Specifications for AB and DI Concurrent Systems.pdf

SPECIFICATIONS FOR THE AFTERBODY AND DIGITAL INJECTION

CONCURRENT SYSTEMS

AFTERBODY (AB) SYSTEM; (two (2) each) with the following specifications:

iHawk 2U rackmount system containing two 3.1 GHz Intel Xeon Gold 6254 processors, 256 GB (16 x 16gb rdimm, 3200mt/s, dual rank) of main memory, Real-time Clock & Interrupt Module, four USB ports, one serial port, keyboard/mouse, integrated on-board graphics controller, Trusted Platform Module 2.0, C2, RAID 0 for HDDs or SSDs (Matching Type/Speed/Capacity), PERC H330 RAID Controller, Adapter, Low Profile, 600GB 15K RPM SAS 12Gbps 512n 2.5in Hot- plug Hard Drive, Intel X550 Quad Port 10GbE BASE-T, rNDC, DVD ROM, SATA, Internal, Dual, Hot-plug, Redundant Power Supply (1+1), 1100W, 2U Standard Bezel, Sliding Rails Without Cable Management Arm, 5-year Next Business Day Support, PCIe Configuration 5: 6 x8, 2 x16 slots, 71.55 cm DeepReal-Time Clock & Interrupt Module PCIe card (RCIM III) (1579271-914) , 64-bit RedHawk Linux with Red Hat Workstation install [2010471-001], rebuild image media, CentOS media (WA-EM64T- AMD64 / 730-WA-CENT / 730-RHAWK-IMAGE) Include 6FT 15A 14AWG SJT C13/C14 100-230V AC POWER CORD option.

Tesla T4 CUDA Computing Processor w/16 GB memory.

Alpha-Data ADM-XRC- 7K1/K325T-2/Pn4 FPGA XMC Module w/ ADM-PCIe- XMC Carrier for PCIe x8 Gen1/Gen2, Pn4 Connector installed, and XRM2-IO146 High Density LVTTL/LVDS Front Panel Adapter, air cooled.

Device Info:

- Xilinx Kintex-7 XCK325T

- LUTs = 326k FFs = 407k DSPs = 840

- BRAM = 16Mb(28.6Mb)

- 1x PCIe® Gen2

Application Data Memory

- 2x 256MB DDR3-1600

Configuration Memory

- BPI 512MBit Flash Memory Configuration Modes

- PCI Express direct to SelectMAP port

- From Flash direct on power up

- PCI Express Gen2 x1, x2 or x4 link to separate bridge device with 2GB/s local link to user FPGA

- 4 DMA Controllers

- Interrupt Controllers

Input/Output Interfaces

- High-Speed Serial Links to XRM2

- Includes XRM2-IO146 High Density LVTTL/LVDS Front Panel Adapter

RedHawk Linux 7.5 Alpha-Data ADB3 device kernel driver and ADM- XRC-7K1 Gen 3 SDK. Software provided will be the vendor’s ported to build and run under RedHawk Linux 7.5, NO “High Intellectual Property” content rating. If this item is checked, the quotation must ensure that this rating is represented, and that the customer understands its meaning. Prerequisites: Initial purchase of RIQ13304C-

014 (ADM-XRC-7K1 SDK).

RCIM III 1-meter Optical Synchronization Cable

PCIe-16AI64SSC-64-50M-0-0 - PCIE Device 16-Bit - 32(Diff)/64(SE), Ch. A/D 200KSPS 16-bit ADC per Channel, Simultaneous Sampling of all inputs, D32/D64, Bi-polar/Uni Polar 2.5V, 5V & 10V, Clock Freq. 50.000M - This card is a true PCIe x1 form-factor. GS P/N PCIe 16AI64SSC-64-50M-0-0. Board Connector: Standard 80-pin 0.050 dual-ribbon socket, Robinson Nugent P50E-080S-TG or equivalent.

Supported by RedHawk and SimWB

RedHawk Linux Revision 7.5 driver for CS-GS-16AI64SSC-E on iHawk

System Integration for preceding items

Yearly Software Maintenance following Concurrent's standard warranty

Engineering Services to provide the Alpha-Data ADB3 device kernel driver and ADM- XRC-7K1 Gen 3 SDK for RedHawk Linux 7.5. Software provided will be the vendor’s ported to build and run under RedHawk Linux 7.5. Enhancements and/or design changes to the driver are not included with these engineering services.

