5032448_RH.pdf

PDF 7 MB Posted Jun 13, 2016

Attached to: SEE CORRECTIONS BELOW Federal contract opportunity
Solicitation number: SPMYM1-16-Q-0082
Issued by: Defense Logistics Agency Land and Maritime

About this file

From the source

See DWG 5032448 REV H

View the file

Other files for this federal contract opportunity

Other files attached to SEE CORRECTIONS BELOW, newest first.
File	Type	Posted
6124B405_Combo_solicitation.docx	DOCX document	Jun 14, 2016
6124B405_Combo_solicitation.docx	DOCX document	Jun 13, 2016

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

o c

REPORT COMMENTS TO:

NAVAL UNDERSEA WARFARE CENTER DIVISION NEWPORT

CODE 4123, BLDG 1246

1176 HOWELL ST

NEWPORT. RI 02841-1708

ATTN: DONNA SJOBLOM I DUANE MOSS

PHONE: (401)832-1292 I (401)832-4286

E-MAIL: DONNA.SJOBLOMeNAVY.MIL I

DUANE. MOSS.CTReNAVY.MIL

FAX: (401)832-7250

+ I

REVISIONS

REV SHEET DESCRIPTION DATE APPROVED

ADDED TEST ASSY 562. 563. 564. PC 225 &

Gl SEE SH 552-41. REVISED PC 172. 173 & 205. REV 9/23/99 CR2 & 3 GENERAL NOTE 6. 7. 13 & 14. DELETED 671

CLASS.

ADDED MULTIPLE TEST FIXTURES AND

ASSEMBLIES FOR 774 CLASS. RENUMBERED

ALL SHEETS INTO THREE SECTIONS (I-SO.

~,:slo Gt ~H ALL INDEX, 51-499. PARTS AND 500-END FOR

ASSEMBLIES). REMOVED OBSOLETE PARTS

AND ASSEMBLIES. INCORPORATED CHANGES

FROM ECP 412-06-027 NUWCDIVNPT AND

412-09-012 NUWCDIVNPT.

REVISIONS

REV SHEET DESCRIPTION DATE APPROVED

A 1-67 ADDED TEST FIXTURES RECUIRED BY 3/16/7B KING

REVISIONS TO REFERENCES 1-13

SHEETS 61 -67.

B ALL ADDED TRIDENT SsBN 726 TEST FIXTURES. 4/3/81 KING 0

ADDED SSN 688 CLASS TEST FIXTURES.

RENUMBERED ALL SHEETS.

8 72 REDESIGN OF TEST WEIGHT ASSEMBLY. 3/28/82 KINGCHI

C SEE ADDED sSN 594 CLASS TEST FIXTURE 3/3/84 JPD

SH 2 SHEETS 5, II, 73. INCORPORATED

COMMENTS FROM NAVSEA AND PERA (55).

0 SEE ADDED NOSE/TAIL PIECES AND 8/31/84 DRLSHEETS

2&3 LOADING POLE FIXTURES.

E SEE ADDED SSN 688 CLASS TEST 5/22/85 JPD5HEETS WEIGHT FOR 4600 L8 RATED LOAD.2R3

F SEE ADDED RAMMER TEST FIXTURE AND 5/19/86 JPB

SH 3 RAMMER TEST FIXTURE ADAPTOR.

REDESIGN OF TEST FIXTURE/TORPEDO

RAMMER

F SEE ADDED TEST FIXTURES AND PROCEDURES 12/15/88 JPB

CHI SH 3 RECUIRED FOR DOCKSIDE RETAINED

EOUIPMENT, SHTS 126-207.ADDED PCS 26-30

AIID 196.

F SEE ADDED MK 67 TEST WEIGHT AND VLs TEST 9/24/91 JPB C

CH2 SH 3 FIXTURE. SHTS 126-132.

G ALL DELETED OBSOLETE TEST FIXTURES, ADDED 7/30/96 GMH

sSN 21 TEST FIXTURES, REORGANIZED AND

RENUMBERED ALL SI-EETS

DISTRIBUTION STATEMENT D.

~DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY: ADMINISTRATIVE/FINACIAL

DATA 29 NOV 2008. OTHER REOUESTS FOR THIS

DOCUMENT SHALL BE REFERRED TO COMMANDER,

NUWC DIVISION. NEWPORT CODE 4123.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22. U.S.C. SEC. 2751 ET SEQ.)

OR THE EXPORT ADMINISTRATION ACT OF 1979. AS

AMENDED. TITLE 50, U.S.C .. APP 2401 ET SED.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVES

5230.25.

TEST FIXTURE

SUBMARINE WEAPON HANDLING

EOUIPMENT

ERIC. LEE 11/29/2008

B. ALDRICH 12/15/2008

J. CASSIDY 12/08/2008

~:;:7;;"' SIZE I CAGE NO. I SWBS I IREV

Hc§JL lJi.~ ,/b jA, B 53711 709 5032448 NAVSEA 05ZW (ffr'3/()r-~-ICA-LE---'--N-I-A--,---I---L.---....l...--,...I-SHE-E-T--1--0-F -1.1....8-6---1

I ' I

CHECKED

PREPARED

ENGINEER

CONTRACT NO. NIe604-03-0-0016

FSCM NO. 99799

COMPUTER

GENERATED DRAWING

DA TA SET NAMES

5032448 001 1H ·TFIX

5032448 1 SHT

CONTROL NO.:

08-TESTFIX-5032448-001-1H

DEPARTMENT OF THE NAVY

I BAE ~YSTEMS I NAVAL SEA SYSTEMS CCIMMAND

PLOT DATE: 12-01-2008 , ~ HI /L! "'r~2~: 1..,---.- WASH I NGTON. D. C. 20362

I--GR_A_P_H_I_CS_S_Y_S_TE_M_:_C_A_OA_M_®__---1#l '-l .1Y1JI 7,7P'-q;Ct~-----------------------l ~~ OAre j

5032448-001-1H-TFIX

I • I I

INDEX II\JDEX

SHEET NO. TITLE REV SHEET NO. TITLE REV

1 TITLE SHEET H 72 LIFTING BAR H

0 2 INDEX H 73 LIFTING BAR H 0

3 INDEX (CONTINUED) H 74 LIFTING BAR H

4 INDEX (CONTINUED) H 75 STRONGBACK, LASHING STRAP TEST ASSEMBLY H

5 REFERENCES H 76 PIVOT, LASHING STRAP TEST ASSEMBLY H

6 GENERAL NOTES H 77 NUT, LASHING STRAP TEST ASSEMBLY H

7 GENERAL NOTES (CONTINUED) H 78 SCREW, LASHING STRAP TEST ASSEMBLY H

8 MATERIAL LIST H 79 ADAPTER, LASHING STRAP TEST ASSEMBLY H

- 9 MATERIAL LIST (CONTINUED) H 80 TEST STAND H -

10 MATER IAL LI ST (CONTINUED) H 81 TEST STAND DETAILS H

11 ASSEMBLY LIST H 82 REVERSIBLE SLIDING HEAD. TEST STAND EQUIPMENT H

12 ASSEMBLY LIST (CONTINUED) H 83 BUTTON TEST ADAPTER, TEST STAND EQUIPMENT H

13 ASSEMBLY LIST (CONTINUED) H 84 MK 14 - 16 TEST ADAPTER. TEST STAND EQUIPMENT H 14 ASSEMBLY LIST (CONTINUED) H 85 PWR LOG POLE TEST ADAPTER, TEST STAND EQUIPMENT H

15 ASSEMBLY LIST (CONTINUED) H 86 TORPEDO BELLMOUTH H

C16 BLANK SHEET H 87 LINE, TEST H

88 SLING, TEST H

89 LINE, TEST H

SPACES RESERVED FOR ADDITIONAL SHEETS 90 MK 48 TORP LOG ADAP BUTTON TEST FIXTURE (TENSION TEST) H

91 MK 48 TORP LOG ADAP BUTTON TEST FIXTURE (COMPRESSION TEST) H

92 MK 48 TORP LOG ADAP TEST FIXTURE, TEST STAND EQUIPMENT H

--... 50 STRONGBACK , 72" LONG. 12,500 LB CAPACITY H 93 TEST ADAPTER, PWR LOG POLES (TENSION TEST) H ..olIIIl T 51 TEST FIXTURE, TORPEDO RAMMER H 94 TEST ADAPTER, PWR LOG POLES (COMPRESSION TEST) H "'IIIIf

52 WOOD CYLINDERS, 19 INCH, 21 INCH & 26.5 INCH H 95 TEST ADAPTER, PWR LOG POLES (TENSION TEST) H 53 STRONGBACK , RAMMER TEST H 96 TEST ADAPTER, PWR LOG POLES (COMPRESSION TEST) H 54 PADEYE, TEST 25,000 LB CAPACITY H 97 TEST ADAPTER. WEAPON POSITIONING CABLE MECHANISM H

55 TEST FIXTURE, TORPEDO RAMMER H 98 TEST ADAPTER, WEAPON EMERGENCY HANDLING H

56 TEST FIXTURE, RAMMER H 99 TEST ADAPTER, WEAPON POSITIONING CABLE MECHANISM H

B 57 RAMMER TEST FIXTURE DETAILS H 100 SNUBBING MECHANISM, PADEYE H B58 RAMMER TEST FIXTURE DETAILS (CONTINUED) H 101 STRONGBACK, 25" LONG, 10,500 LB CAPACITY H

59 ADAPTER, RAMMER TEST FIXTURE H 102 DOLLY TRACK FIXTURE H

60 SPECIAL SHACKLE, SHIPPING TRAY HYDRAULIC CYLINDER H 103 DOLLY TRACK FIXTURE (CONTINUED) H

61 YOKE H 104 DOLLY TRACK FIXTURE (CONTINUED) H

62 SHAFT H 105 LOCKBAR STRONGBACK H

63 19" DIA WOOD TEST SHAPE AND FITTINGS H 106 TEST ADAPTER, WEAPON POSITIONING CABLE MECHANISM H

- 64 21" DIA MK 48 WOOD TEST SHAPE AND FITTING H 107 TEST ADAPTER, DECK SKID REMOVAL PADEYE H -

65 TEST SHAPE, 21" DIA WOOD BELLY BAND H 108 SECURING BAND TEST FIXTURE H

66 TEST STAND, NOSE PIECE H 109 21" DIA WOOD SHAPE ADAPTER H

67 TEST STAND, NOSE PIECE (CONTINUED) H 110 TEST ADAPTER, WEAPON POSITIONING CABLE MECHANISM H

68 TEST STAND, NOSE PIECE (CONTINUED) H 111 CABLE TEST ADAPTER H

69 STRONGBACK H 112 RAMMER TEST ADAPTER H

70 LIFTING BAR H 113 BUTTON TEST ADAPTER (COMPRESSION) H

A 71 LIFTING BAR H 114 BUTTON TEST ADAPTER (TENSION) H A

DRAWING TITLE NAVSEA DRAWING NO.

