3087C366-SPMYM123Q0078U0001 SOLICITATION AMENDMENT.pdf

N421583087C366

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

This amendment is hereby w ritten to correct ordering data.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 26-Jul-2023

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X SPMYM123Q0078

X 9B. DATED (SEE ITEM 11)

21-Jul-2023

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-Jul-2023

CODE

DLA MARITIME NORFOLK

MONICA RICHARDSON, CODE NMAB B2, 757-278-8371

PORTSMOUTH VA 23709-5000

SPMYM1 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SPMYM123Q0078

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 28-Jul-2023 05:00 PM to 01-Aug-2023 12:00 PM.

The following have been modified:

ORDERING DATA

3” I.D. X 3.73” O.D.

HOSE SHALL HAVE A WORKING PRESSURE OF 350 PSI MINIMUM AND 450 PSI MAXIMUM

HOSE SHALL HAVE A MINIMUM 16,000 PSI BURST PRESSURE

1.90 - 2.00 LBS MAXIMUM WEIGHT PER FOOT WITHOUT COUPLING

SHALL HAVE A TEMPERATURE RATING OF -40 DEGREES (F) TO 200 DEGREES (F)

SHALL BE WEATHER, OIL, SOLVENT, AND MILD ACID RESISTANT

SHALL HAVE NITRILE BLEND RUBBER WITH UHMPE WRAPPED FINISH COVER.

SHALL HAVE A NITRILE RUBBER INNER TUBE.

SHALL HAVE HIGH TENSILE DUAL STATIC WIRE PLIES (MINIMUM OF FOUR (4) FOR

REINFORCEMENT.

TO BE SUPPLIED IN 50 FOOT LENGTHS (+12” / -12”)

EACH HOSE ASSEMBLY SHALL HAVE THE FOLLOWING ADAPTERS ON EACH END,

CONNECTED TO THE HOSE FITTINGS: 3” MALE HEAVY DUTY CAMLOCK X HOSE SHANK

(PT COUPLING P/N: 1200530HG W/ 30EHD BRASS BODY) ON ONE END AND 3” FEMALE

HEAVY DUTY CAMLOCK X HOSE SHANK (PT COUPLING P/N: 1200330HG W/ 30CHD BRASS

BODY) ON THE OTHER END.

NOTE: EACH COUPLING SHALL BE PERMANTLY/MECHANICALLY ATTACHED BY

INTERNALLY EXPANDED, UTILIZING A STAINLESS STEEL FERRULE IN ACCORDANCE

WITH THE COUPLING MANUFACTURE RECOMMENDATION.

EACH ASSEMBLY SHALL HAVE A CAM AND GROOVE CAP AND PLUG INSTALLED FOR

CLEANLINESS.

NOTE: MATERIAL FOR CAP PLUG TO BE OTHER THAN STEEL OR ALUMUNUM. PLASTIC

CAPS AND PLUGS ARE ACCEPTABLE.

EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM, THE MFG’S NAME, CONTRACT

NUMBER AND PRESSURE RATING ON LAYLINE IN PERMANENT INK OR MOLDED INTO

COVERING.

SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND

FITTING) HAVE BEEN HYDROSTATICALLY TESTED AT 600 PSIG WITH CLEAN, FRESH

WATER FOR 30 MINUTES WITH ZERO LEAKS, WEEPS, END FITTING SLIPPAGE AND/OR

BULGES.

A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING 276, AND A COPY

IS TO BE SENT TO CODE 532 TO BE FILED WITH CONTRACT.

HOSE SHALL BE PARKER 7311NXT OR EQUIVALENT.

SPMYM123Q0078

AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT

TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM

ANY OR ALL OFFERORS DURING EVALUATION PROCESS.

HOSE MUST BE PALLETIZED

CODE 269 SHALL REVIEW OFFEROR’S SPECIFICATIONS PRIOR TO AWARD.

(End of Summary of Changes)