Prerequisites: Purchase of RIQ13304C-035 driver for RedHawk 7.5; five (5) years

DIGITAL INJECTION (DI) SYSTEM; (two (2) each) with the following specifications:

iHawk 2U rackmount system containing two 3.1 GHz Intel Xeon Gold 6254 processors, 256 GB (16 x 16gb rdimm, 3200mt/s, dual rank) of main memory, Real-time Clock & Interrupt Module, four USB ports, one serial port, keyboard/mouse, integrated on-board graphics controller, Trusted Platform Module 2.0, C2, RAID 0 for HDDs or SSDs (Matching Type/Speed/Capacity), PERC H330 RAID Controller, Adapter, Low Profile, 600GB 15K RPM SAS 12Gbps 512n 2.5in Hot- plug Hard Drive, 600GB 15K RPM SAS 12Gbps 512n 2.5in Hot-plug Hard Drive, 600GB 15K RPM SAS 12Gbps 512n 2.5in Hot-plug Hard Drive, 600GB 15K RPM SAS 12Gbps 512n 2.5in Hot-plug Hard Drive, Intel X550 Quad Port 10GbE BASE-T, rNDC, DVD ROM, SATA, Internal, Dual, Hot-plug, Redundant Power Supply (1+1), 1100W, 2U Standard Bezel, Sliding Rails Without Cable Management Arm, 5-year Next Business Day Support, PCIe Configuration 5: 6 x8, 2 x16 slots, 71.55 cm DeepReal-Time Clock & Interrupt Module PCIe card (RCIM III) (1579271-914) , 64-bit RedHawk Linux with Red Hat Workstation install [2010471-001], rebuild image media, CentOS media (WA- EM64T-AMD64 / 730-WA-CENT / 730-RHAWK-IMAGE) Include 6FT 15A 14AWG SJT C13/C14 100-230V AC POWER CORD option.

Tesla T4 CUDA Computing Processor w/16 GB memory

Alpha-Data ADM-XRC- 7K1/K325T-2/Pn4 FPGA XMC Module w/ ADM-PCIe-XMC Carrier for PCIe x8 Gen1/Gen2, Pn4 Connector installed, and XRM2-IO146 High Density LVTTL/LVDS Front Panel Adapter, air cooled.

Device Info:

- Xilinx Kintex-7 XCK325T

- LUTs = 326k FFs = 407k DSPs = 840

- BRAM = 16Mb(28.6Mb)

- 1x PCIe® Gen2

Application Data Memory

- 2x 256MB DDR3-1600 Configuration Memory

- BPI 512MBit Flash Memory Configuration Modes

- PCI Express direct to SelectMAP port

- From Flash direct on power up

- PCI Express Gen2 x1, x2 or x4 link to separate bridge device with 2GB/s local link to user FPGA

- 4 DMA Controllers

- Interrupt Controllers Input/Output Interfaces

- High-Speed Serial Links to XRM2

- Includes XRM2-IO146 High Density LVTTL/LVDS Front Panel Adapter

RedHawk Linux 7.5 Alpha-Data ADB3 device kernel driver and ADM- XRC-7K1 Gen 3 SDK. Software provided will be the vendor’s ported to build and run under RedHawk Linux 7.5. NO “High Intellectual Property” content rating. If this item is checked, the quotation must ensure that this rating is represented, and that the customer understands its meaning. Prerequisites: Initial purchase of RIQ13304C-014

(ADM-XRC-7K1 SDK)

RCIM III 1-meter Optical Synchronization Cable 32-ch, 18-bit NIST D/A PCIe Card, Single-ended RedHawk Linux driver for CP-DAx AO Card Analog I/O Card Synch Cable, 1 Ft.

I/O Terminal Breakout Module 68-pin SCSI-3 I/O Card Interface Cable, 10 feet PCIe Expansion Chassis 4UV-10-2 - 4U 18.5" D PCIE-24DSI6C500K-6-SF-6V - 24-Bit, 6-Channel, 500KSPS, Analog Input Module

With 6 Delta-Sigma Input Channels. This device is a PMC card mounted on a PCIE to PMC adapter.

General Standards PCIE-24DSI6C500K-6-SF-6V Analog Input adapter’s kernel device driver for RedHawk Linux 7.5 Prerequisites: Initial purchase of RIQ13323A-011, Driver is required for each system

System Integration for preceding items Total Yearly Software Maintenance following Concurrent's standard warranty Engineering Services to support the General Standards PCIE- 24DSI6C500K-6-SF-

6V Analog Input adapter’s kernel device driver with RedHawk Linux 7.5. Driver provided will be the General Standards currently available driver modified to build and load with RedHawk Linux 7.5Enhancements, features or significant bugfixes are beyond the scope of the services quoted here. Prerequisites: Separate purchase of RIQ13323A-031 for each system, Purchase of RIQ13323A-041; five years

Quadro GV100 w/32 GB memory