH WIDTH DEPTH

21 3/4

22 5/822 5/8

21 3/4

13 1/2

LEVEL A LEVEL B

5.439

A III

3.839

SPI NO. (TPO)

SHEET 1 OF 3

A/R

A/R

A/R

TAPE, FILAMENT

TAPE, PACKAGING

TAPE, MASKING

WRAP

PADS, TOP & BOTTOM

CONTAINER, SHIPPING

1 X AS REQUIRED

3 X AS REQUIRED

1 X AS REQUIRED

66 X 36

21 1/2 X 21 1/2 X 1/8

21 3/4 X 21 3/4 X 12 (ID)

ASTM-D5330 TYPE I

ASTM-D5486 TYPE I OR V

ASTM-D6123 TYPE I OR II

A-A-3174 TYPE I, CL. 1, GR. A, FIN. 1

ASTM-D4727 CF, DOM, SW, GR. 200

ASTM-D5118 RSC, DW, V11c

-6

-5

-4

-3

-2

-1

K. KNIGHTON

G. HOENIKE

D. THIEL

G. HOENIKE

1630-01-366-49969235536-170

WHEEL ASSEMBLY, AIRCRAFT

F01-366-4996

B

V11cRSC

10123

REVISIONS

DESCRIPTIONLTR DATE

DW

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

SERVICEABLE METHOD: 20

DD 2169C MODMARCH 87

FORM

COMPUTER GENERATED

CAUTION NOTICES

NOTICE 1: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.

NOTICE 2: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES

EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 3: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.

NOTICE 4: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 2 OF 3

ITEM NOMENCLATURE

98747

CODE ID

NOTES

1. APPLY PRESERVATIVE, CODE 12, TO BUSHING AND BEARING SURFACES.

2. PLACE ONE EACH PAD, REF.-2, IN BOTTOM OF CONTAINER, REF.-1. FULLY ENCAPSULATE WHEEL IN WRAP, REF.-3, AND SECURE WITH TAPE, REF.-4. PLACE WRAPPED WHEEL IN CONTAINER AND PLACE REMAINING PAD, REF.-2, ON TOP.

3. USE ADDITIONAL PADS, REF.-2, IF NECESSARY, TO ENSURE A SNUG FIT.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM

NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

WHEEL ASSEMBLY, AIRCRAFT

F01-366-4996

DD 2169C MODMARCH 87

FORM

COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 3 OF 3

ITEM NOMENCLATURE

98747

CODE ID

WHEEL ASSEMBLY, AIRCRAFT

F01-366-4996

-1

-2

-2

-3

-4

-5

-6

ITEM REFERENCE