8205-3000_REVISED_SPECIFICATION.pdf

3D Printer

Specifications required by C/1010

C/1010 P.O.C. Mitch Van Epps (360)340-4229

Specifications:

1 each 3D Printer System with support equipment

CRUCIAL: 3D PRINTER SYSTEM HAS TO HAVE OSHA APPROVED CERTIFICATION (SEE EXPANATION BELOW) AND BE NRTL LISTED AS A UNIT, NOT JUST AS INDIVIDUAL COMPONENTS. AS AN OPTION FOR LISTING A 3rd

PARTY NRTL INSPECTION AND CERTIFICATION CAN BE USED.

• CRUCIAL: SOLUBLE SUPPORT STRUCTURE!

• CRUCIAL: FLEXIBLE MATERIALS

• CRUCIAL: 220-240 VAC, 3 PHASE, 50-60HZ/15A

• CRUCIAL: MINIMUM BUILD SIZE 24” X 13” X 19”

UNIT SHALL HAVE THE FOLLOWING ITEMS:

1 year maintenance

2 year extended warranty

3 extruders

HEPA Filtered with Liquid cooling for print head

Soft Polymer Feed Unit (SPFU) for printing with TPU’s softer than 95 ShoreA

Materials Management System

Must support multiple types of plastic modeling material with a minimum of the following: ABS, ASA, Nylon, PETG, TPU and PEKK.

Minimum layer thickness must be able to go to 50 microns

Positioning precision of .9 microns

Support equipment to dissolve modeling support structures included

User replaceable tungsten printing tips in sizes of .3mm .4mm .6mm and .8mm

Supplied with at least 2 sets of replaceable printing tips

Printing media materials to be pre-package, such as in a cartridge/spool form

Supplied with 6 spare printing material media units to include spools of:

ASA 2Kg, 2.85mm Natural or Black Elasto 95A .75kg, 2.85mm clear Elasto 85A .75kg, 2.85mm clear TECH-G 1kg, 2.85mm Clear PEKK 1kg, 2.85mm HIPS Breakaway support for ASA 2kg, 2.85mm SSU03 Water soluble support for TECH-G and TPUs 1kg, 2.85mm PA-CF (Nylon Carbon), 2.85mm

And 1 Omegasonics 1900BTX solvent tank or equivalent for removing support material.

Installation and training for printer and slicing software.