SPI_F01-502-9486.pdf
PDF 152 KB Posted
- Attached to
- LGM-30 Cable Assemblies Federal contract opportunity
- Solicitation number
- SPRHA2-22-R-0010
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains packaging and shipping requirements for federal contracts along with details of a related solicitation. The packaging standards specify that all wood used in containers, pallets and packing materials must be heat treated to 133 degrees Fahrenheit for 30 minutes to prevent the spread of invasive species. This is in accordance with International Standards for Phytosanitary Measures Number 15. The related solicitation is from the Defense Logistics Agency Aviation seeking cable assemblies under number SPRHA2-22-R-0010. The opportunity type is a solicitation and the description provided is for cable assemblies. The agency listed is the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA222R0010_______0001.pdf | ||
| SPI_F01-502-9483.pdf | ||
| EDLs.pdf | ||
| SPI_F01-497-4605.pdf | ||
| SPI_F00-155-8170.pdf | ||
| CPP.pdf | ||
| FATR.pdf | ||
| SOW.pdf | ||
| SPRHA222R0010.pdf | ||
| SPI_F01-503-0037.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CAUTION NOTICES
NOTICE 1: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.
NOTICE 2: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES
EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 3: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.
NOTICE 4: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM No. 15) REQUIREMENTS
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON SOLID WOOD
PACKING MATERIAL (SWPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING
CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR
LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF SOLID WOOD
PACKING MATERIAL (SWPM) SHALL BE CONSTRUCTED FROM HEAT-TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR
133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY
RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE
"INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM) No. 15." THIS DOCUMENT CAN BE FOUND AT www.ippc.int.
File details come from the government source that posted it. Updated .