I t\IDEX B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 2 OF

I + I I

5032448-002-1H-TFIX

SHEET NO. TITLE REV SHEET NO. TITLE REV

115 RAMMER TEST ADAPTER H 158 WEAPON RESTRAINING POST, TEST FIXTURE H

0 116 TEST ADAPTER, DECK SKID REMOVAL CABLE H 159 CRADLE RESTRAINING POST, TEST FIXTURE H 0

117 NOSEPIECE BAND TEST ADAPTER H 160 TEMPORARY LASHING STRAP, TEST FIXTURE H

118 CABLE TEST ADAPTER H 161 TEMPORARY LASHING STRAP, TEST ADAPTER H

119 POST FIXTURE H 162 PREVENTER STRAP, TEST ADAPTER H

120 26.5" DIA WOOD TEST SHAPE H 163 BUTTON TEST ADAPTER, TEST STAND EOUIPMENT H

121 FISH PLATE H 164 BLANK SHEET H

122 SPACER H

- 123 TEST ADAPTER H -

124 CLEVIS FIXTURE H

125 CLEVIS FIXTURE (CONTINUED) H

126 ADAPTER, CRADLE LASHING BAND, TEST FIXTURE H

127 STRONGBACK , RAMMER TEST H

128 PUMP PLATE, PADEYE TEST ASSY H

129 CRADLE LASHING BANDS HALF RING WELDMENT H

C130 CRADLE LASHING BANDS HALF RING WELDMENT (CONTINUED) H

131 CRADLE LASHING BANDS HALF RING WELDMENT (CONTINUED) H

132 PADEYE TEST UPPER ASSEMBLY H

133 PADEYE TEST UPPER ASSEMBLY (CONTINUED) H

134 PADEYE TEST UPPER ASSEMBLY (CONTINUED) H

135 PADEYE TEST LOWER ASSEMBLY H

--... 136 PADEYE TEST LOWER ASSEMBLY (CONTINUED) H ..olIIIl T 137 PADEYE TEST LOWER ASSEMBLY (CONTINUED) H "'IIIIf

138 CONNECTING LINK ASSEMBLY, LIFTING H

139 CONNECTING LINK ASSEMBLY, POSITIONING H

140 CONNECTING LINK ASSEMBLY, LONG TEMPORARY H

141 CONNECTING LINK ASSEMBLY, SHORT TEMPORARY H

142 CONNECTING LINK ASSEMBLY, EMERGENCY H

B 143 CONNECTING LINK ASSEMBLY, EMERGENCY (CONTINUED) H B144 NOSEPIECE TEST STAND, LOWER ADAPTER H

145 NOSEPIECE TEST STAND, LOWER ADAPTER (CONTINUED) H

146 NOSEPIECE TEST STAND, LOWER ADAPTER (CONTINUED) H

147 NOSEPIECE TEST STAND, LOWER ADAPTER (CONTINUED) H

148 NOSEPIECE TEST STAND, UPPER ADAPTER H

149 NOSEPIECE TEST STAND, UPPER ADAPTER (CONTINUED) H

- 150 NOSEPIECE TEST STAND, UPPER ADAPTER (CONTINUED) H -

151 NOSEPIECE TEST STAND, UPPER ADAPTER (CONTINUED) H

152 RAMMER, TEST FIXTURE H

153 RAMMER, TEST FIXTURE (CONTINUED) H

154 BRIDLE PULL, TEST FIXTURE H

155 CHAIN HOIST, TEST FIXTURE H

156 CHAIN HOIST, TEST FIXTURE (CONTINUED) H

A 157 RESTRAINING STRAP, TEST FIXTURE H A

DRAWING TITLE NAVSEA DRAWING NO.

I~IDEX (CCINTINLlED) B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 3 OF

5032448-003-1H-TFIX

SHEET NO. TITLE REV SHEET NO. TITLE REV

500 ASSEMBLY 505. 506 & 559 TEST ASSEMBLY H 543 ASSEMBLY 565. CRADLE LASHING BANDS TEST WSHS H

0 501 ASSEMBLY 51B & 519 LASHING STRAP TEST ASSEMBLY H 544 ASSEMBLY 565. CRADLE LASHING BANDS TEST WSHS. (CONTINUED) H 0 502 ASSEMBLY 522 TORPEDO TEST WEIGHT H 545 ASSEMBLY 566. PAD EYE. CRADLE LIFT TEST ASSEMBLY H 503 ASSEMBLY 522 TORPEDO TEST WEIGHT (CONTINUED) H 546 ASSEMBLY 567. PAD EYE. POSITIONING TEST ASSEMBLY H 504 ASSEMBLY 522 TORPEDO TEST WEIGHT (CONTINUED) H 547 ASSEMBLY 568. PAD EYE. TEMPORARY TEST H 505 ASSEMBLY 522 TORPEDO TEST WEIGHT (CONTINUED) H 548 ASSEMBLY 569. PAD EYE. EMERGENCY TEST H 506 ASSEMBLY 522 TORPEDO TEST WEIGHT (CONTINUED) H 549 ASSY 570. SSN 774 CLASS WEAPONS CRADLE SHIPPING TEST WEIGHT H 507 ASSEMBLY 522 TORPEDO TEST WEIGHT (CONTINUED) H 550 ASSY 570. SSN 774 CLASS WEAPONS CRADLE SHIPPING TEST WEIGHT H

- 508 ASSEMBLY 522 TORPEDO TEST WEIGHT (CONTINUED) H 551 ASSY 570. SSN 774 CLASS WEAPONS CRADLE SHIPPING TEST WEIGHT H -

509 ASSEMBLY 525 NOSE PIECE TEST ARRANGEMENT H 552 ASSY 570. SSN 774 CLASS WEAPONS CRADLE SHIPPING TEST WEIGHT H 510 ASSEMBLY 535 HAND LOADING POLE TEST ARRANGEMENT H 553 ASSY 570. SSN 774 CLASS WEAPONS CRADLE SHIPPING TEST WEIGHT H 511 ASSY 547. 548. 550 & 551 POWER LOADING POLE TEST ARRANGEMENT H 554 ASSY 570. SSN 774 CLASS WEAPONS CRADLE SHIPPING TEST WEIGHT H 512 ASSEMBLY 549 POSITIONING MECHANISM TEST ARRANGEMENT H 555 ASSY 570. SSN 774 CLASS WEAPONS CRADLE SHIPPING TEST WEIGHT H

513 ASSEMBLY 552 TEST WEIGHT. 4600 LB RATED LOAD H

514 ASSEMBLY 552 TEST WEIGHT. 4600 LB RATED LOAD (CONTINUED) H

C515 ASSEMBLY 552 TEST WEIGHT. 4600 LB RATED LOAD (CONTINUED) H

516 ASSEMBLY 552 TEST WEIGHT. 4600 LB RATED LOAD (CONTINUED) H

517 ASSEMBLY 552 TEST WEIGHT. 4600 LB RATED LOAD (CONTINUED) H

518 ASSEMBLY 552 TEST WEIGHT. 4600 LB RATED LOAD (CONTINUED) H

519 ASSEMBLY 552 TEST WEIGHT. 4600 LB RATED LOAD (CONTINUED) H

520 ASSEMBLY 552 TEST WEIGHT. 4600 LB RATED LOAD (CONTINUED) H

--... 521 ASSEMBLY 553 WEAPON EMERGENCY HDLG TEST ARRANGEMENT H ..olIIIl T 522 ASSEMBLY 554 TEST WEIGHT MK 67. 1400 LB RATED LOAD H "'IIIIf

523 ASSEMBLY 554 TEST WEIGHT MK 67. 1400 LB RATED LOAD H

524 ASSEMBLY 555 VLS BALLAST CAN TEST FIXTURE H

525 ASSEMBLY 555 VLS BALLAST CAN TEST FIXTURE. (CONTINUED) H

526 ASSEMBLY 555 VLS BALLAST CAN TEST FIXTURE. (CONTINUED) H

527 ASSEMBLY 555 VLS BALLAST CAN TEST FIXTURE. (CONTINUED) H

B 528 ASSEMBLY 555 VLS BALLAST CAN TEST FIXTURE. (CONTINUED) H B529 ASSEMBLY 558 SECURING BAND ASSEMBLY H

530 ASSEMBLY 560 TEST WEIGHT. 7800 LB RATED LOAD H

531 ASSEMBLY 560 TEST WEIGHT. 7800 LB RATED LOAD (CONTINUED) H

532 ASSEMBLY 560 TEST WEIGHT. 7800 LB RATED LOAD (CONTINUED) H

533 ASSEMBLY 560 TEST WEIGHT. 7800 LB RATED LOAD (CONTINUED) H

534 ASSEMBLY 560 TEST WEIGHT. 7800 LB RATED LOAD (CONTINUED) H

- 535 ASSEMBLY 560 TEST WEIGHT. 7800 LB RATED LOAD (CONTINUED) H -

536 ASSEMBLY 561 TORPEDO TEST WEIGHT. ALTERNATE H

537 ASSEMBLY 561 TORPEDO TEST WEIGHT. ALTERNATE (CONTINUED) H

538 ASSEMBLY 561 TORPEDO TEST WEIGHT. ALTERNATE (CONTINUED) H

539 ASSEMBLY 561 TORPEDO TEST WEIGHT. ALTERNATE (CONTINUED) H

540 ASSEMBLY 562 SPACER ASSEMBLY H

541 ASSEMBLY 563 TEST ADAPTER H

A 542 ASSEMBLY 564 CLEVIS FIXTURE H A

DRAWING TITLE NAVSEA DRAWING NO.

I~IDEX (CCINTINLlED) B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 4 OF

5032448-004-1H-TFIX

0 0 c c

B B

8 NSSN/774 CL TEST LOADS/METHODS 752-7286057 III

7 TORPEDO BELLMOUTH 10001-3180894 III

- 6 SSBN 726 CL WPN HDLG EMERGENCY LOADING ASSY & DET 709-4862607

5 WPN HANDLING SYS TEST WEIGHT FOR 4600 LB RATED LOAD 709-5486328

4 SSN 21 CL TEST LOADS/METHODS SUB WPN HDLG EQPT 752-6726350

3 VLS SSN 688 CL TEST LOADS/METHODS SUB WPN HDLG EQPT 709-6633924

2 SSBN 726 CL TEST LOADS/METHODS SUB WPN HDLG EQPT 709-5549374

1 SSN 688 CL TEST LOADS/METHODS SUB WPN HDLG EQPT 709-5549373

NO. TITLE DRAWING NO.

A REFERENCES A

DRAWING TITLE NAVSEA DRAWING NO.

REFERENCES B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 5 OF

5032448-005-1H-TFIX

I I I

13. THE FOLLOWING DIMENSIONAL TOLERANCES APPLY UNLESS OTHERWISE SPECIFIED:

c o

ANGLE

DEGREES

FRACTIONDECIMAL

DIMENSIONAL

TYPE 2 PLACE 3 PLACE

.XX .XXX

-MACHINE-

ALL ±.03 ±.01O ±1/32

-WELDING-

UNDER 24- ±.06 ±3/16

24- & OVER ±.12 ±1I4

-CASTING-

UNDER 2- ±1/16

2 TO 5 ±.06 +3/32. -1116

5 TO 8 +.09.-.06 +1/8. -3/32

8 TO 12 +.19.-.13 +3/16, -118

12 TO 15 +.25. -.19 +114. -3/16

15 & OVER ±.25 ±1I4

-ANGLES-

14. TEST FIXTURE TEST REQUIREMENTS:

UPON COMPLETION OF ASSY/FABRICATION, ALL TEST FIXTURES. SHALL BE

LOAD TESTED TO THE MAXIMUM TEST LOAD APPLIED. THIS REQUIREMENT

MAY BE SATISFIED UPON INITIAL USE AT 100 PERCENT OF MAXIMUM LOAD.

