SPMYM2-22-Q-1826 (ADDITIONAL ORDERING DATA) 20819860 data - SLEEVE SEAL.pdf
PDF 101 KB Posted
- Attached to
- BEARINGS, CARRIER LLT Federal contract opportunity
- Solicitation number
- SPMYM2-22-Q-1826
About this file
This document contains a federal contract opportunity and related material ordering data. DLA Maritime Puget Sound is soliciting quotes for the procurement of Bearings, Carrier LLT in accordance with original equipment manufacturer specifications. The solicitation number is SPMYM2-22-Q-1826 and will be issued as a 100% total small business set aside using commercial and simplified acquisition procedures. Quotes are due by May 25, 2022 unless a later date is specified. Delivery of the bearings is required to Puget Sound Naval Shipyard by August 6, 2022. The related material ordering data provides specifications for procuring copper-base alloy centrifugal castings in accordance with ASTM B271, including alloy composition, dimensions, packaging, and other requirements.
View the file
Other files for this federal contract opportunity
Show all 21
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-B-271
IDN: N4523A 2081-9860
ICN: 38CTB56201 KO: S01 KOI: 031
Paragraph 4 Ordering data
A. ASTM B271/B271M, STANDARD SPECIFICATION FOR COPPER-BASE ALLOY
CENTRIFUGAL CASTINGS, dated 1 OCT 2018.
B. Quantity (length or number) of castings: 2 C. Copper Alloy UNS Number (Table 1): C90300 Temper: as-cast (as-cast, heat-treated, and so forth) D. Dimensions or drawing number: DWG 6641426 Rev B Condition (as cast, machined, and so forth): as-cast E. ASME Boiler and Pressure Vessel Code requirements are not required.
F. When castings are purchased for agencies of the U.S. Government, the Supplementary Requirements in Specification B824 may be specified.
S1. Referenced Documents S2. Quality Assurance S3. Identification Marking S4. Preparation for Delivery:
S4.1 Preservation, Packaging, Packing:
S4.1.1: Military Agencies- The material shall be separated by size, composition, grade, or class and shall be preserved and packaged, Level A or C, packed Level A, B or C, as specified in the contract or purchase order, in accordance with the requirements of Practice B900.
S4.2 Marking to be per the contract and MIL-STD-129.
G. The following are optional and should be specified in the purchase order when required:
Pressure test or soundness requirements (Specification B824) Approval of weld repair (Section 8) Certification (Specification B824) Foundry test report (Specification B824) Witness inspection (Specification B824) Product marking (Specification B824) Castings for seawater service (Section X1.2)
Additional Data Requirements:
Prepared By: Erik Sterbentz
Code: 260V
File details come from the government source that posted it. Updated .