Exhibit A.pdf
PDF 208 KB Posted
- Attached to
- SELF LOCKING HEX NUT Federal contract opportunity
- Solicitation number
- SPMYM326Q6007
About this file
This Document (DD Form 1423-1) is a Contract Data Requirements List for a Self Locking Hex Nut procurement, associated with contract number SPMYM326Q6007. The document outlines two specific data items that the contractor must submit: A001 Certificate of Compliance (Quality Compliance Certification) and A002 Certification/Data Report (Chemical & Mechanical Certification). Both data items are required to be submitted one time, with material delivery, under separate shipment numbers.
The technical requirements mandate detailed documentation including actual quantitative test results for chemical and mechanical tests, with specific provisions for fastener certification. The document requires evidence of testing the correct number of specimens, with new untested fasteners required for wedge tensile and yield strength testing. The procurement is managed by Code 245, with the data items prepared by Christopher Breton on 10/9/2025 and approved by Jason Laflamme on 10/21/2025. The contract references specific clauses for data submission and payment (252.232-7006 & 252.232-7003 or 52.232-36).
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Exhibit B.pdf | ||
| Clauses - Full Text Provisions and Clauses 250423.docx | DOCX document | |
| 26Q6007 RFQ Required.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DAT A REQUIREMENTS LIST
245.2P- 1941-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. 8. EXHIBIT C.CATEGORY
A TOP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
SELF LOCKING HEX NUT 52824011 SPMYM326Q6007
2. TITLE of DATA ITEM 3. SUBTITLE1. DATA ITEM NO.
A001
CERTIFICATE OF COMPLIANCE CERTIFICATION OF
QUALITY COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACTREFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTIONC.2 CODE245
7. DD250REQ 9. DIST 10. FREQUENCY 12.DATE OF 1st 14. DISTRIBUTION STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED One Time DRAFT FINAL
With Material
8. APP.CODE 11. AS OF DATE 13. DATE OF REG REP
A
SUBSEQUENCE
RO
NIA NIA SUBMISSION CODE 133.2 0 I 0
NIA
16.REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232-7003 15. TOTAL 0 1 0 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number."
2. TITLE of DATA ITEM 3. SUBTITLEI. DATA ITEM NO.
A002 CERTIFICATION/ DATA REPORT CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION: C. 3
CODE245
7. DD250REQ 9. DIST 10 FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED
One Time WITH MATERIAL
DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REP
SUBSEQUENCE
RO
NIA NIA SUBMISSION CODE 133.2 0 1 0
NIA
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 15. TOTAL 0 1 0 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
CHRISTOPHER BRETON 10/9/2025 � Recoverable Signature
245.2P X Jason Laflamme 10/21/2025
Signed by: 27b40Sc8-a3b 7-4e9d -8c8f-3b 53ed e25c8d
DD FORM 1423-1 (FACSIMILE) PAGE 1 OF 1
0002-003
File details come from the government source that posted it. Updated .