ALL LOAD BEARING WELDMENTS SHALL BE NONDESTRUCTIVELY TESTED IN

ACCORDANCE WITH NOTE 7 PRIOR AND SUBSEQUENT TO INITIAL LOAD TEST

PER 14.A AND FOLLOWING REPAIRS OR MODIFICATION UNLESS OTHERWISE

SPECIFIED.

ALL TEST FIXTURES SHALL BE LOAD TESTED PER 14.A FOLLOWING

REPAIRS OR MODIFICATION.

A DETAILED VISUAL INSPECTION SHALL BE CONDUCTED PRIOR AND

SUBSEQUENT TO LOAD TESTING PER 14.A AND 14.C AND AT

INTERVALS NOT TO EXCEED 12 MONTHS. (VI)

ALL TEST FIXTURES SHALL RECEIVE A VISUAL INSPECTION FOR

DAMAGE/DEFORMATION PRIOR TO EACH USE. (VI)

15. TEST STANDS. PCS 104 AND 157, TO HAVE TWO COATS OF FORMULA 84 ZINC

CHROMATE PER TT-P-645 PRIOR TO FINISH COAT OF FORMULA 5H (NAVY HAZE

GREY NO. 27) PER MIL-E-24635.

16. TEST STAND. PC 157, AND ASSOCIATED EQUIPMENT IS DESIGNED FOR USE WITH

A HAND CHAIN HOIST, PC 166. HAVING A SIX FOOT DRIFT.

GENERAL NOTES:

1. UNLESS OTHERWISE SPECIFIED:

SURFACE FINISH AS ROLLED OR CUT

BREAK SHARP EDGES R.005-.015 OR CHAMFER.

SURFACE ROUGHNESS 250 MICRO INCHES IN ACCORDANCE WITH ASME B46.1.

2. ALL EXPOSED SURFACES SHALL BE FREE OF SHARP OR ROUGH AREAS THAT

WOULD BE A HAZARD TO PERSONNEL OR WEAPONS HANDLING EQUIPMENT.

3. QUANTITIES ARE GIVEN FOR ONE OF EACH ASSEMBLY. NOTE THAT SOME

ASSEMBLIES ARE DESIGNED FOR EASY DISASSEMBLY AND REASSEMBLY WITH

DIFFERENT ATTACHMENT ADAPTERS TO MAKE UP A NEW ASSEMBLY (ASSEMBLIES

505. 506. 518 AND 519 ARE OF THIS TYPE). FOR THESE ASSEMBLIES TEST

FACILITIES NEED ONE BASIC ASSEMBLY AND THE DIFFERENT ATTACHMENT

ADAPTERS AS NECESSARY TO MAKE UP THE REQUIRED ASSEMBLIES.

4. LAMINATE PC 6-1. 7-1. 207-1 AND 209 FROM 1-1/2- THK X 3- TO 6- WIDE

SECTIONS OF SELECT MAPLE. USE WATERPROOF WHITE GLUE ASTM 0 4689-90 OR

EQUAL. ALTERNATE GRAIN 90° AS SHOWN. SAND SMOOTH AND PAINT PER

MIL-STD-1303B(OS) SYSTEM NO. 33.

5. DELETED.

6. ALL WELDING AND INSPECTION OF MATERIAL OR STRUCTURE OTHER THAN HY-80

STEEL SHALL BE IN ACCORDANCE WITH MIL-STD-1689 UNLESS OTHERWISE

SPECIFIED.

7. MT OR PT ALL WELDS IN ACCORDANCE WITH MIL-STD-271. -NONDESTRUCTIVE

TESTING REQUIREMENTS FOR METALS.- ACCEPTANCE CRITERIA TO BE IN

ACCORDANCE WITH MIL-STD-2035 UNLESS OTHERWISE SPECIFIED.

8. METAL PIECES ARE TO BE PAINTED IN ACCORDANCE WITH MIL-STD-1303(OS).

SYSTEM NO. 37. COLOR GREY.

9. STENCIL LETTERINGS IN ACCORDANCE WITH MIL-STD-1303(OS). SYSTEM

NO. 54 AND AS SPECIFIED ON THIS DRAWING.

10. IF COMMERCIAL EQUIPMENT IS SUBSTITUTED. LOAD CAPACITY MUST BE EQUAL

TO OR GREATER THAN TEST FIXTURE COMPONENTS DESIGNED WITH THIS

STANDARD DRAWING.

11. STANDARD TEST FIXTURES DESIGNED BY THIS DRAWING CAN BE DEVIATED

FROM IF THE FOLLOWING CONDITIONS ARE MET:

(1) TESTING ACTIVITY HAS EQUIVALENT TEST FIXTURES -IN HOUSE.

E.G .. ESC PROOF TEST MACHINE.

(2) COMMERCIALLY MANUFACTURED EQUIPMENT CAN BE OBTAINED AND

SUBSTITUTED FOR TEST FIXTURES COMPONENTS SUCH AS HOOKS,

SHEAVES AND LINES, ETC.

12. ZINC RESIN SOCKETING OF WIRE ROPE SHALL BE IN ACCORDANCE WITH NAVSHIPS

TECH MANUAL, CHAPTER 613.IIII

c o IIII

+1111

-III

17. MOUNTING HOLES ARE PROVIDED IN THE FEET OF TEST STAND. PC 157. FOR USE

WITH 1/2 DIA BOLTS. TEST STAND MAY BE MOUNTED ON FOUNDATION. DECK OR

BULKHEAD TO SUIT TESTING ACTIVITY.

DRAWING TITLE

GENERAL NOTES

I + I

NAVSEA DRAWING NO.

B I 53711 709 I 5032448

SCALE: N/ A ISHEET 6 OF

5032448-006-1H-TFIX

GENERAL NOTES (CONT):

18. REVERSIBLE SLIDING HEAD, PC 158, IS DESIGNED TO BE MOVED ALONG THE

TEST STAND, PC 157, AND LOCKED IN VARIOUS POSITIONS WITH BALL LOCK

0PIN, PC 186, AND TO BE REVERSED ON TEST STAND FOR CHANGING LOAD

TESTS FROM TENSION TO COMPRESSION, AS SHOWN IN TEST ARRANGEMENTS.

19. TEST STRAP, PC 23, TO BE EYE AND EYE, HT-EYE TYPE IV, BASKET CAPACITY

11,400 LB POLYESTER WEBBING, STOCK NO. EE2-92PHT AS MANUFACTURED BY

LIFTEX SLING INC. OR EQUIV

20. CHOKER SLING, PC 30, TO BE TYPE RE3-604 AS MANUFACTURED BY LIFTALL

COMPANY, INC .. 102 S. HEINZELMAN ST., MANHEIM. PA. OR EQUAL.

- REFER TO NAVSEA DWG 709-5486328, SH 5, FOR TESTING REQUIREMENTS. -

C C

B B

A A

DRAWING TITLE

NAVSEA DRAWING NO.

GEt\IERAL NOTES (CCINTINLlED) B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 7 OF

5032448-007-1H-TFIX

PC DESCRIPTION MATERIAL REMARKS APPLICABILITY SHEETNO.

1 STRONGBACK, 72" LONG, 12,500 LB CAPACITY AL ALY SEE MATERIAL LIST ON SH 50 688 50

3 TEST FIXTURE, TORPEDO RAMMER STEEL MIL-S-22698, GR B 688 51

6 WOOD CYLINDER, 19" DIA WOOD SEE MATERIAL LIST ON SH 52 21 52

07 WOOD CYLINDER, 21" DIA WOOD SEE MATERIAL LIST ON SH 52 21/688/726/774 52

8 STRONGBACK, RAMMER TEST STEEL SEE MATERIAL LIST ON SH 53 688/726 53

14 PADEYE, TEST 25,000 LB CAPACITY STEEL MIL-S-22698 GR DH-36 21/688/726/774 54

20 TEST FIXTURE, TORPEDO RAMMER STEEL SEE MATERIAL LIST ON SH 55 726 55

24 TEST FIXTURE, RAMMER STEEL SEE MATERIAL LIST ON SH 56 726 56

25 ADAPTER, RAMMER TEST FIXTURE STEEL MIL-S-22698, GR B 726 59

26 SPECIAL SHACKLE, SHIPPING TRAY HYDRAULIC CYLINDER STEEL SEE MATERIAL LIST ON SH 60 688 60-

30 CHOKER SLING, TEST WEIGHT SHIPPING SEE NOTE 20 21/774

40 ROPE, WIRE, .062 DIA, LG AS REOD CRES MIL-W-83420, TY 1, 7 X 7 COMP A 21/688/726

41 SLEEVE, SWAGING .062 DIA. CRES MS 51844-1 21/688/726

68 ROPE, POLYESTER, 3" CIRC. 51' LG POLYESTER MIL-R-30500 774

80 YOKE STEEL SEE MATERIAL LIST ON SH 61 21/688/726/774 61

81 SHAFT STEEL ASTM A108 G 10200 21/688/726/774 62

C 82 WASHER, FLAT, 2 0.0. X 1.38 1.0. X .165 THK STEEL FF-W-92, TY A, GR I , CL A 21/688/726/774 C83 PIN LOCK, .125 DIA X 3.38 LG SPR STL MIL-R-52243 21/688/726/774

100 19" DIA WOOD TEST SHAPE AND FITTINGS SEE MATERIAL LIST ON SH 63 21 63

101 21" DIA MK 48 WOOD TEST SHAPE AND FITTINGS SEE MATERIAL LIST ON SH 64 21/726/774 64

102 TEST SHAPE, 21" DIA WOOD BELLYBAND SEE MATERIAL LIST ON SH 65 726 65

104 TEST STAND, NOSE PIECE STEEL SEE MATERIAL LIST ON SH 66 21/726/774 66

105 STRONGBACK STEEL SEE MATERIAL LIST ON SH 69 21/726/774 69

+106 ROPE, WIRE, 1/2" DIA RR-W-410, TY I, CL 3, 6 X 37 -

107 SOCKET, OPEN SPELTER, 1/2" STEEL RR-S-550 -

108 SLEEVE, SWAGING, 1/2" DIA CRES -

109 LIFTING BAR STEEL MIL-S-22698 726 70

110 LIFTING BAR STEEL SEE MATERIAL LIST ON SH 71 726 71

111 LIFTING BAR STEEL SEE MATERIAL LIST ON SH 72 726 72

112 LIFTING BAR STEEL MIL-S-22698 TBD 73

B 113 LIFTING BAR STEEL MIL-S-22698 TBD 74 B

131 STRONGBACK, LASHING STRAP TEST ASSEMBLY AL ALY SEE MATERIAL LIST ON SH 75 688/726/774 75

132 PIVOT, LASHING STRAP TEST ASSEMBLY STEEL MIL-S-22698, GR B 688/726 76

133 NUT, LASHING STRAP TEST ASSEMBLY STEEL MIL-S-22698, GR A 688/726 77

134 PIN, SPRING, .250 DIA X 3 LG CRES MS 171666 688/726

135 PIN, SPRING, . 188 0 IA X 2 LG CRES MS 171602 688/726

136 SCREW, LASHING STRAP TEST ASSEMBLY STEEL ASTM A108 G 10200 688/726 78

- 148 ADAPTER, LASHING STRAP TEST ASSEMBLY STEEL MIL-S-22698, GR DH-36 688/726 79 -

157 TEST STAND STEEL SEE MATERIAL LIST ON SH 80 21/688/726/774 80

158 REVERSIBLE SLIDING HEAD, TEST STAND EOUIPMENT CRES SEE MATERIAL LIST ON SH 82 21/688/726/774 82

159 BUTTON TEST ADAPTER, TEST STAND EOUIPMENT CRES 00-S-763 21/688/726/774 83

160 MK 14 - 16 TEST ADAPTER, TEST STAND EOUIPMENT CRES 00-S-763 TBD 84

161 PWR LOG POLE TEST ADAPTER TEST STAND EOUIPMENT CRES 00-S-763 - 85

162 TORPEDO BELLMOUTH SEE MATERIAL LIST ON SH 86 21/688/774 86

A163 LINE, TEST SEE MATERIAL LIST ON SH 87 688 87

DRAWING TITLE NAVSEA DRAWING NO.

