A19_SPRBL1-17-R-0010.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEM

Offeror To Complete Block 12, 17, 23, 24, & 30

1. Requisition Number Page Of

2. Contract No. 3. Award/Effective Date 4. Order Number 5. Solicitation Number 6. Solicitation Issue Date

7. For Solicitation Information Call:

A. Name B. Telephone Number (No Collect Calls) 8. Offer Due Date/Local Time

9. Issued By Code 10. This Acquisition is Unrestricted OR Set Aside: % For:

Small Business Women-Owned Small Business (WOSB) Eligible Under the Women-Owned Small Business Program

Hubzone Small Business EDWOSB

Service-Disabled Veteran-Owned Small Business NAICS:

Email: 8(A) Size Standard:

11. Delivery For FOB Destination Unless Block Is Marked

12. Discount Terms 13a. This Contract Is A Rated Order Under DPAS (15 CFR 700) 13b. Rating

See Schedule 14. Method Of Solicitation RFQ IFB RFP

15. Deliver To Code 16. Administered By Code

Telephone No.

17a. Contractor/Offeror Code Facility 18a. Payment Will Be Made By Code

Telephone No.

17b. Check If Remittance Is Different And Put Such

Address In Offer 18b. Submit Invoices To Address Shown In Block 18a Unless Block Below Is Checked

See Addendum 19.

Item No.

20.

Schedule Of Supplies/Services 21.

Quantity 22.

Unit 23.

Unit Price 24.

Amount

(Use Reverse and/or Attach Additional Sheets As Necessary)

25. Accounting And Appropriation Data 26. Total Award Amount (For Govt. Use Only)

27a.Solicitation Incorporates By Reference FAR 52.212-1, 52.212-4. FAR 52.212-3 And 52.212-5 Are Attached. Addenda Are Are Not Attached.

27b.Contract/Purchase Order Incorporates By Reference FAR 52.212-4. FAR 52.212-5 Is Attached. Addenda Are Are Not Attached.

28. Contractor Is Required To Sign This Document And Return _________ 29. Award Of Contract: Ref. Offer Copies to Issuing Office. Contractor Agrees To Furnish And Deliver All Items Set Forth Or Otherwise Identified Above And On Any Additional Sheets Subject To The Terms And Conditions Specified.

Dated . Your Offer On Solicitation (Block 5), Including Any Additions Or Changes Which Are Set Forth Herein, Is Accepted As To Items:

30a. Signature Of Offeror/Contractor 31a. United States Of America (Signature Of Contracting Officer)

30b. Name And Title Of Signer (Type Or Print) 30c. Date Signed 31b. Name Of Contracting Officer (Type Or Print) 31c. Date Signed

Authorized For Local Reproduction Previous Edition Is Not Usable

Standard Form 1449 (Rev. 2/2012) Prescribed By GSA-FAR (48 CFR) 53.212

SPRBL1-17-R-0010

MARK A. LASKOSKI (443)861-4545

MARK.A.LASKOSKI.CIV@MAIL.MIL

SPRBL1

DLA LAND AT ABERDEEN

6001 COMBAT DRIVE ROOM C1-301

APG, MD 21005-1846

334310

X DOA7

X

SEE SCHEDULE

SEE SCHEDULE

X X

X 1

1 54

HALL.CHERYL.JEANINE.1383385985 Digitally signed by HALL.CHERYL.JEANINE.1383385985 Date: 2017.02.09 15:40:54 -05'00'

19.

Item No.

20.

Schedule Of Supplies/Services

21.

Quantity

22.

Unit

23.

Unit Price

24.

Amount

32a. Quantity In Column 21 Has Been

Received Inspected Accepted, And Conforms To The Contract, Except As Noted: _________________________________________________

32b. Signature Of Authorized Government Representative 32c. Date 32d. Printed Name and Title of Authorized Government Representative

32e. Mailing Address of Authorized Government Representative 32f. Telephone Number of Authorized Government Representative

32g. E-Mail of Authorized Government Representative

33. Ship Number 34. Voucher Number 35. Amount Verified 36. Payment 37. Check Number Correct For Partial Final Complete Partial Final

38. S/R Account No. 39. S/R Voucher Number 40. Paid By

41a. I Certify This Account Is Correct And Proper For Payment 42a. Received By (Print) 41b. Signature And Title Of Certifying Officer 41c. Date 42b. Received At (Location)

42c. Date Rec’d (YY/MM/DD) 42d. Total Containers

Standard Form 1449 (Rev. 2/2012) Back

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: MARK A. LASKOSKI

Buyer Office Symbol/Telephone Number: DLA-ZLAA/(443)861-4545

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

A. ITEMS FOR PROCUREMENT: This Request For Proposal (RFP) is for the procurement of the Bose TriPort Tactical Headset Series 2 (TTHS2), part number 326535 and NSN 5965-01-612-5328.

