SPI_F01-502-9483.pdf
PDF 137 KB Posted
- Attached to
- LGM-30 Cable Assemblies Federal contract opportunity
- Solicitation number
- SPRHA2-22-R-0010
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides packaging and shipping requirements for an electrical cable assembly special purpose item. It specifies that cable ends must be cushioned with tape-wrapped material and coils must be a minimum size wrapped in a barrier bag from which air is evacuated and sealed. The assembly is then to be placed in a shipping container with additional cushioning to ensure a snug fit, and the container secured with tape. The related federal contract opportunity is solicitation number SPRHA2-22-R-0010 from the Defense Logistics Agency Aviation for LGM-30 cable assemblies.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA222R0010_______0001.pdf | ||
| SPRHA222R0010.pdf | ||
| SPI_F01-503-0037.pdf | ||
| SPI_F01-502-9486.pdf | ||
| FATR.pdf | ||
| SOW.pdf | ||
| EDLs.pdf | ||
| SPI_F01-497-4605.pdf | ||
| SPI_F00-155-8170.pdf | ||
| CPP.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CAUTION NOTICES
NOTICE 1: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.
NOTICE 2: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES
EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 3: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.
NOTICE 4: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM No. 15) REQUIREMENTS
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON SOLID WOOD
PACKING MATERIAL (SWPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING
CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR
LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF SOLID WOOD
PACKING MATERIAL (SWPM) SHALL BE CONSTRUCTED FROM HEAT-TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR
133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY
RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE
"INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM) No. 15." THIS DOCUMENT CAN BE FOUND AT www.ippc.int.
ITEM NOMENCLATURE
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
NOTES:
1. CUSHION CABLE ENDS WITH REF -1, SECURING WITH TAPE, REF -2.
2. COIL MINIMUM 15 X 15. WRAP POINTED AREAS WITH REF -1. PLACE IN BARRIER BAG, REF -3, THEN EVACUATE AIR
AND SEAL.
3. PLACE INTO SHIPPING CONTAINER USING ADDITIONAL CUSHIONING, REF -1, TO INSURE A SNUG FIT.
4. SECURE CONTAINER USING TAPE, REF -4.
ITEM NOMENCLATURE
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
File details come from the government source that posted it. Updated .