MATERIAL LIST B 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 8 OF

5032448-008-1H-TFIX

164 SLING, TEST SEE MATERIAL LIST ON SH 88 688 88

165 LINE, TEST SEE MATERIAL LIST ON SH 89 688 89

166 HAND CHAIN HOIST 3 TON CAP COML CHISHOLN MOORE HOIST OR EQUAL, SEE NOTE 16 21/688/726/774

0167 DYNAMOMETER 2000 LB CAP COML JOHN CHATILLON & SONS OR EQUAL 688

168 DYNAMOMETER 5000 LB CAP COML JOHN CHATILLON & SONS DR EQUAL 21/688/726/774

169 HYDRAULIC JACK 10 TON CAP COML BLACKHAWK MFG CO. OR EQUAL 21/688/726/774

170 SHACKLE 3/4" STL GALV RR-C-271 21/688/726/774

171 SNATCH BLOCK, 3/8" WIRE ROPE, OBLONG EYE, UPSET SHACKLE STEEL COML BOSTON & LOCKPORT BLOCK CO OR EQUAL 688 172 MK 48 TORP LOG ADAPTER BUTTON TEST FIXTURE (TENSION TEST) CRES SEE MATERIAL LIST ON SH 90 21/774 90 173 MK 48 TORP LOG ADAPTER BUTTON TEST FIXTURE (COMP TEST) CRES ASTM A240 TY 304 21/774 91- 174 MK 48 TORP LOG ADAPTER TEST FIXTURE TEST STAND EQUIP. CRES QQ-S-763 CL 303 688/774 92 180 LOCKING PIN, 1/4" DIA X 3.1" GRIP (BLC-4-B-31-S) CRES COML BALL LOCK PIN OR EQUAL 21/774 186 LOCKING PIN, 1/2" DIA X 2" GRIP (BLC-8-R-20-S) CRES COML BALL LOCK PIN OR EQUAL 21/688/726/774

187 TEST ADAPTER, PWR LOG POLES (TENSION TEST) SEE MATERIAL LIST ON SH 93 688 93

188 TEST ADAPTER, PWR LOG POLES (COMPRESSION TEST) SEE MATERIAL LIST ON SH 94 688 94

189 PIN, QUICK RELEASE 1/2" DIA CRES MS 17990 C 828 688

C 190 TEST ADAPTER, PWR LOG POLES (TENSION TEST) SEE MATERIAL LIST ON SH 95 726 95 C191 TEST ADAPTER, PWR LOG POLES (COMPRESSION TEST) SEE MATERIAL LIST ON SH 96 726 96 193 LOCKING PIN, 3/4" DIA X 1.4" GRIP (BLC-12-B-14-S) CRES COML BALL LOCK PIN OR EQUAL 726 195 TEST ADAPTER, WEAPON POSITIONING CABLE MECHANISM SEE MATERIAL LIST ON SH 97 726 97

197 TEST ADAPTER, WEAPON EMERGENCY HANDLING CRES QQ-S-763, CL 304 688 98

198 LOCKING PIN 3/4" DIA X 2" GRIP (BLC-12-B-20-S) COML BALL LOCK PIN OR EQUAL 688

199 LOCKING PIN 1/2" DIA X 3.2" GRIP (BLC-8-B-32-S) COML BALL LOCK PIN OR EQUAL 688

+200 TEST ADAPTER, WEAPON POSITIONING CABLE MECHANISM SEE MATERIAL LIST ON SH 99 - 99

201 SNUBBING MECHANISM, PADEYE SEE MATERIAL LIST ON SH 100 21 100

202 STRONGBACK. 25" LONG, 10,500 LB CAPACITY AL ALY SEE MATERIAL LIST ON SH 101 21/774 101

203 DOLLY TRACK FIXTURE SEE MATERIAL LIST ON SH 102 21 102

204 LOCKBAR STRONGBACK STEEL SEE MATERIAL LIST ON SH 105 21 105

205 TEST ADAPTER, WEAPON POSITIONING CABLE MECHANISM STEEL SEE MATERIAL LIST ON SH 106 21/774 106 206 TEST ADAPTER, DECK SKID REMOVAL PADEYE STEEL SEE MATERIAL LIST ON SH 107 21 107

B 207 WOOD CYLINDER, 26.5" DIA WOOD SEE MATERIAL LIST ON SH 52 21 52 B

208 SECURING BAND TEST FIXTURE STEEL SEE MATERIAL LIST ON SH 108 21 108

209 21" DIA WOOD SHAPE ADAPTER WOOD SEE MATERIAL LIST ON SH 109 21 109

210 TEST ADAPTER, WEAPON POSITIONING CABLE MECHANISM STEEL SEE MATERIAL LIST ON SH 110 21/774 110

211 CABLE TEST ADAPTER SEE MATERIAL LIST ON SH 111 21 111

212 RAMMER TEST ADAPTER STEEL SEE MATERIAL LIST ON SH 112 21 112

213 BUTTON TEST ADAPTER (COMPRESSION) STEEL SEE MATERIAL LIST ON SH 113 21 113

- 214 BUTTON TEST ADAPTER (TENSION) STEEL SEE MATERIAL LIST ON SH 114 21/774 114 -

215 RAMMER TEST ADAPTER STEEL SEE MATERIAL LIST ON SH 115 21 115

216 TEST ADAPTER, DECK SKID REMOVAL CABLE STEEL SEE MATERIAL LIST ON SH 116 21 116

217 NOSEPIECE BAND TEST ADAPTERD STEEL SEE MATERIAL LIST ON SH 117 21 117

218 CABLE TEST ADAPTER STEEL SEE MATERIAL LIST ON SH 118 21/774 118

219 POST FIXTURE STEEL SEE MATERIAL LIST ON SH 119 21/774 119

220 26.5" DIA WOOD TEST SHAPE WOOD SEE MATERIAL LIST ON SH 120 21 120

A221 CLEVIS FIXTURE SEE MATERIAL LIST ON SH 124 21 124

DRAWING TITLE NAVSEA DRAWING NO.

MATERIAL LIST ( CCINT INLlED) B 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 9 OF

5032448-009-1H-TFIX

222 SPACER SEE MATERIAL LIST ON SH 122 21 122

223 TEST ADAPTER SEE MATERIAL LIST ON SH 123 688 123

224 SHACKLE 1- 1/4" GALV STL RR-C-271D. TYPE IVA. GR B. CL 2 688 541

0225 FISH PLATE STEEL SEE MATERIAL LIST ON SH 121 21 121

226 LOCKING PIN. 3/8" DIA X 1. 2" GRIP (BLC-6-B-12-S) CRES COML BALL LOCK PIN OR EQUAL 21 227 LOCKING PIN. 5/8" DIA X 3.6" GRIP (BLC-10-B-36-S) CRES COML BALL LOCK PIN OR EQUAL 21 228 ADAPTER. CRADLE LASHING BAND TEST FIXTURE SEE MATERIAL LIST ON SH 126 774 126

229 STRONGBACK. RAMMER TEST SEE MATERIAL LIST ON SH 127 774 127

230 PUMP PLATE. PADEYE TEST ASSY SEE MATERIAL LIST ON SH 128 774 128

231 CRADLE LASHING BANDS HALF RING WELDMENT SEE MATERIAL LIST ON SH 129 774 129-

232 PADEYE TEST UPPER ASSEMBLY SEE MATERIAL LIST ON SH 132 774 132

233 PADEYE TEST LOWER ASSEMBLY SEE MATERIAL LIST ON SH 135 774 135

234 CONNECTING LINK ASSEMBLY, LIFTING SEE MATERIAL LIST ON SH 138 774 138

235 CONNECTING LINK ASSEMBLY, POSITIONING SEE MATERIAL LIST ON SH 139 774 139

236 CONNECTING LINK ASSEMBLY, LONG TEMPORARY SEE MATERIAL LIST ON SH 140 774 140

237 CONNECTING LINK ASSEMBLY, SHORT TEMPORARY SEE MATERIAL LIST ON SH 141 774 141

C 238 CONNECTING LINK ASSEMBLY, EMERGENCY SEE MATERIAL LIST ON SH 142 774 142 C239 NOSEPIECE TEST STAND. LOWER ADAPTER SEE MATERIAL LIST ON SH 144 774 144

240 NOSEPIECE TEST STAND. UPPER ADAPTER SEE MATERIAL LIST ON SH 148 774 148

242 RAMMER. TEST FIXTURE SEE MATERIAL LIST ON SH 152 774 152

243 BRIDLE PULL. TEST FIXTURE SEE MATERIAL LIST ON SH 154 774 154

244 CHAIN HOIST. TEST FIXTURE SEE MATERIAL LIST ON SH 155 774 155

245 RESTRAINING STRAP. TEST FIXTURE SEE MATERIAL LIST ON SH 157 774 157

+246 WEAPON RESTRAINING POST. TEST FIXTURE SEE MATERIAL LIST ON SH 158 774 158

247 CRADLE RESTRAINING POST. TEST FIXTURE SEE MATERIAL LIST ON SH 159 774 159

248 TEMPORARY LASHING STRAP. TEST FIXTURE SEE MATERIAL LIST ON SH 160 774 160

249 TEMPORARY LASHING STRAP. TEST ADAPTER SEE MATERIAL LIST ON SH 161 774 161

250 PREVENTER LASHING STRAP. TEST ADAPTER SEE MATERIAL LIST ON SH 162 774 162

251 BUTTON TEST ADAPTER, TEST STAND EQUIPMENT SEE MATERIAL LIST ON SH 163 21 163

B B

A A

DRAWING TITLE NAVSEA DRAWING NO.