B. TECHNICAL DATA PACKAGE (TDP): The Government does not own and cannot provide the TDP for the TTHS2.

C. CONTRACT TYPE: This RFP will result in a Firm Fixed Price (FFP), Indefinite-Delivery Indefinite-Quantity (IDIQ), Long-Term Contract

(LTC) to be issued using FAR Part 12, Commercial Item Acquisition Procedures.

D. PERIOD OF PERFORMANCE: The period of performance will consist of one five-year base period and no option periods.

E. UNIT PRICES: Proposed unit prices will be for the item(s) specified in the Supplies or Services and Price/Costs section of this solicitation, for a period of five (5) years from the contract effective date. All orders placed during this time period shall be issued as priced delivery orders. Offerors shall insert Firm-Fixed prices for each year of the contract in the Supplies or Services and

Prices/Costs section where indicated. Pricing shall include FOB Destination, packaging, and labeling.

F. BEST ESTIMATED QUANTITY (BEQ): The Government's annual BEQ for NSN 5965-01-612-5328 is provided below for each ordering year of the contract for planning purposes only. The BEQ does not represent a guarantee by the Government.

Year One - 2,700 each

Year Two - 2,700 each

Year Three - 2,700 each

Year Four - 2,700 each

Year Five - 2,700 each

G. MINIMUM GUARANTEE/CONTRACT MAXIMUM: A guarantee of $25,000.00 will be provided for the first year only, with no guarantee provided for the remaining years. The resultant contract will have a total monetary ordering maximum of $25,000,000.00.

H. DELIVERY: The expected ship to location for the duration of the resulting contract will be San Joaquin, CA (W62G2T). This requirement will be issued as FOB Destination with Inspection and Acceptance at origin. The Government required delivery schedule is located in the

Deliveries or Performance section. Accelerated delivery at no additional cost to the Government is accepted and encouraged.

I. ECONOMIC PURCHASE QUANTITY-SUPPLIES: Offerors are encouraged to complete FAR clause 52.207-4 if they believe that different range quantities than what is listed in the Supplies/Services section would be more advantageous to the Government.

J. COMMERCIAL WARRANTY: An implied warranty of merchantability and fitness is contained in FAR 52.212-4 of this solicitation.

K. DATA OTHER THAN CERTIFIED COST AND PRICING DATA: In accordance with DLAD 15.403-3(b)(1)(ii), if the Contracting Officer has no other means of determining price reasonableness then they may require data other than certified cost and pricing data to aid in their determination. DLAD 15.403-3(b)(1)(iii) goes on to state that the Contracting Officer may request: prior sales; catalog pricing and discounts; cost data such as hours by labor category, direct and indirect rates, or possibly full cost data where absolutely necessary.

L. POINT OF CONTACT: All inquiries shall be directed to the point of contact in block(7) on page(1) of this solicitation.

*** END OF NARRATIVE A0001 ***

2 54

SPRBL1-17-R-0010

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SUPPLIES OR SERVICES AND PRICES/COSTS

0001 ORDERING YEAR ONE $ _________________ __________________

See Range Pricing

NSN: 5965-01-612-5328

COMMODITY NAME: BOSE TRIPORT TACTICAL HEADSET

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 32108

Mfr Part Number: 326535

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 1500 $

1501 3000 $

3001 4500 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE TECHNICAL REQUIREMENTS

LOCATION OF PACKAGING/PACKING/SPECS:

ADDENDA: J

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(W62G2T) XU W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY,CA,95304-5000

1001 ORDERING YEAR TWO $ _________________ __________________

See Range Pricing

NSN: 5965-01-612-5328

COMMODITY NAME: BOSE TRIPORT TACTICAL HEADSET

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 32108

Mfr Part Number: 326535

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

3 54

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

1 1500 $

1501 3000 $

3001 4500 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE TECHNICAL REQUIREMENTS

