SPI.pdf

PDF 260 KB Posted Mar 28, 2018

Attached to: Arm Assembly, Pivot Federal contract opportunity
Solicitation number: SPRDL1-18-R-0154
Issued by: Department of the Army Materiel Command TACOM Life Cycle Management Command

About this file

From the source

Special Packaging Instructions (SPI)

View the file

Other files for this federal contract opportunity

Other files attached to Arm Assembly, Pivot, newest first.
File	Type	Posted
SPRDL1-18-R-0154-0002.pdf	PDF	Apr 10, 2018
SPRDL1-18-R-0154_FBO_Solicitation.pdf	PDF	Mar 28, 2018

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 10 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 330.0 14.421 40.0 X 35.0 X 17.8

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 43 SEE NOTES

13. CLEANING

MIL-STD-2073-1D

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE O

b. LEVEL B

MIL-STD-2073-1D AND NOTE O

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE

ACCOMPANYING PAGES.

B. APPLY OIL, ITEM 1, TO ALL BARE FERROUS SURFACES. IF PART HAS ALREADY BEEN PRESERVED THEN

THIS STEP MAY BE ELIMINATED.

C. WRAP ENTIRE ARM ASSEMBLY WITH WRAP, ITEM 3, AND SECURE WITH TAPE.

D. WRAP SMALLER SPINDLE WITH CUSHIONING, ITEM 2A, AND LARGER SPINDLE WITH CUSHIONING, ITEM

2B. SECURE WITH TAPE.

E. PREPARE BASE OF CONTAINER, ITEM 18, AS ILLUSTRATED ON PAGE 3.

F. PREPARE CORRUGATED PADS, ITEM 4, AS ILLUSTRATED ON PAGE 4, AND BARRIER MATERIAL, ITEM 5A, AS ILLUSTRATED ON PAGE 6 AND 7.

G. PREPARE LOAD SPREADER, ITEM 8, AS ILLUSTRATED ON PAGE 7. WOOD BLOCKING, ITEM 10, SHALL BE SECURED TO LOAD SPREADER USING ADHESIVE, ITEM 7 OR NAILS. SEE PAGE 7 FOR POSITIONING.

H. ADHERE GASKETS, ITEM 6, TO BOTH SIDES OF BARRIER ENVELOPE, ITEM 5A, AT MOUNTING HOLE

LOCATIONS USING ADHESIVE, ITEM 7.

I. PLACE CORRUGATED PAD, ITEM 4, ON BASE OF CONTAINER, ITEM 18. PLACE BARRIER ENVELOPE, ITEM 5A, OVER ITEM 4. PLACE REMAINING CORRUGATED PAD, ITEM 4, OVER BARRIER ENVELOPE, ITEM 5A.

PLACE PREPARED LOAD SPREADER, ITEM 8, OVER CORRUGATED PAD, ITEM 4. REFER TO PAGE 8 FOR

ASSEMBLY DIAGRAM.

J. SECURE WOOD BLOCKING, ITEM 9, TO PREPARED CONTAINER BASE WITH HARDWARE, ITEMS 12, 13, 14, 15, 16, AND 17. SEE PAGE 8 FOR POSITIONING OF HARDWARE.

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

K. PLACE PREPARED ARM ASSEMBLY, P/N: 12489450 IN THE PREPARED CONTAINER AS SHOWN ON PAGE 8.

L. PLACE WOOD BLOCKING, ITEM 11, OVER ARM ASSEMBLY AND SECURE TO BASE AS SHOWN ON PAGE 8.

M. COVER PREPARED PART WITH CUSHIONING, ITEM 2C, SO AS TO PREVENT HARDWARE FROM

PUNCTURING BARRIER ENVELOPE WHEN IT IS SEALED.

N. COMPLETE BARRIER ENVELOPE, ITEM 5, BY HEAT SEALING 5A TO 5B. SEE PAGE 7 FOR ILLUSTRATION

ON HOW TO HEAT SEAL BARRIER ENVELOPE.

O. THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL A AND LEVEL B SHIPPING CONTAINER.

P. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 10 Pages

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 10 Pages

4-1/2

15-3/8

23-1/8 25-1/4

35-1/4

13-1/8 14-7/8

23-5/8

23-1/8

1/2 DIA. THRU (8 PLACES)

1-1/2 DIA. X 3/4 DEEP COUNTERBORE

(4 PLACES, BOTTOM OF SKIDS)

BASE OF CONTAINER,

ITEM 18

20-3/4

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 10 Pages

1/2 DIA. THRU (8 PLACES)

2-1/2 13-3/8

21-1/8

23-1/4 33-1/4

10-5/8 10-1/8

18-7/8

20-5/8

32-1/2

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 10 Pages

1-3/4

2-1/4 10-1/2

1-1/2

1-3/4

33-1/4

34-3/4

1/2 DIA. THRU (2 PLACES)

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 10 Pages

3-1/4

13-1/4 15-3/8

21-1/2 23-1/8

12-1/2

14-7/8

20-3/4

22-1/2

1/2 DIA. THRU (8 PLACES)

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 7 of 10 Pages

14-1/2 12-7/8

20-5/8 22-3/4

32-3/4

1/2 DIA. THRU (8 PLACES)

12-3/4

2-1/4 44-1/4

9-7/8 12-1/4

5-1/4

37 37

BARRIER ENVELOPE MATERIAL AND ASSEMBLY

36 36

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 8 of 10 Pages

(4 PLACES)

9 (4 PLACES)

P/N: 12489450

(8 PLACES)

CONTAINER BASE

(12 PLACES)

(2 PLACES)

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 9 of 10 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

BILL OF MATERIALS

ITEM

NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.

1 OIL MIL-PRF-2104, GRADE 30. A/R

2 CUSHIONING A-A-59135, CLASS 1, GRADE A.

2A 22 X 18 X 1/4 1 2B 25 X 21 X 1/4 1 2C 36 X 18 X 1/4 1

3 INTIMATE WRAP 75 X 36 MIL-PRF-121, TYPE 1. 1

4 CORRUGATED PAD SEE PAGE 4 ASTM-D4727, TYPE CF, CLASS WR,

VARIETY SW, GRADE W5c.

5 BARRIER ENVELOPE MIL-E-6060.

5A 92 X 36

(SEE PAGE 6)

5B 110 X 18 1

6 GASKET 3 X 3 X 1/8 ASTM-F104. 16

7 ADHESIVE MMM-A-260. A/R

8 LOAD SPREADER 35 X 15 X 1/4

(SEE PAGE 7)

A-A-55057, TYPE A. 1

9 WOOD BLOCKING 4 X 4 (NOM) X 13

(SEE PAGE 5)

ASTM-D6199, CLASS 2,

GROUP II OR III.

10 WOOD BLOCKING 2 X 4 (NOM) X 5 ASTM-D6199, CLASS 2,

GROUP II OR III.

11 WOOD BLOCKING 2 X 4 (NOM) X 34-3/4

(SEE PAGE 5)

ASTM-D6199, CLASS 2,

GROUP II OR III.

12** THREADED ROD 1/2 X 16 COMMERCIAL GRADE. 2

13** CARRIAGE BOLT 1/2 X 11 COMMERCIAL GRADE. 2

14** CARRIAGE BOLT 1/2 X 7 COMMERCIAL GRADE. 4

15** FLAT WASHER 1/2 COMMERCIAL GRADE. 12

16** LOCK WASHER 1/2 COMMERCIAL GRADE. 12

17** HEX NUT 1/2 COMMERCIAL GRADE. 12

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 10 of 10 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12489450 (19207) ARM ASSEMBLY, PIVOT 19207 AK15339159

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2530-01-533-9159 9-22-2006 A

BILL OF MATERIALS

ITEM

NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.

*18 CONTAINER 37 X 33-1/2 X 12 PPP-B-621, CLASS 2, STYLE 2,

GRADE B, MODIFIED.

*CONTAINER SHALL CONFORM TO PPP-B-621, CLASS 2, STYLE 2, GRADE B, WITH THE EXCEPTION THAT THE SKIDS SHALL BE 3 INCHES FROM THE EDGE OF THE CONTAINER, AND THE BASE SHALL BE 2 INCH

(NOM) LUMBER.

**NOTE: COMMERCIAL QUALITY STEEL IS ACCEPTABLE WITH ZINC PLATING OR PRESERVATIVE COATING

CONFORMING TO MIL-PRF-16173, GRADE 4.

File details come from the government source that posted it.