MATERIAL LIST ( CCINT INLlED) B 53711 I 709 I 5032448 IH

SCALE: NIA ISHEET 10 OF

5032448-010-1H-TFIX

ASSY PC DESCRIPTION QUANTITY MATERIAL REMARKS SHEETNO. NO. ASSY UNIT

505 - TEST ASSEMBLY 1 - APPLICABLE TO 21 500

6 WOOD CYLINDER, 19" 0 IA - 1 WOOD SEE MATERIAL LIST ON SH 52

40 ROPE, WIRE . . 062 DIA. LG AS REQD - 1 CRES MIL-W-83420. TY I, 7 X 7 COMP A

0 41 SLEEVE, SWAGING .062 DIA. - 4 CRES MS 51844-1 0

80 YOKE - 1 STEEL SEE MATERIAL LIST ON SH 61

81 SHAFT - 1 STEEL ASTM A108 G 10200

82 WASHER, FLAT, 2 0.0. X1.38 1.0. X .165 THK - 2 STEEL FF-W-92. TY A, GR I, CL A

83 PIN LOCK. .125 DIA X 3.38 LG - 2 SPR STL MIL-R-52243

506 TEST ASSEMBLY 1 - APPLICABLE TO 21/688/726/774 500-

7 WOOD CYLINDER, 21" DIA - 1 WOOD SEE MATERIAL LIST ON SH 52

40 ROPE, WIRE . . 062 DIA. LG AS REQD - 1 CRES MIL-W-83420. TY I, 7 X 7 COMP A

41 SLEEVE, SWAGING .062 DIA. - 4 CRES MS 51844-1

80 YOKE - 1 STEEL SEE MATERIAL LIST ON SH 61

81 SHAFT - 1 STEEL ASTM A108 G 10200

82 WASHER, FLAT. 2 0.0. X1.38 1.0. X .165 THK - 2 STEEL FF-W-92. TY A, GR I . CL A

C 83 PIN LOCK. .125 DIA X 3.38 LG - 2 SPR STL MIL-R-52243 C

518 LASHING STRAP TEST ASSEMBLY 1 - APPLICABLE TO 774 501

131 STRONGBACK, LASHING STRAP TEST ASSEMBLY - 1 AL ALY SEE MATERIAL LIST ClN SH 75

132 PIVOT, LASHING STRAP TEST ASSEMBLY - 2 STEEL MIL-S-22698. GR B

133 NUT, LASHING STRAP TEST ASSEMBLY - 2 STEEL MIL-S-22698. GR A

134 PIN, SPRING, .250 DIA X 3 LG - 4 CRES MS 171666

+ 135 PIN, SPRING, . 188 0 IA X 2 LG - 2 CRES MS 171602 +136 SCREW, LASHING STRAP TEST ASSEMBLY - 2 STEEL ASTM A108 G 10200 228 ADAPTER, TEST FIXTURE CRADLE LASHING BAND - 2 - SEE MATERIAL LIST ON SHEET 126

519 LASHING STRAP TEST ASSEMBLY 1 - APPLICABLE TO 688/726 501

131 STRONGBACK, LASHING STRAP TEST ASSEMBLY - 1 AL ALY SEE MATERIAL LIST ON SH 75

132 PIVOT, LASHING STRAP TEST ASSEMBLY - 2 STEEL MIL-S-22698. GR B

B 133 NUT, LASHING STRAP TEST ASSEMBLY - 2 STEEL MIL-S-22698. GR A B

134 PIN, SPRING, .250 DIA X 3 LG - 4 CRES MS 171666

135 PIN, SPRING, . 188 0 IA X 2 LG - 2 CRES MS 171602

136 SCREW, LASHING STRAP TEST ASSEMBLY - 2 STEEL ASTM A108 G 10200

148 ADAPTER - 2 STEEL MIL-S-22698. GR DH-36

522 TORPEDO TEST WEIGHT 1 - APPLICABLE TO 726, ALT TEST WEIGHT ASSY 561 502

525 - NOSE PIECE TEST ARRANGEMENT 1 - APPLICABLE TO 21/726/774 509

100 19" DIA WOOD AND TEST SHAPE & FITTINGS 1 - WOOD SEE MATERIAL LIST ON SH 63, APPLICABLE TO 21 ONLY

101 21" DIA MK WOOD TEST SHAPE AND FITTINGS 1 - WOOD SEE MATERIAL LIST ON SH 64

102 TEST SHAPE, 21" DIA WOOD BELLY BAND 1 - WOCID SEE MATERIAL LIST ClN SH 65

104 TEST STAND NOSE PIECE - 1 STEEL SEE MATERIAL LIST ON SH 66

105 STRONGBACK - 1 STEEL SEE MATERIAL LIST ON SH 69

A 220 26.5" DIA WOOD TEST SHAPE 1 - WOOD SEE MATERIAL LIST ON SH 120 A

DRAWING TITLE NAVSEA DRAWING NO.

ASSEMBLY LIST B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 11 OF

5032448-011-1H-TFIX

535 - HAND LOADING POLE TEST ARRANGEMENT 1 - APPLICABLE TO 688 510

157 TEST STAND - 1 SEE MATERIAL LIST ON SH 80

158 REVERSIBLE SLIDING HEAD, TEST STAND EQUIPMENT - 1 SEE MATERIAL LIST ON SH 82

0 159 BUTTON TEST ADAPTER, TEST STAND EQIPMENT - 1 CRES QQ-S-763 0

163 LINE, TEST - 1 SEE MATERIAL LIST ON SH 87

164 SLING, TEST - 1 SEE MATERIAL LIST ON SH 88

165 LINE, TEST - 1 SEE MATERIAL LIST ON SH 89

166 HAND CHAIN HOIST 3 TON CAP - 1 COML CHISHOLN MOORE HOIST DIV OR EQUAL, SEE NOTE 16

167 DYNAMOMETER 2000 LB CAP - 1 COML JOHN CHATILLDN & SONS OR EDUAL

170 SHACKLE 3/4 H - 4 STL GALV RR-C-271-

171 SNATCH BLOCK, 3/8 H WIRE ROPE, OBLONG EYE, UPSET SHACKLE - 1 STEEL COML BOSTON & LOCKPORT BLOCK CO OR EQUAL 186 LOCKING PIN, 1/2 H DIA, 2 H GRIP (BLC-8-R-20-S) - 2 CRES COML BALL LOCK PIN OR EQUAL

547 - POWER LOADING POLE TEST ARRANGEMENT 1 - APPLICABLE TO 774 511

157 TEST STAND - 1 SEE MATERIAL LIST ON SH 80

158 REVERSIBLE SLIDING HEAD, TEST STAND EQUIPMENT - 1 SEE MATERIAL LIST ON SH 82

C 162 TORPEDO BELLMOUTH - 1 SEE MATERIAL LIST ON SH 86 C166 HAND CHAIN HOIST 3 TON CAP - 1 COML CHISHOLN MOORE HOIST DIV OR EDUAL, SEE NOTE 16

168 DYNAMOMETER 5000 LB CAP - 1 COML JOHN CHATILLON & SONS OR EQUAL

169 HYDRAULIC JACK 10 TON CAP - 1 COML BLACKHAWK MFG CO. OR EQUAL

170 SHACKLE 3/4 H - 4 STL GALV RR-C-271

172 MK 48 TORP LOG ADAPTER BUTTON TEST FIXTURE (TENSION TEST) - 1 SEE MATERIAL LIST ON SH 90 173 MK 48 TORP LOG ADAPTER BUTTON TEST FIXTURE (COMP TEST) - 1 CRES ASTM A240 TY 304

+ 174 MK 48 TORP LOG ADAPTER TEST FIXTURE, TEST STAND EQIUP. - 1 CRES QQ-S-763 CL 303 +180 LOCK ING P I1'-.J , 1/4 H DIA X 3. 1H GRIP (BLC-4-B-31-S) - 1 CRES COML BALL LOCK PIN OR EQUAL 186 LOCKING PIN, 1/2 H DIA X 2 H GRIP (BLC-8-R-20-S) - 2 CRES COML BALL LOCK PIN OR EQUAL

548 - POWER LOADING POLE TEST ARRANGEMENT 1 - APPLICABLE TO 21/774 511

157 TEST STAND - 1 SEE MATERIAL LIST ON SH 80

158 REVERSIBLE SLIDING HEAD, TEST STAND EQUIPMENT - 1 SEE MATERIAL LIST ON SH 82

B 159 BUTTON TEST ADAPTER, TEST STAND EQIPMENT - 1 CRES QQ-S-763 B

166 HAND CHAIN HOIST 3 TON CAP - 1 COML CHISHOLN MOORE HOIST DIV OR EQUAL, SEE NOTE 16

168 DYNAMOMETER 5000 LB CAP - 1 COML JOHN CHATILLDN & SONS OR EQUAL

169 HYDRAULIC JACK 10 TON CAP - 1 COML BLACKHAWK MFG CO. OR EQUAL

170 SHACKLE 3/4 H - 4 STL GALV RR-C-271

172 MK 48 TORP LOG ADAPTER BUTTON TEST FIXTURE (TENSION TEST) - 1 SEE MATERIAL LIST ON SH 90 173 MK 48 TORP LOG ADAPTER BUTTON TEST FIXTURE (COMP TEST) - 1 CRES ASTM A240 TY 304

- 180 LOCKING PIN, 1/4 H DIA X 3.1 H GRIP (BLC-4-B-31-S) - 1 CRES COML BALL LOCK PIN OR EQUAL -

186 LOCKING PIN, 1/2 H DIA X 2 H GRIP (BLC-8-R-20-S) - 2 CRES COML BALL LOCK PIN OR EQUAL

A A

DRAWING TITLE NAVSEA DRAWING NO.