LOCATION OF PACKAGING/PACKING/SPECS:

ADDENDA: J

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(W62G2T) XU W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY,CA,95304-5000

2001 ORDERING YEAR THREE $ ___________________ __________________

See Range Pricing

NSN: 5965-01-612-5328

COMMODITY NAME: BOSE TRIPORT TACTICAL HEADSET

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 32108

Mfr Part Number: 326535

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 1500 $

1501 3000 $

3001 4500 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE TECHNICAL REQUIREMENTS

LOCATION OF PACKAGING/PACKING/SPECS:

ADDENDA: J

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

4 54

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(W62G2T) XU W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY,CA,95304-5000

3001 ORDERING YEAR FOUR $ __________________ __________________

See Range Pricing

NSN: 5965-01-612-5328

COMMODITY NAME: BOSE TRIPORT TACTICAL HEADSET

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 32108

Mfr Part Number: 326535

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 1500 $

1501 3000 $

3001 4500 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE TECHNICAL REQUIREMENTS

LOCATION OF PACKAGING/PACKING/SPECS:

ADDENDA: J

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(W62G2T) XU W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY,CA,95304-5000

4001 ORDERING YEAR FIVE $ __________________ __________________

See Range Pricing

NSN: 5965-01-612-5328

5 54

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

COMMODITY NAME: BOSE TRIPORT TACTICAL HEADSET

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 32108

Mfr Part Number: 326535

Range Quantities ________________

FROM TO UNIT PRICE ____ __ __________

1 1500 $

1501 3000 $

3001 4500 $

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE TECHNICAL REQUIREMENTS

LOCATION OF PACKAGING/PACKING/SPECS:

ADDENDA: J

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Destination

SHIP TO:

(W62G2T) XU W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY,CA,95304-5000

5001 Basic CLIN for ELIN ___________________

The below ELIN is associated with the Data Item Numbers on the Contract Data Requirements List (CDRL) DD Form

1423, in section J.

(End of narrative A001)

E001 DIMINISHING MANUFACTURING SOURCES AND MATERIAL ______________________________________________

SHORTAGES 1 EA $ ** NSP ** $ ** NSP ** _________ ______________ __________________

COMMODITY NAME: DMSMS SOURCE DATA

Packaging and Marking _____________________

6 54

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

DOC SUPPL

REL CD MILSTRIP ADDR SIG CD MARK FOR TP CD ______ ________ ______ ______ ________ _____

001 3

DEL REL CD QUANTITY DEL DATE __________ ______________ ___________

001 1 SEE DD FORM 1423

FOB POINT: Destination

SHIP TO:

(SPRBL1) DLA LAND AT ABERDEEN

DLR PROCUREMENT OPERATIONS - ZL

6001 COMBAT DRIVE RM C1-301

ABER PROV GRD,MD,21005

E002 ENGINEERING CHANGE PROPOSAL 1 EA $ ** NSP ** $ ** NSP ** ___________________________ ______________ __________________

COMMODITY NAME: ENGINEERING CHANGE PROPOSAL

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

DOC SUPPL

REL CD MILSTRIP ADDR SIG CD MARK FOR TP CD ______ ________ ______ ______ ________ _____

001 3

DEL REL CD QUANTITY DEL DATE __________ ______________ ___________

001 1 SEE DD FORM 1423

FOB POINT: Destination

SHIP TO:

(SPRBL1) DLA LAND AT ABERDEEN

DLR PROCUREMENT OPERATIONS - ZL

6001 COMBAT DRIVE RM C1-301

ABER PROV GRD,MD,21005

E003 REQUEST FOR VARIANCE 1 EA $ ** NSP ** $ ** NSP ** ____________________ ______________ __________________

COMMODITY NAME: REQUEST FOR VARIANCE

7 54

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

DOC SUPPL

REL CD MILSTRIP ADDR SIG CD MARK FOR TP CD ______ ________ ______ ______ ________ _____

001 3

DEL REL CD QUANTITY DEL DATE __________ ______________ ___________

001 1 SEE DD FORM 1423

FOB POINT: Destination

SHIP TO:

(SPRBL1) DLA LAND AT ABERDEEN

DLR PROCUREMENT OPERATIONS - ZL

6001 COMBAT DRIVE RM C1-301

ABER PROV GRD,MD,21005

8 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

Superseded Part Numbered Items (SEP 2016)__________________________________________

If an item part number is superseded during the term of this contract, the contractor shall advise the contracting officer immediately upon determination. The notice shall include complete information on the superseding item form, fit, function, configuration, application, or physical nature. The contracting officer will determine whether the item is acceptable to the Government, advise the contractor within seven days, and modify the contract accordingly.

Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)_______________________________________________________________________________________________________________________________

The contractor shall notify the contracting officer immediately upon determining the unavailability of obsolete materials or components.

The contractor may recommend a solution to include the impact on the contract price and delivery. The contractor shall not initiate any item redesign or incur any additional costs without the express, written authorization of the contracting officer.

In the event that manufacturing phase-out or discontinuance of production of such items is contemplated, the contractor is required to notify the contracting officer and publish the discontinuance in the Government-Industry Data Exchange Program (GIDEP), where feasible;

and to provide immediate advance notice of production phase-out to DLA DMSMS at dscc.dmsms@dla.mil.

Contractor Retention of Supply Chain Traceability Documentation (SEP 2016)___________________________________________________________________________

(1) By submitting a quotation or offer, the contractor agrees that, when the contractor is not the manufacturer of the item, it is confirming that it currently has or will obtain before delivery and shall retain documented evidence (supply chain traceability documentation) that the item is from the approved manufacturer and conforms to the technical requirements. The retention period is five years after final payment under this contract.

(2) At a minimum, the supply chain traceability documentation for the item shall include: basic item description, part number and/or national stock number, manufacturing source, manufacturing sources Commercial and Government Entity (CAGE) code, and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to item(s) acceptance by the Government. The documentation should also include, where available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.

(3) Examples of acceptable supply chain traceability documentation can be found at:

http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection-Avoidance-Program/

(4) The contractor shall immediately make available documentation upon request of the contracting officer. The contracting officer determines the acceptability and sufficiency of documentation. If the contractor fails to retain or provide the documentation or the contracting officer finds the documentation to be unacceptable, corrective action may be taken including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.

Unused Former Government Surplus Property (DEC 2016)_____________________________________________________

To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes __ No __

The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes __ No __

The material conforms to the revision letter/number, if any is cited. Yes __ No __ Unknown __

If No, the revision does not affect form, fit, function, or interface. Yes__ No __ Unknown __

The material was manufactured by:

(Name):

(Address):

(2) The offeror currently possesses the material Yes __ No __

9 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

If yes, the offeror purchased the material from a Government selling agency or other source. Yes __ No __ If yes, provide the following:

Government Selling Agency:

Contract Number:

Contract Date: (Month, Year):

Other Source:

Address:

Date Acquired: (Month/Year)

(3) The material has been altered or modified. Yes __ No __

If Yes, the offeror must provide the name of the company that performed the alteration or modification and attach or forward to the contracting officer a complete description of the alterations or modifications.

(4) The material has been reconditioned. Yes __ No __

If Yes, (i) the price offered includes the cost of reconditioning /refurbishment. Yes __ No __; and (ii) the offeror must provide information on the company that reconditioned the material with the certifications and attach or forward to the contracting officer a complete description of any work done or to be done, including the components to be replaced and the applicable rebuild standard.

The material contains cure-dated components. Yes __ No __

If Yes, (i) the price includes replacement of cure-dated components. Yes __ No __; and (ii) provide cure date to the contracting officer.

(5) The material has data plates attached. Yes __ No __

If Yes, the offeror must state below all information contained thereon, or forward a copy or facsimile of the data plate to the contracting officer.

(6) The offered material is in its original package. Yes __ No __

If yes, the offeror has stated below all original markings and data cited on the package; or has attached or forwarded to the contracting officer a copy or facsimile of original package markings:

Contract Number

NSN____________________________________________________________________

CAGE Code____________________________________________________________________

Part Number ________________________________________________________________________

Other Markings/Data___________________________________________________________

(7) The offeror has supplied this same material (National Stock Number) to the Government before. Yes __ No __

If Yes, (i) the material being offered is from the same original Government contract number as that provided previously. Yes __ No __;

and (ii) state below the Government Agency and contract number under which the material was previously provided:

10 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Agency

Contract Number_________________________________________________________________

(8) The material is manufactured in accordance with a specification or drawing. Yes __ No __

If Yes, (i) the specification/drawing is in the possession of the offeror. Yes __ No __; and (ii) the offeror has stated the applicable information below, or forwarded a copy or facsimile to the contracting officer. Yes __ No __

