Exhibit B.pdf

PDF 163 KB Posted

Attached to
SELF LOCKING HEX NUT Federal contract opportunity
Solicitation number
SPMYM326Q6007
Issued by
Defense Logistics Agency Land and Maritime

About this file

This Contract Data Requirements List (DD Form 1423-1) details data submission requirements for a contract involving a Self Locking Hex Nut (Contract/PR No. 52824012 SPMYM326Q6007). Two specific data items are required from the contractor:

B001 is a Certificate of Compliance for Quality Compliance, and B002 is a Certification/Data Report for Chemical & Mechanical Certification. Both data items must be submitted one time, with material delivery, to Code 245. The requirements include providing technical content specific to contract line items, quantitative test results, evidence of correct specimen testing, and compliance with specified marking and certification requirements for controlled industrial material. Submission is governed by specific payment and submission clauses, with each data item required to be submitted under a separate shipment number. The document was prepared by Christopher Breton on 10/9/2025 and approved by Jason Laflamme on 10/21/2025.

View the file

Other files for this federal contract opportunity

Other files attached to SELF LOCKING HEX NUT, newest first.
File Type Posted
Clauses - Full Text Provisions and Clauses 250423.docx DOCX document
Exhibit A.pdf PDF
26Q6007 RFQ Required.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CONTRACT DAT A REQUIREMENTS LIST

245.2P- 1941-25 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. 8. EXHIBIT C.CATEGORY

A TOP X TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

SELF LOCKING HEX NUT 52824012 SPMYM326Q6007

2. TITLE of DATA ITEM 3. SUBTITLE1. DATA ITEM NO.

B001

CERTIFICATE OF COMPLIANCE CERTIFICATION OF

QUALITY COMPLIANCE

4. AUTHORITY(DATA Item Description Number) 5. CONTRACTREFERENCE 6. REQUIRING OFFICE

DI-MISC-81356A SECTIONC.2 CODE245

7. DD250REQ 9. DIST 10. FREQUENCY 12.DATE OF 1st 14. DISTRIBUTION STATEMENT SUBMISSION a. ADDRESSEE b. COPIES

DD

REQUIRED One Time DRAFT FINAL

With Material

8. APP.CODE 11. AS OF DATE 13. DATE OF REG REP

A

SUBSEQUENCE

RO

NIA NIA SUBMISSION CODE 133.2 0 I 0

NIA

16.REMARKS

1. Technical content as described in the respective contract line item(s).

2. For payment & submission of data refer to clauses 252.232-7006 & 252.232-7003 15. TOTAL 0 1 0 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number."

2. TITLE of DATA ITEM 3. SUBTITLEI. DATA ITEM NO.

B002 CERTIFICATION/ DATA REPORT CHEMICAL & MECHANICAL

CERTIFICATION

4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

DI-MISC-80678 SECTION: C. 3

CODE245

7. DD250REQ 9. DIST 10 FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION STATEMENT SUBMISSION a. ADDRESSEE b. COPIES

DD

REQUIRED

One Time WITH MATERIAL

DRAFT FINAL

A

8. APP. CODE 11. AS OF DATE 13. DATE OF REG REP

SUBSEQUENCE

RO

NIA NIA SUBMISSION CODE 133.2 0 1 0

NIA

16 REMARKS

1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 15. TOTAL 0 1 0 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.

G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE

CHRISTOPHER BRETON 10/9/2025 � Recoverable Signature

245.2P X Jason Laflamme 10/21/2025

Signed by: 27b40Sc8-a3b 7-4e9d -8c8f-3b 53ed e25c8d

DD FORM 1423-1 (FACSIMILE) PAGE 1 OF 1

0005-006

File details come from the government source that posted it. Updated .