ASSEMBLY LIST (CONTINUED) B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 12 OF

5032448-012-1H-TFIX

549 - POSITIONING MECHANISM TEST ARRANGEMENT 1 - APPLICABLE TO 726 512

157 TEST STAND - 1 SEE MATERIAL LIST ON SH 80

158 REVERSIBLE SLIDING HEAD, TEST STAND EQUIPMENT - 1 SEE MATERIAL LIST ON SH 82

0 166 HAND CHAIN HOIST 3 TON CAP - 1 COML JOHN CHATILLON & SONS OR EQUAL, SEE NOTE 16 0

168 DYNAMOMETER 5000 LB CAP - 1 COML JOHN CHATILLON & SONS OR EQUAL

170 SHACKLE 3/4 H - 4 STL GALV RR-C-271

186 LOCKING PIN, 1/2 H DIA X 2 H GRIP (BLC-8-R-20-S) - 2 CRES COML BALL LOCK PIN OR EQUAL 193 LOCKING PIN, 3/4 H DIA X 1.4 H GRIP (BLC-12-B-14-S) - 1 CRES COML BALL LOCK PIN OR EQUAL 195 TEST ADAPTER, WEAPON POSITIONING CABLE MECHANISM - 1 SEE MATERIAL LIST ON SH 97

550 POWER LOADING POLE TEST ARRANGEMENT 1 APPLICABLE TO 688 511

157 TEST STAND - 1 SEE MATERIAL LIST ON SH 80

158 REVERSIBLE SLIDING HEAD, TEST STAND EQUIPMENT - 1 SEE MATERIAL LIST ON SH 82

159 BUTTON TEST ADAPTER, TEST STAND EQUIPMENT - 1 CRES QQ-S-763

166 HAND CHAIN HOIST 3 TON CAP - 1 COML CHISHOLN MOORE HOIST DIV OR EQUAL, SEE NOTE 16

168 DYNAMOMETER 5000 LB CAP - 1 COML JOHN CHATILLON & SONS OR EQUAL

C 169 HYDRAULIC JACK 10 TON CAP - 1 COML BLACKHAWK MFG CO. OR EQUAL C170 SHACKLE 3/4 H - 4 STL GALV RR-C-271 174 MK 48 TORP LOG ADAPTER TEST FIXTURE, TEST STAND EQUIP. - 1 CRES QQ-S-763 CL 303 186 LOCKING PIN, 1/2 H DIA X 2 H GRIP (BLC-8-R-20-S) - 2 CRES COML BALL LOCK PIN OR EQUAL

187 TEST ADAPTER, PWR LOG POLES (TENSION TEST) - 1 SEE MATERIAL LIST ON SH 93

188 TEST ADAPTER, PWR LOG POLES (COMPRESSION TEST) - 1 SEE MATERIAL LIST ON SH 94

189 PIN, QUICK RELEASE 1/2 H DIA - 2 CRES MS 17990 C 828

+ +551 - POWER LOADING POLE TEST ARRANGEMENT 1 - APPLICABLE TO 726 511

157 TEST STAND - 1 SEE MATERIAL LIST ON SH 80

158 REVERSIBLE SLIDING HEAD, TEST STAND EQUIPMENT - 1 SEE MATERIAL LIST ON SH 82

159 BUTTON TEST ADAPTER, TEST STAND EQUIPMENT - 1 CRES QQ-S-763

166 HAND CHAIN HOIST 3 TON CAP - 1 COML CHISHOLN MOORE HOIST DIV OR EQUAL, SEE NOTE 16

168 DYNAMOMETER 5000 LB CAP - 1 COML JOHN CHATILLON & SONS OR EQUAL

B 169 HYDRAULIC JACK 10 TON CAP - 1 COML BLACKHAWK MFG CO. OR EQUAL B

170 SHACKLE 3/4 H - 4 STL GALV RR-C-271

186 LOCKING PIN, 1/2H DIA X 2 H GRIP (BLC-8-R-20-S) - 2 CRES COML BALL LOCK PIN OR EQUAL

190 TEST ADAPTER, PWR LOG POLES (TENSION TEST) - 1 SEE MATERIAL LIST ON SH 95

191 TEST ADAPTER, PWR LOG POLES (COMPRESSION TEST) - 1 SEE MATERIAL LIST ON SH 96

552 TEST WEIGHT, 4600 LB RATED LOAD 1 APPLICABLE TO 21/688/774 513- - - -SEE MATERIAL LIST ON SH 513

A A

DRAWING TITLE NAVSEA DRAWING NO.

ASSEMBLY LIST (CONTINUED) B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 13 OF

5032448-013-1H-TFIX

553 - WEAPON EMERGENCY HDLG TEST ARRANGEMENT 1 - APPLICABLE TO 688 521

157 TEST STAND - 1 SEE MATERIAL LIST ON SH 80

158 REVERSIBLE SLIDING HEAD, TEST STAND EQUIPMENT - 1 SEE MATERIAL LIST ON SH 82

0 165 LINE, TEST - 1 SEE MATERIAL LIST ON SH 89 0

166 HAND CHAIN HOIST 3 TON CAP - 1 COML CHISHOLN MOORE HOIST DIV OR EQUAL, SEE NOTE 16

167 DYNAMOMETER 2000 LB CAP - 1 COML JOHN CHATILLON & SONS OR EQUAL

170 SHACKLE 3/4" - 4 STL GALV RR-C-271

186 LOCKING PIN, 1/2" DIA X 2" GRIP (BLC-8-R-20-S) - 2 CRES COML BALL LOCK PIN OR EQUAL

197 TEST ADAPTER, WEAPON EMERGENCY HANDLING - 1 CRES QQ-S-763, CL 304

198 LOCKING PIN, 3/4" DIA X 2" GRIP (BLC-12-B-20-S) - 1 COML BALL LOCK PIN OR EQUAL- 199 LOCKING PIN, 1/2" DIA X 3.2" GRIP (BLC-8-B-32-S) - 1 COML BALL LOCK PIN OR EQUAL

554 - TEST WEIGHT, MK 67, 1400 LB RATED LOAD 1 - CRES APPLICABLE TO 688 522SEE MATERIAL LIST ON SH 522

555 - VLS BALLAST CAN TEST FIXTURE 1 - STEEL APPLICABLE TO 688/774 524

C SEE MATERIAL LIST ON SH 524 C

558 - SECURING BAND TEST ASSEMBLY 1 - APPLICABLE TO 21 529

208 SECURING BAND TEST FIXTURE - 1 STEEL SEE MATERIAL LIST ON SH 108

209 21" DIA WOOD SHAPE ADAPTER - 1 WOOD SEE MATERIAL LIST ON SH 109

558-1 SCREW, CAP, HEX HEAD, . 25-20UNC-2A X 2.0 LG - 2 STEEL

558-2 NUT, HEX, . 25-20UNC-2B - 2 STEEL

+ +559 - TEST ASSEMBLY 1 - APPLICABLE TO 21 500

40 ROPE, WIRE, .062 DIA. LG AS REQD - 1 CRES MIL-W-83420, TY I, 7 X 7 COMP A

41 SLEEVE, SWAGING .062 DIA. - 4 CRES MS 51844-1

80 YOKE - 1 STEEL SEE MATERIAL LIST ON SH 61

81 SHAFT - 1 STEEL ASTM A108 G 10200

82 WASHER, FLAT, 2 0.0. X 1.38 1.0. X .165 THK - 2 STEEL FF-W-92, TY A, GR 1. CL A

B 83 PIN LOCK, . 125 0 IA X 3. 38 LG - 2 SPR STL MIL-R-52243 B

207 WOOD CYLINDER, 26.5" DIA - 1 WOOD SEE MATERIAL LIST ON SH 52

560 - TEST WEIGHT, 7800 LB RATED LOAD 1 - APPLICABLE TO 21 530SEE MATERIAL LIST ON SH 530

561 - TORPEDO TEST WEIGHT, ALTERNATE 1 - APPLICABLE TO 726 536- SEE MATERIAL LIST ON SH 536 -

562 - SPACER ASSEMBLY 1 - APPLICABLE TO 21 540

159 BUTTON TEST ADAPTER, TEST STAND EQUIPMENT - 1 CRES QQ-S-763

222 SPACER 1 SEE MATERIAL LIST ON SH 122

A A

DRAWING TITLE NAVSEA DRAWING NO.

ASSEMBLY LIST (CONTINUED) B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 14 OF

5032448-014-1H-TFIX

563 - TEST ADAPTER 1 - APPLICABLE TO 6B8 541

223 TEST ADAPTER - 1 SEE MATERIAL LIST ON SH 123

224 SHACKLE. 1-1I4 H - 1 GALV STL RR-C-271D. TYPE IVA. GR B. CL2

0 0

564 - CLEVIS FIXTURE 1 - APPLICABLE TO 21 542

221 CLEVIS FIXTURE - 1 SEE MATERIAL LIST ON SH 124

226 LOCKING PIN. 3/8 H DIA X 3.6 H GRIP (BLC-I0-B-36-S) - 1 CRES COM. BALL LOCK PIN OR EQUAL

565 - CRADLE LASHING BANDS TEST WSHS 1 - APPLICABLE TO 774. 543SEE MATERIAL LIST ON SH 543

566 - PAD EYE, CRADLE LIFT TEST ASSEMBLY 1 - APPLICABLE TO 774. 545SEE MATERIAL LIST ON SH 545

567 - PAD EYE, POSITIONING TEST ASSEMBLY 1 - APPLICABLE TO 774. 546SEE MATERIAL LIST ON SH 546

C CAPPLICABLE TO 774.568 - PAD EYE, TEMPORARY TEST ASSEMBLY 1 - SEE MATERIAL LIST ON SH 547 547

569 - PAD EYE, EMERGENCY TEST ASSEMBLY 1 - APPLICABLE TO 774. 548SEE MATERIAL LIST ON SH 548

+ +570 - SSN 774 CLASS WEAPONS CRADLE SHIPPING TEST WEIGHT 1 - APPLICABLE TO 774. 549SEE MATERIAL LIST ON SH 549

B B

A A

DRAWING TITLE NAVSEA DRAWING NO.

ASSEMBLY LIST (CONTINUED) B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 15 OF

5032448-015-1H-TFIX

0 0 c c

SHEETS 16-49 INTENTIONALLY LEFT BLANK

+ FOR ADDITIONAL INFORMATION +

B B

A A

DRAWING TITLE NAVSEA DRAWING NO.

BLAf\IK SHEET B I 53711 I 709 I 5032448 IH

SCALE: N/A ISHEET 16 OF

5032448-016-1H-TFIX

4.25

___----, 1- 1 19 . 00

.75

SCALE = 1/4

DETAIL 50-B

DETAIL 50-B---- ~/

1-- 1. 00

IJ1.OO

1. 44

--------.----:;~--< TYP

1/4

2X 3.00

1- 2\--------~~~~7)....t-------__(

SYMM ABOUT It.

12.00~

13X ¢ 1. 25 THRU

[IJ¢ .0601

STENCIL BOTH SIDES------,

IN 1 IN. BLACK CHARACTERS

SEE GENERAL NOTE 9

MATERIAL LIST FOR ONE PC 1

PC NO OTY DESCRIPTION MAT'L MAT'L SPEC REMARKS

1- 1 1 PL .75 X 19.25 X 75.3 AL ALY OO-A-250/7 H 32 5086

1-2 2 PL .75 X 2.5 X 75.3 AL ALY OO-A-250/7 H 32 5086

0 1-3 2 PL .75 X 2.5 X 73.3 AL ALY OO-A-250/7 H 32 5086

1-4 2 PL .25 X 12 X 4.4 AL ALY QO-A-250/7 H 32 5086

~---------------------------------72. 00 -----------------------------------.t

5. 75 --+_--1~

A~ o STRONGBACK

SCALE = 1/8

SECTION 50-A

A A

DRAWING TITLE

STROI\JGBACK

72# LONG, 12,500 LB CAPACITY

SCALE: N/A SHEET 50 OF

5032448-050-1H-TFIX

I I • I

MATERIAL LIST FOR ONE PC 3

PC NO I OTY I DESCRIPTION I MAT'L I MAT'L SPEC I REMARKS NOTES:

3 1 I 1 I BAR ¢ 1.BB X 10.38 I STEEL I MIL -S-22698. GR B I 1. DO NOT PAINT.