Specification/Drawing Number

Revision (if any)

Date____________________________________________________________________

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes __ No __

If Yes, (i) material has been re-preserved. Yes __ No __; (ii) material has been repackaged. Yes __ No __; (iii) percentage of material that has been inspected is ____%; and/or (iv) number of items inspected is _______; and (v) a written report was prepared. Yes __ No __;

and if Yes, the offeror has attached the written report or forwarded it to the contracting officer. Yes__ No__

The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation, Inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

The offeror has attached or forwarded to the contracting officer one of the following, to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):

___ For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.

___ For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.

___ When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number. (This information has already been provided in paragraph (c)(6) of this clause. Yes __ No __.)

___ When none of the above are available, other information to demonstrate that the offered material was previously owned by the

Government. Describe and/or attach.

This only applies to offers of Government surplus material. Offers of commercial surplus, manufacturers overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered

Items.

If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.

In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order. The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

11 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

*** END OF NARRATIVE C0001 ***

12 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

PACKAGING AND MARKING

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT___________________________________________

(1) Additional Packaging and Marking Requirements:

(a) Prohibited cushioning and wrapping materials: Use of asbestos, excelsior, newspaper, shredded paper (all types, including wax paper and computer paper), and similar hygroscopic or non-neutral materials and all types of loose-fill materials, including polystyrene, is prohibited for application such as cushioning, fill, stuffing, and dunnage. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material.

(b) MIL-STD-129 establishes requirements for contractors that ship packaged materiel to the Government to provide both linear bar codes and two-dimensional (2D) symbols on shipping labels. Shipping labels with 2D symbols are referred to as Military Shipping Labels (MSL) and are required on all CONUS and OCONUS shipments with the following exceptions:

(1) Subsistence items procured through full-line food distributors (prime contractors), market ready type items shipped within the

Continental United States (CONUS) to customers within CONUS;

(2) Any item for which ownership remains with the contractor until the item is placed in designated locations at the customer location prior to issuance to the customer. Government control begins upon placement of the item by the contractor into the designated location or issuance from the designated location by contractor personnel (i.e., the contractor is required to stock bins at the customer location and/or issue parts from a contractor controlled parts room).

(3) Bulk petroleum, oil and lubricant products delivered by pipeline; or tank car, tanker and tank trailer for which the container has a capacity greater than 450 L (119 gallons) as a receptacle for a liquid; a maximum net mass greater than 400 kg (882 pounds) and a capacity greater than 450 L (119 gallons) as a receptacle for a solid; or a water capacity greater than 454 kg (1000 pounds) as a receptacle for a gas.

(4) Medical items procured through Customer Direct suppliers or prime contractors that do not enter the Defense Transportation System.

(5) Delivery orders when the basic contract has not been modified to require MIL-STD-129.

(c) MIL-STD-129 provides numerous illustrations of what should be bar-coded and the recommended placement of the bar code. Further information is available on the DLA Packaging Web Site at:

http://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging.aspx

(2) Requirements for Treatment of Wood Packaging Material (WPM)

(a) Assets packed in or on wood pallets, skids, load boards, pallet collars, wood boxes, reels, dunnage, crates, frames, and cleats must comply with the Heat Treatment (HT) or Heat Treatment/Kiln Dried (HT/KD) (continuous at 56 degrees Centigrade for 30 minutes) standard in DoD Manual 4140.65-M "Compliance for Defense Packaging: Phytosanitary Requirements for Wood Packaging Material (WPM)". WPM must be stamped or branded with the appropriate certification markings as detailed in DOD 4140.65-M and be certified by an accredited American

Lumber Standards Committee (ALSC)-recognized agency. The WPM certification markings must be easily visible, especially in pallet loads, to inspectors.

(3)Palletization shall be in accordance with MD00100452, REVISION C, DATED 09/2016 found at http://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/Palletiz163 ation.aspx

(End of TQ Requirement)

*** END OF NARRATIVE D0001 ***

13 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

INSPECTION AND ACCEPTANCE

Product Verification Testing (SEP 2016)________________________________________

(1) When PVT is invoked, the QAR will notify the contractor that testing will be performed. The product verification testing (PVT) will be performed at a Government-designated testing laboratory.

(a) The contractor shall not ship or deliver any material unless directed to do so in writing by the contracting officer or until notified of acceptable PVT results.

