EDR.pdf
PDF 70 KB Posted
- Attached to
- F-16 Rudder Federal contract opportunity
- Solicitation number
- SPRHA423R0133
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains an engineering data requirements sheet and a related federal contract opportunity notice. The engineering data requirements sheet provides instructions for the manufacture of an aircraft rudder assembly with national stock number 1560-01-077-1314WF. It lists applicable specifications and standards in lieu of those indicated, and notes that specific source materials listed on technical drawings are the only authorized sources. The sheet also states that deviations from control drawings require prior approval and specifies part marking and material requirements.
The related federal contract opportunity is a solicitation for F-16 rudders open to approved manufacturers ACT and Lockheed Martin. Interested parties can request the technical data package and qualifications documentation from attachments. The solicitation is issued by the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA423R0133_______0001.pdf | ||
| FATR.pdf | ||
| SPI.pdf | ||
| Pkg_SOW.pdf | ||
| SPRHA423R0133.pdf | ||
| MQR.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RUDDER ASSY-AIRCRAFT
2. PART NUMBER:
16T7302-805
3. NATIONAL STOCK NUMBER:
1560-01-077-1314WF
PREPARED BY:
Bill Garcia
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
2/13/2019
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT
BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE
ITEMS.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL BY OO-ALC
ENGINEERING.
7. PART MARKING PER MIL-STD-130 IN LIEU OF FPS-3008
8. 16PR100 IS NOT REQUIRED FOR MANUFACTURE AND WILL NOT BE PROVIDED.
9. 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA LISTED ON THE EDL.
10. USE MATERIAL PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4.
File details come from the government source that posted it. Updated .