Amdt_0003.pdf

SPM4A8-13-R-0018 AMENDMENT 0003

The following additional information is a change to the Government’s technical requirements:

Paragraph 3.2.1. The Government requires a minimum width of 24 inches (by 10 feet long) usable space in the two anodize tanks (after the cathodes are in place and considering the 6-8 inches minimum space between the anodes (parts) and the cathodes). Other tanks may be resized to compensate.

Paragraph 3.3.1.2. The original paragraph is deleted in its entirety and replaced with the following:

“NAVFAC recently performed a Structural Analysis of the floor in the building, including next to the C- Line. In short, no forklifts are permitted in this area without structural analysis & possible floor support. Other material rigging will be required.”

A cover sheet has been created for specification LPS 310 that was referenced in the original specification. The cover sheet is included as page 3 of the amendment. Document LPS 310 is available from the buyer. All vendors are required to sign and return the cover sheet to indicate understanding and compliance with all requirements of LPS 310.

All interested vendors are required to return a signed copy of this amendment, along with any relevant offer revisions. Unless otherwise stated, original offers will be considered valid 90 days from the date of the signed amendment.

All other terms and conditions remain the same.

LPS 310

ALUMINUM ANODIZING

LOCAL PROCESS SPECIFICATION

Fleet Readiness Center South East

Naval Air Station

Jacksonville, FL

I have read and understand the requirements of

LPS 310

issued as part of SPM4A8-13-R-0018.

Signature & Date

Printed Name & Title

(This Page To Be Completed and Returned by the Vendor)