(b) PVT results will be provided in 20 working days after receipt at the Government testing facility.

(2) The QAR will select a random sample from the contractors production lot. Selected PVT samples are to be shipped by the contractor at

Government expense with a copy of the Department of Defense DD Form 250 and a DD Form 1222. The packaging will be marked Product

Verification Test Samples, Contract Number __________, Lot/Item Number_________."

(3) Test results will indicate one of the following:

(a) Samples that pass testing and are not destroyed during evaluation will be returned to the contractor at the Government's expense and will be included as part of the total contract quantity. The contractor and Government may agree to dispose of samples not destroyed when the cost of the item does not justify the shipping expense. These samples will be considered part of the contract quantity. Samples that pass testing and are not returned to the contractor will be considered part of the contract quantity for payment and delivery. The contractor will deliver the remaining lot quantity minus sample units.

(b) If samples fail testing, such failure will result in rejection of the entire contract lot from which the samples were taken. At the

Governments discretion, parts failing any test criteria may be retained and not be returned to the contractor.

Inspection and Acceptance at Origin (SEP 2016)______________________________________________

The contractor shall indicate the location where supplies will be inspected:

Commercial and Government Entity (CAGE) code:___________________________________

Address:_____________________________________________________________________

Applicable to contract line-item numbers(s) (CLIN(s)):________________________________

The contractor shall indicate the location where packaging will be inspected:

( ) Same as for supplies OR

CAGE code: __________________________________________________________________

Address: _____________________________________________________________________

Applicable to CLIN(s): __________________________________________________________

*** END OF NARRATIVE E0001 ***

14 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DELIVERIES OR PERFORMANCE

Proc STO 211-9051 TIME OF DELIVERY - FIXED QUANTITY (JUNE 2015)_______________________________________________________________

TIME OF DELIVERY - FIXED QUANTITY

(a) Offers in response to this solicitation will be evaluated as specified in the solicitation. Delivery shall be offered in terms of a number of days after receipt of award. The number of delivery days required in this solicitation is calculated based on the Governments planned need and customer requirements. Unless delivery is identified elsewhere in the solicitation as an evaluation factor, Offerors are encouraged to conform their delivery terms as closely as possible to the delivery days required, and there will be no evaluation preference, or penalty for faster delivery. Offering a greater number of delivery days than the required delivery schedule may result in the offer not being considered, however the Government reserves the right to consider offered delivery times that exceed the number of delivery days required by the Government. Delivery is required by the Government in accordance with the following schedule:

Required delivery schedule

Item number Quantity Within number of days after date of award

0001/1001/2001/ 3,000 each 120 days after receipt of the order

3001/4001

1,500 each every 30 days thereafter until completion

(b) The Government may elect to consider for award only those offers that comply with the required delivery schedule but reserves the right to consider offered delivery times that exceed the number of delivery days required by the Government. The Offeror may propose an alternative delivery schedule below. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

Offeror's proposed delivery schedule

Item number Quantity Within number of days after date of award

0001/1001/2001/

3001/4001

(End of Text)

*** END OF NARRATIVE F0001 ***

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

1 52.211-17 DELIVERY OF EXCESS QUANTITIES SEP/1989

2 252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION JUN/2016

(a) Definitions. As used in this clause--

"Advance shipment notice" means an electronic notification used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency dentification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment.

"Bulk commodities" means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled conveyances, or pipelines:

(1) Sand.

(2) Gravel.

(3) Bulk liquids (water, chemicals, or petroleum products).

(4) Ready-mix concrete or similar construction materials.

(5) Coal or combustibles such as firewood.

(6) Agricultural products such as seeds, grains, or animal feed.

"Case" means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container.

"Electronic Product Code\TM\ (EPC)" means an identification scheme for universally identifying physical objects via RFID tags and other means. The standardized EPC\TM\ data consists of an EPC\TM\ (or EPC\TM\ identifier) that uniquely identifies an individual object, as

15 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC\TM\ tags. In addition to this standardized data, certain classes of EPC\TM\ tags will allow user-defined data. The EPC\TM\ Tag Data Standards will define the length and position of this data, without defining its content.

"EPCglobal" means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology.

"Exterior container" means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.

"Palletized unit load" means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the

Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

"Passive RFID tag" means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive

RFID tags that meet the EPCglobal\TM\ Class 1 Generation 2 standard.