0 0 10.38

125) R .06~

12~/

I "" /'

~FULL RADIUS

I~¢ 1.88 - -+ (I

C ~

"-- C

12~/ 2X ¢ .56

1.50----.j5.50

Rt·::

-¢ 1.12

4XR .50

d2X .50 B I B

I I I I f- I - - - I" - - - I i -:I : I I

I I

~275 ~I

0 TORPEDO RAtJlMER TEST FIXTURE

SCALE = 1/1

DRAWING TITLE NAVSEA DRAWING NO.

TEST FIXTURE, TCiRPEDO RAMMER B 53711 I 709 1 5032448 TH

SCALE: N/A ISHEET 51 OF

+ I

5032448-051-1H-TFIX

I • I

MATERIAL LIST FOR ONE PC 6, PC 7, AND PC 207

PC NO OTY DESCRIPTION MAT'L MAT'L SPEC REMARKS

6 1 19" DIA CYLINDER ASSY - -

6-1 1 LAMINATED WOOD 19" DIA MAPLE GEN NOTE 4 ALT: OAK OR FIR

0 6-2 1 1 1/4 IPS, SCH 80, X 12 WW-P-404 CL A 53 AS BLACK 0

7 1 21" DIA CYLINDER ASSY - -

7-1 1 LAMINATED WOOD 21" DIA MAPLE GEN NOTE 4 ALT: OAK OR FIR

7-2 1 1 1/4 IPS, SCH 80, X 12 WW-P-404 CL A 53 AS BLACK

207 1 26.5" DIA CYLINDER ASSY - -

207-1 1 LAMINATED WOOD 26.5" DIA MAPLE GEN NOTE 4 ALT: OAK OR FIR

- 207-2 1 1 1/4 IPS, SCH 80, X 12 WW-P-404 CL A 53 AS BLACK -

c:=:::

~~ 0

) )\ 1/

C ~

~ C

PRESS FIT

I\~

\~FOR PIPE ~ ~V(¢ 1.660)

------::. I/f~ ~11ft-- ¢. 19.00 FOR PC 6V ¢. 21.00 FOR PC 7

+ 6-2J

¢ 26.50 FOR PC 207

0 1\\\1~ r-::-I\~

~/f:~ jn~ ~~

7-2

207-2 1 v/ ) I\~WOOD CYLINDER

~V VB

6-1/

J ~ B'--:::::: -

7-1 207-1

~12.00::?g~ A A

DRAWING TITLE NAVSEA DRAWING NO.

WOCID CYL II\JDERS , B I 53711 I 709 I 5032448 IH19 INCH, 21 II\JCH & 26. 5 INCH SCALE: N/A ISHEET 52 OF

I + I

5032448-052-1H-TFIX

MATERIAL LIST FOR ONE PC 8

PC NO OTY DESCRIPTION MAT'L MAT'L SPEC REMARKS

8-1 1 PL 1/2 X 3 X 1 3/4 STEEL MIL-S-22698 SEE GENERAL NOTES 6. 7. 13

8-2 1 W 4 X 13 X 22 7/8 STEEL MIL-S-22698 SEE GENERAL NOTES 6. 7. 13

o ~---------------------22 7/8---------------------~

1/2 c

FULL RADIUS

¢ 3/4

~---f---1 1/2

~--3----I~

2X 1/8 X 45°

CHAMFER

5/16

R 3/4

I I I I I I I I

====I==================== ====================I====I '"7--""'--1-----"-----..::::' I I I I I I I

~---------11 7/16---------~

R 11 13/16 c

~--~,--2 TYP

~ RAMMER TEST STRONGBACK

SCALE = 1/2

DRAWING TITLE

STRONGBACK, RAMMER TEST B

SCALE: N/A SHEET 53 OF

5032448-053-1H-TFIX

PC NO

14-1

DESCRIPTION

PL 3/4 X 5 1/2 X 4 1/8

REMARKS

SEE GENERAL NOTES 6. 7. 13

NOTES:

1. ATTACH PAoEYE TO SUITABLE SURFACE IN SHOP.

2. ASSURE THAT BOTH SIDES OF THE PLATE ARE

WELDED FOR THE FULL 5 1/2 INCHES OF LENGTH.

3. MIN WELD SIZE .50 FILLET o

R 1 7/8

¢ 1 1/4 2X 1/16 X 45°

CHAMFER

2 1/4

1......---..-5 1/2--------.~1

I-I I I I I

-----I+__ ---++--

I I I J---l

~3/4 c

~ TEST PADEYE

SCALE = 1/1

SHEET 54 OF

SCALE: NIA

r-------------:=-:-:-:-::-:-::--:::-:::-=---------,-------;-;-;-;-;=-=--=-=-:-;-~___:_:_::_---------1A

DRAWING TITLE

PADEYE, TEST

25.000 LB CAPACITY

5032448-054-1H-TFIX

20-1 20-2 20-3

OTY DESCRIPTION

1 PL 1. 25 X 4. 0 . X 4. 0

1 PL 1/2 X 3.0 X 9.0

2 PL 1/2 X 3. 0 X 4. 25

MATERIAL LIST FOR ONE PC 20

MAT'L MAT'L SPEC

STEEL MIL-S-22698

REMARKS

o c

9.00 7.00

TYP

2.00

3.50

TYP

¢ 1. 50-12UNF-2B

1. 25 --+~~,)oj.

1. 00--~~oi'-

SECTION 55-A

4X ¢ .75

~----+---+-------+--4. 00 SOUARE

,----'-.--+-----,-__L..-_----L.~__-.u... ____._+_.______, [ . 50 TYP

4.25

__l L.A

G TORPEDO RAMMER TEST FIXTURE

SCALE = 1/2

DRAWING TITLE

TEST FIXTURE, TORPEDO RAMMER B

SCALE: N/A SHEET 55 OF

5032448-055-1H-TFIX

I •MATERIAL LIST FOR ONE PC 24

PC NO OTY DESCRIPTION MAT'L MAT'L SPEC REMARKS NOTES:

24-1 1 PL 3/4 X 6.0 X 13.0 STEEL MIL-S-22698, GR B GENERAL NOTES 6, 7, 13 1.

24-2 1 PL 1/2 X 25.0 X 4.25 STEEL MIL-S-22698, GR B GENERAL NOTES 6, 7, 13

0 24-3 1 PL 1/2 X 30.0 X 3.75 STEEL MIL-S-22698, GR B GENERAL NOTES 6, 7, 13 2.

24-4 1 BAR 4.0 X 14.0 X 1.25 STEEL MIL-S-22698, GR B GENERAL NOTES 6, 7, 13 3.

AND PC 19 OF

4862607

,rPC5

DWG.

q =Ir------""--~-----..O~0---..J=~- I'----~

MAX CAPACITY 3500#

UNLESS OTHERWISE SPECIFIED, ALL

DIMENSIONS ARE IN INCHES.

BREAK ALL SHARP CORNERS TO .05 RADIUS.

SECURE RAMMER TEST FIXTURE TO PORT AND

STARBOARD PIVOT TRAY IN THE SAME MANNER

THAT THE EMERGENCY PIVOT TRAY BLOCK IS

INSTALLED

CUT PC 24-2 AND PC 24-3 TO FIT

AROUND PC 24-4 AND PC 24-1.

o c

TEST SLING

BALL-LOCK PIN PC 17

OF DWG 4862607

RAMMER TEST FIXTURE

~,-J-- ~PIVOT TRAY

DRAWING TITLE

"T---- - - __...J

--.J

@ RAtvltvlER TEST FIXTURE SHOWN

8 STARBOARD

§ PORT

SCALE = 1/4

TEST FIXTURE, RAMMER

NAVSEA DRAWING NO.

B I 53711 I 709 I 5032448

SCALE: NI A ISHEET 56 OF

5032448-056-1H-TFIX

STBD RAMMER TEST FIXTURE

FOR DIMENSIONS SEE PORT

RAMMER TEST FIXTURE

MIRROR IMAGE

-8-

15.12

4X ¢ .531 THRU

[I] ¢. 010 [I[[[g

FINAL

ROOT & FINAL

LAYERMT

( .50)

SEE DETAIL 58-0

FOR DIMENSIONS

~------~----I3 . 450

2X . 750 f-+----.-t

.75 X 45° CHAMFER

2X 2.500

SEE DETAIL 58-C

FOR DIMENSIONS

c o

3. 25 -----i04-- ~-----12. 75----~

-C

8 PORT RAMMER TEST FIXTURE

SCALE = 1/4 A

DRAWING TITLE

RAMMER TEST FIXTURE

DETAILS

SCALE: N/A SHEET 57 OF

5032448-057-1H-TFIX

SEE NOTE 4

SEE DETAIL

58-8

1.25-~

(7.62)~

11113

SCALE = 1/4

VIEW 58-A

~-5.87~

6.00

( .21 ) -A-

SCALE = 1/2

DETAIL 58-8

2X .5o~1

7.12

( 1 .30)

( 1 .54)

7.12

~ DETAIL 58-0

SCALE = 1/4

~------16.48-----~

~ 5.68-----1

~-------19.23------f f-- 6 78------..t c o

8 DETAIL 58-[

SCALE = 1/4 DRAWING TITLE

RAMMER TEST FIXTURE

DETAILS (CONTINUED) o B

SCALE: N/A SHEET 58 OF

5032448-058-1H-TFIX

I I

PC NO I OTY I DESCRIPTION

25 - 1 I 1 I BAR ¢ 1. 68 X 2. 88 LG

MATERIAL LIST FOR ONE PC 25

I MAT'L MAT'L SPEC

I STEEL MIL-S-22698. GR B

I I

REMARKS

X ¢ 1. 36 CHAMFER

\¢ .625 THRU

~ /45" Tr-----"'~,~---------y--c

¢ 1.68

SR .568

--+--- 1° I~tv'

- ------jf-- - +---- - -t-+--

.25-----joooI....-.t~

~--1. 00 --....-j

¢ 1.36 1.50-12L1NF-2A

~------ 1. 94---------1~

~----------2.88-----------l~

G RAMMER TEST FIXTURE ADAPTER

SCALE = 2/1

DRAWING TITLE

ADAPTER, RAMMER TEST FIXTURE

NAVSEA DRAWING NO.

B I 53711 I 709 I 5032448 I H

SCALE: N/ A ISHEET 59 OF

5032448-059-1H-TFIX

I •MATERIAL LIST FOR ONE PC 26

BOLT, SHOULDER-SOCKET HD, ALY NASM 51975 70

26-1 1 HEX. . 750-10UNC-3A STEEL

0 SPECIAL BUSHING. STL BAR, HR ASTM A827 HOT ROLLED26-2 2 ¢ 1. 63 XI. 50 LG STEEL (SPECIAL OUALITY)

ANCHOR SHACKLE LESS PIN.

ALLOY RR-C-271, TYP 4A. CL I. MIDLAND FORGE DIVI

26-3 1 IN DIAMETER. NATL STOCK NO. COLUMBUS MCKINNON

9Z-4030-00-369-3750 STEEL GRADE B PRODUCT CODE M354A

26-4 1

WASHER. FLAT-METAL. ROUND

CRES NASM 15795-823GENERAL PURPOSE

26-5 1 NUT. PLAIN. HEXAGON (JAM) STEEL MS 35691-57

.750-10UNC-2B

NOTES:

BUSHING (PC 26-2) IS INSTALLED ONTO

SHACKLE (PC 26-3) FROM THE OUTER SURFACE

OF SHACKLE .

