SPI.pdf
PDF 340 KB Posted
- Attached to
- F-16 Rudder Federal contract opportunity
- Solicitation number
- SPRHA423R0133
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides packaging specifications and instructions for an F-16 rudder component. The solicitation is open only to approved sources ACT (CAGE 1XKR3) and Lockheed Martin (CAGE 81755). Interested parties can request the technical data package and review manufacturing qualification requirements. Packaging must use heat-treated and debarked wood conforming to International Standards for Phytosanitary Measures, and be certified by an accredited American Lumber Standards Committee agency. The solicitation is issued by the Defense Logistics Agency Aviation for an F-16 rudder component available to pre-approved sources.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA423R0133_______0001.pdf | ||
| EDR.pdf | ||
| EDL.pdf | ||
| FATR.pdf | ||
| Pkg_SOW.pdf | ||
| SPRHA423R0133.pdf | ||
| MQR.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 05 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
NOTES
1. WRAP ITEM IN REF.-11 TO ENSURE THAT BARE ITEM DOES NOT MAKE DIRECT CONTACT WITH CUSHIONING, REF.-10.
2. NAIL MOUNTING BLOCKS, REF.-2, TO REF.-3 AND REF.-4 PRIOR TO CUTTING BLOCKS OUT USING NAILS OR STAPLES
CONFORMING TO ASTM F1667. USE ASTM F1667 TO SECURE IN PLACE REF.-8 & REF.-12, REF.-9.
3. USE ADHESIVE A-A-59692, TYPE II, TO SECURE CUSHIONING, REF.-10, TO MOUNTING BLOCKS, REF.-3, -4, -9, AND
SADDLES, REF.-13 & -14.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
CAUTION NOTICES
File details come from the government source that posted it. Updated .