"Radio frequency identification (RFID)" means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

"Shipping container" means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that--

(i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11:

(A) Subclass of Class I--Packaged operational rations.

(B) Class II--Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(C) Class IIIP--Packaged petroleum, lubricants, oils, preservatives, chemicals, and additives.

(D) Class IV--Construction and barrier materials.

(E) Class VI--Personal demand items (non-military sales items).

(F) Subclass of Class VIII--Medical materials (excluding pharmaceuticals, biologicals, and reagents--suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX--Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and

(ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/sci/RFID_ship-to-locations.html or to--

(A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to--

(B) The following location(s) deemed necessary by the requiring activity:

Contract line, subline, or exhibit Location name City State DoDAAC line item number

-1- -2- -3- -4- -5-

16 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(2) The following are excluded from the requirements of paragraph (b)(1) of this clause:

(i) Shipments of bulk commodities.

(ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast

Payment Procedures.

(c) The Contractor shall--

(1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more

RFID tags) and conforms to the requirements in paragraph (d) of this clause;

(2) Use passive tags that are readable; and

(3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-

129 (Section 4.9.2) tag placement specifications.

(d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPC\TM\ Tag Data

Standards in effect at the time of contract award. The EPC\TM\ Tag Data Standards are available at http://www.epcglobalinc.org/standards/.

(1) If the Contractor is an EPCglobal\TM\ subscriber and possesses a unique EPC\TM\ company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPC\TM\ Tag Data Standards document to encode tags.

(2) If the Contractor chooses to employ the DoD identifier, the Contractor shall use its previously assigned Commercial and Government

Entity (CAGE) code and shall encode the tags in accordance with the tag identifier details located at http://www.acq.osd.mil/log/sci/ait.html. If the Contractor uses a third-party packaging house to encode its tags, the CAGE code of the third-party packaging house is acceptable.

(3) Regardless of the selected encoding scheme, the Contractor with which the Department holds the contract is responsible for ensuring that the tag ID encoded on each passive RFID tag is globally unique, per the requirements in paragraph (c)(1) of this clause.

(e) Advance shipment notice. The Contractor shall use Wide Area WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic

Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag ID(s) (specified in paragraph (d) of this clause) in advance of the shipment in accordance with the procedures at https://wawf.eb.mil/.

(End of clause)

17 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT ADMINISTRATION DATA

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

1 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS MAY/2013

(a) Definitions. As used in this clause--

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this

Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the

WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer

Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

Invoice and Receiving Report

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

Inspection and Acceptance at Source

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC TBD

Issue By DoDAAC SPRBL1

Admin DoDAAC TBD

Inspect By DoDAAC TBD

Ship To Code W62G2T

Ship From Code TBD

Mark For Code TBD

Service Approver (DoDAAC) TBD

Service Acceptor (DoDAAC) TBD

Accept at Other DoDAAC TBD

LPO DoDAAC TBD

DCAA Auditor DoDAAC TBD

Other DoDAAC(s) TBD

18 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email

Notifications" field of WAWF once a document is submitted in the system.

mark.laskoski@dla.mil

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

N/A

(2) For technical WAWF help, contact the WAWF helpdesk at 866-

618-5988.

(End of clause)

19 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT CLAUSES

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

1 52.203-3 GRATUITIES APR/1984

2 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE JUL/2016

3 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS JAN/2017

4 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS DEC/2013

5 52.233-1 DISPUTES MAY/2014

6 52.253-1 COMPUTER GENERATED FORMS JAN/1991

7 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS SEP/2011

8 252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS SEP/2013

9 252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL DEC/2012

10 252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR OCT/2016

REPORTED CYBER INCIDENT INFORMATION

11 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING OCT/2016

12 252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT MAY/2016

13 252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS DEC/1991

14 252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC SEP/2004

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS

15 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS JUN/2012

16 252.232-7010 LEVIES ON CONTRACT PAYMENTS DEC/2006

17 252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS JUN/2013

18 252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES JUN/2013

19 252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA--BASIC APR/2014

20 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR JAN/2017

EXECUTIVE ORDERS--COMMERCIAL ITEMS

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division

E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

_X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006), with Alternate I (Oct 1995)(41 U.S.C. 4704 and

10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of

Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved].

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section

743 of Div. C).

_X_ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for

Debarment (Oct 2015) (31 U.S.C. 6101 note).

20 54

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

_X_ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).

__…