AK15810439 PRON EH4L0171EH.pdf
PDF 104 KB Posted
- Attached to
- Pump Assembly, Power Federal contract opportunity
- Solicitation number
- SPRDL1-24-Q-0104
About this file
This document is a Special Packaging Instruction (SPI) for a Steering Pump (NSN 2530-01-581-0439). It provides detailed requirements for cleaning, preserving, packing, and marking the item, referencing applicable military standards and specifications. The related federal contract opportunity is a Solicitation for a Firm-Fixed Price, 5-Year Long Term Contract (LTC) to procure Pump Assemblies, Power (NSN 2530-01-581-0439). The contract will be a Small Business Set-Aside, with a minimum quantity of 3 and a maximum of 69. The approved sources/manufacturers are Danfoss Power Solutions II LLC and Oshkosh Defense LLC. Packaging must comply with the requirements outlined in the SPI document. Contractors are instructed to email quotations to the Contract Specialist.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL124Q0104-0003 Solicitation Amendment.pdf | ||
| SPRDL124Q0104 Solicitation Amendment 0002 ver1.pdf | ||
| SPRDL124Q0104-0001 Solicitation Amendment.pdf | ||
| SPRDL124Q0104 Solicitation.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BK
SW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3832630 (45152) STEERING PUMP 19207 AK15810439
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2530-01-581-0439 10-15-2010
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 150.0 9.458 34.0 X 19.0 X 25.3
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 43
13. CLEANING 1-C A/R PRESERVATIVE: MIL-PRF-16173, GRADE 4
MIL-STD-2073-1D & NOTE B 2-D A/R CAPS/PLUGS: NAS-847
14. DRYING 3-E 8 BLOCKING AND BRACING: ASTM-D6199
MIL-STD-2073-1D & NOTE B 4-F 2 BARRIER: MIL-PRF-121, TYPE II, SIZE: 2 X 3
15. PACKING
5-G 1 CUSHIONING: A-A59135, CLASS 1, GRADE A
a. LEVEL A SIZE: 18 X 120 X 1/4
MIL-STD-2073-1D & NOTE J 6-H 1 ENVELOPE: MIL-DTL-6060E, SIZE: 48 X 48
b. LEVEL B 7-I 1 CONTAINER: ASTM-D6880, CLASS 2, STYLE 7
NOT APPLICABLE SIZE: 31 X 17-1/2 X 19-1/2
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. PRESERVATION AND PACKING SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD-2073-1D AND ANY
APPLICABLE CONTAINER SPECIFICATIONS.
B. CLEAN AND DRY ITEMS BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.
C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED EXTERNAL METALLIC SURFACES.
D. SEAL ALL FITTINGS AND OPENINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING
TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE PAGES 2 AND 3.
F. COVER BLOCKING BUILD-UP (NOTE E) WITH PAPER AT MOUNTING LOCATOINS, PUNCH HOLES THROUGH
PAPER USING BLOCKING BUILD-UP AS A TEMPLATE.
G. DOUBLE WRAP PUMP WITH CUSHIONING, SECURE WITH TAPE ASTM-6123.
H. ENVELOPE FABRICATION SHALL BE IAW SPECIFICATION MIL-DTL-6060. MATERIAL USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F 104. GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BARRIER AT THE MOUNTING LOCATION USING MMM-A-260 ADHESIVE OR COMMERCIAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A SUFFICIENT QUANTITY OF
ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE AIRTIGHT SEAL.
I. CONTAINER CLOSURE SHALL BE IN ACCORDANCE WITH THE APPLICABLE CONTAINER SPECIFICATION.
(ASTM-6880)
J. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -BK OMB No. 0704-0188 SW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3832630 (45152) STEERING PUMP 19207 AK15810439
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2530-01-581-0439 10-15-2010
DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages
PART MOUNTING LOCATIONS
ITEM A
ITEM B
ITEM C
ITEM E
ITEM D
ITEM F
MOUNTED PART
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -BK OMB No. 0704-0188 SW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3832630 (45152) STEERING PUMP 19207 AK15810439
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2530-01-581-0439 10-15-2010
BILL OF MATERIAL
ITEM SIZE QTY ADDITIONAL NOTES REFERENCE
A 2 X 3 BARRIER 2 MIL-PRF-121 SEE PAGE 2
B 2 X 4 X 11 4 ASTM-D6199 SEE PAGE 2 AND BELOW
C 2 X 4 X 4 4 ASTM-D6199 SEE PAGE 2 AND BELOW
D 48 X 48 ENVELOPE 1 MIL-PRF-131 MATERIAL SEE PAGE 2 AND BELOW
E 12 X 12 GASKET 2 IAW MIL-DTL-6060E SEE PAGE 2
F 1/2 X 6 HARDWARE SET 2
HARDWARE SET CONSISTS OF:
1 PC 1/2 X 6 CARRIAGE BOLT, 1PC 1/2
LOCK WASHER, 1PC 1/2 FLAT
WASHER, 1 PC 3/4 FLAT WASHER,
AND 1PC 1/2 NUT
SEE PAGE 2
18 X 120 X 1/4 CUSHIONING 1 A-A59135, CLASS 1, GRADE A NOT PICTURED
DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages
ITEM D (HOLE LOCATIONS)
CRATE BASE (HOLE LOCATIONS)
BLOCKING BUILD UP (HOLE LOCATIONS)
ALL HOLES DISPLAYED ON
PAGE ARE 1/2” DIAMETER.
ITEM C
ITEM B
File details come from the government source that posted it. Updated .