I---

. 9980 +. 0000 -.0020

8 SHACKLE

PART NO. 9Z-4030-00-369-3750

SCALE = 1/4

~4.000 ±.005--~~~_·875 0.845 r--f---- ---, --t-----.--tmf--------------'

0·182-j~8 BOLT ¢

(NON-STOCK ITEM)

SCALE = 1/2

(¢ 1.219 MAX) THRU

t-- t--

I-- r--t-- t--

'----' 1'---" ~~-(1-11/16 ±1/16)

SHACKLE

PC 26-3

WASHER

PC 26-4

8 SPEC I AL BUSH I NG

SCALE = 1/2

BOLT

PC 26-1

NAVSEA DRAWING NO.

B I 53711 I 709 I 5032448

SCALE: N1A ISHEET 60 OF

SAFE WORKING LOAD 24,000 LB

SCALE = 1/4

SPECIAL SHACKLE ASSEMBLY

SPECIAL BUSHING.

PC 26-2,

2 PLACES

(SEE NOTE 1)

I+

¢ 1.051::8b8 THRU

[I]¢.010@]

DRAWING TITLE

SPECIAL SHACKLE

SHIPPING TRAY HYDRAULIC CYLINDER

,-1. 125:: 8b§ [gJ

--.L I .0051 0 I

. 032 ±. 0 10 X 45 0

CHAMFER

¢ 1.63 ±. 05

J__ n=-=-=--~

+ 010 I 1. 000 +. 000- :000 ------.j~_ _r__- - . 010.062

5032448 060 IH TFIX

MATERIAL LIST FOR ONE PC 80

80-1 1 PL .75 X 9.5 X 12.5 MS MIL-S-22698. GR AH36

A o c

5032448-061-1H-TFIX

SHEET 61 OF

SCALE = 1/1

SECTION 51-A

9.00

SCALE: N/A

6.75,- 3.38

21.50

YOKE

DRAWING TITLE

~1250~~.50

R 1.50 HAND GRIND

24.50

MS MIL-S-22698. GR AH36

¢ 1.38 THRU

45° V

1.13-~

R . 75 TYP --+----'

HAND GRIND

2 BAR .50 X 3 X 24.580-2

B 2X ¢

THRU

~1.00±.25 r •1. 50

3.00 51 A

A 8 YOKE

SCALE = 1/4

MATERIAL LIST FOR ONE PC 81

PC NO I OTY I DESCRIPTION I MAT'L I MAT'L SPEC I REMARKS NOTES:

81 1 I 1 I BAR ¢ 1.25 X 15.25 I STEEL I ASTM Al 08 G 10200 I 1. DO NOT PAINT.

0 0

15.25 C C

.75 TYP---- --

1 1¢ 1.250 - - - - - - ~--.1 T -fi

~ 45° CHAMFER TYP

2X ¢ .188 THRU/

B 8 B

SHAFT

SCALE = 1/2

A A

DRAWING TITLE NAVSEA DRAWING NO.

SHAFT B I 53711 I 709 1 5032448 TH

SCALE: N/A ISHEET 62 OF

+ I I

5032448-062-1H-TFIX

MATER IAL LI ST FOR ONE PC 100

100-1 1 WOOD TEST SHAPE, 19 N DIA WOOD SEE NOTE 3 1. GLUED JOINTS IN THE LAMINATED WOOD TEST SHAPE

SHALL BE STAGGERED.

100-2 1 PL 1/8 X 18 DIA CRES ASTM A240

0 100-3 2 PL 1/8 X 1 X 1 1/16 CRES ASTM A240 2. WOOD TEST SHAPE IS TO BE COMPLETELY COATED WITH

0AT LEAST TWO COATS OF POLYESTER RESIN BEFORE

100-4 1 SHEET 1/16 X 12 X 60 CRES ASTM A240 FINAL SANDING AND BEFORE FITINGS ARE ATTACHED.

100-5 8 WOOD SCREW, FH, #10 X IN LG BRASS MIL-S-971 3. LAMINATED MAPLE, OAK OR ASH. FIR MAY BE USED IF 100-6 1 1 1/4 IPS, SCH 80, X 45 STEEL WW-P-404 OPTIONAL MAPLE, OAK OR ASH ARE NOT AVAILABLE. FIR SHALL

BE DRY NO. 1 SELECT VERTICAL GRAIN.

~------- 45-_-/'~r---------------i~

A c

5032448-063-1H-TFIX

RECESS INTO SHAPE

SO SIDES ARE FLUSH

INSTALL TO SU IT

¢ 1 3/4 FOR

PC 100-6

SHEET 63 OF

SCALE: N/A

4. THE BARREL BOLTS ON THE TEST STAND ARE NOT

INTENDED TO WITHSTAND THE TEST LOADS. LOCATE

HOLES IN THE SUPPORT PADS TO SUIT.

5. STAMP IN 3/16 INCH HIGH LETTERS

NNAVSEA DWG 5032448, PC 100. N

R 1/2

TYP

DRAWING TITLE

19- DIA WOOD TEST SHAPE

AND FITTINGS

2X ¢ 3/8

FOR LOOSE FIT

WITH BARREL BOLT,

PC 104-14

SEE NOTE 4

1 1/16 TYP

ON PC 100-1

~----.,~--2 1/2 TYP

BREAK EDGE OF PIPE

BOTH ENDS

8 19" DI A WOOD TEST SHAPE

SCALE = 1/4

8X ¢ .190 THRU

CSK TO .385 DIA

FOR PC 100-5

MATER IAL LI ST FOR ONE PC 101

101-1 1 WOOD TEST SHAPE. 21 N DIA WOOD SEE SPECIAL NOTE 3 1. GLUED JOINTS IN THE LAMINATED WOOD TEST SHAPE

SHALL BE STAGGERED.

101-2 1 PL 1/8 X 18 DIA CRES ASTM A240

0 101-3 2 PL 1/4 X 1 X 1 1/16 CRES ASTM A240 2. WOOD TEST SHAPE IS TO BE COMPLETELY COATED WITH

0AT LEAST TWO COATS OF POLYESTER RESIN BEFORE

101-4 1 SHT 1/16 X 7 X 66 CRES ASTM A240 FINAL SANDING AND BEFORE FITINGS ARE ATTACHED.

101-5 16 WOOD SCREW, FH. #10 X IN LG BRASS MIL-S-971 3. LAMINATED MAPLE. OAK OR ASH. FIR MAY BE USED IF 101-6 1 1 1/4 IPS. SCH 80. X 45 STEEL WW-P-404 OPTIONAL (SEE PC 100-6) MAPLE. OAK OR ASH ARE NOT AVAILABLE. FIR SHALL

BE DRY NO. 1 SELECT VERTICAL GRAIN.

A c

SHEET 64 OF

SEE

SCALE: N/A

4. THE BARREL BOLTS ON THE TEST STAND ARE NOT

INTENDED TO WITHSTAND THE TEST LOADS. LOCATE

HOLES IN THE SUPPORT PADS TO SUIT.

5. IF EX IST ING DUMMY IS SHORTER THAN 45 INCHES.

IT IS TO BE LENGTHENED AS SHOWN ON DWG

SS-709-5164217. DETAIL 31-E.

6. STAMP IN 3/16 INCH HIGH LETTERS

NNAVSEA DWG 5032448, PC 101. N

DETAIL 64-A

ROTATED CCW 90°

SCALE = 1/4

2 1/2 ----fooIt-----.-j

TYP

2X ¢ .375

FOR LOOSE FIT

WITH BARREL BOLT.

PC 104-14

+-----H:il-----'- ffi---...--::~--------67$ - --ffi---+ SEE NOTE 4

64-A

16X ¢ . 190 THRU.

CSK 80° TO ¢ .385

FOR PC 101-5

¢ 18---

CENTER ON

PC 101-1

DRAWING TITLE

21" DIA MK 48 WOOD TEST SHAPE

AND FITTINGS

RECESS INTO PC 101-1

SO SIDES ARE FLUSH.

INSTALL TO SU IT

~---20.828-----..

SCALE = 1/8

9 1/2 L I-----------..--------i

¢ 1 3/4 FOR

PC 101-6

\~---19.230---.-jl

\~--- 17. 963 -----II~

12.000 -, 14 16.401 ~I 9.000

6 . 000 ----.---+- I-;--- 14. 122-------;-j ---1..---1--\~ 13 . 031 ------.I

1~---20.470---~1

----------11.......----20.080---~1

~ 10. 479---.J

8 21" DIA MK 48 WOOD TEST SHAPE

SEE

NOTE 5

A c

5032448-064-1H-TFIX

R 10 1/2

5. STAMP IN 3/16 INCH HIGH LETTERS

NNAVSEA DWG 5032448. PC 102. N

WOOD TEST SHAPE IS TO BE COMPLETELY COATED WITH 0

AT LEAST TWO COATS OF POLYESTER RESIN BEFORE

FINAL SANDING AND BEFORE FITINGS ARE ATTACHED.

LAMINATED MAPLE, OAK OR ASH. FIR MAY BE USED IF

MAPLE, OAK OR ASH ARE NOT AVAILABLE. FIR SHALL

BE DRY NO. 1 SELECT VERTICAL GRAIN.

4. THE BARREL BOLTS ON THE TEST STAND ARE NOT

INTENDED TO WITHSTAND THE TEST LOADS. LOCATE

HOLES IN THE SUPPORT PADS TO SUIT.

NOTES:

1. GLUED JOINTS IN THE LAMINATED WOOD TEST SHAPE

SHALL BE STAGGERED.

,.-1 1/16

TYP

REMARKS

8 21" D I A WOOD BELLY BAND TEST SHAPE

SCALE = 1/8

I. 20 -I r

1/2

2X ¢ 3/8 FOR LOOSE

FIT WITH BARREL BOLT.

SEE NOTE 4

1~-+-4 1/2

1----2 15/16

TYP

SCALE = 1/8

VIEW 65-A

---'-----t--+.

-,tr-----+-- + r 2

2 11

2L I--..-----<t-------+--t- + -+-->-+----.>---.-J f ~ -I---~

18X ¢ .190--'''' CSK 80° TO '-----+-----I-----+---~.,..--l----------' ¢ .385

FOR PC 102-4

4 112 -"-'--1~ 102-1

MATER IAL LI ST FOR ONE PC 102

PC NO OTY DESCRIPTION MAT'L MAT'L SPEC

102-1 1 21 N DIA TEST SHAPE WOOD

102-2 2 PL 1/8 X 7 7/8 X 21 CRES ASTM A240

0 102-3 2 PL 1/8 X 1 X 1 1/16 CRES ASTM A240

102-4 18 #10 X IN LG F.H.WOOD SCREW BRASS MIL-S-971

2 15/16 ~

TYP

1 TYPI ---

2 TYPL

A A

DRAWING TITLE

TEST SHAPE,

21# DIA WOOD BELLY BAND

NAVSEA DRAWING NO.

B I 53711 I 709 I 5032448

SCALE: NI A ISHEET 65 OF

5032448-065-1H-TFIX

MATERIAL LIST FOR ONE PC 104

PC…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.