Specifications.docx
DOCX document 16 KB Posted
- Attached to
- SLED CNC ROUTER State and local contract opportunity
- Solicitation number
- 5400029051
- Issued by
- Richland County, South Carolina
About this file
This is a specifications document issued by the South Carolina Law Enforcement Division (SLED) for the procurement of a CNC Router. The equipment must feature a steel gantry bridge and welded steel base frame with a working area of 30" wide by 40" long (not to exceed 36" by 42"). The machine must include ball screw drives on all X, Y, and Z axes, a minimum 800 ounce Z-axis motor (NEMA 34), and an HSD spindle with a minimum of 2.2 HP electric spindle with electric cooling. Additional operational requirements include a VFD for single phase operation at 100% duty cycle, homing and self-alignment capabilities via limit switches, 25MM linear guide rails on all axes, and an independent tool measure switch for tool length calculation. The machine must be 4th axis ready, compatible with Windows 11 software, include a full-size desktop computer with solid state hard drive, and operate with a PCI card controller similar to a WinCNC industrial controller. The CNC router must be delivered fully assembled and tested to SLED headquarters at 4400 Broad River Road, Columbia, SC 29210, with SLED providing forklift unloading assistance.
The specifications require the machine to include a steel machine stand with four casters and locking capability, T-slots with a minimum of four clamps in the table clamp kit, and power cords for plug and play operation. Service and support requirements include lifetime technical support via phone, email, and PC-to-PC connectivity, unlimited access to training, and online training videos. No pricing information, response deadlines, award dates, contract terms, or set-asides are specified in this document.
View the file
Other files for this state and local contract opportunity
| File | Type | Posted |
|---|---|---|
| CNC Solicitation.rtf | RTF text file |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The South Carolina Law Enforcement Division (SLED) is seeking bids for a CNC Router meeting the following specifications.
· Must have Steel Gantry Bride
· Must Have Steel Base Frame – Welded – Not Bolted
· Must have Minimum of 30” wide x 40” Long working area not to exceed 36” by 42”
· Must have a Gantry overhang on the Right Side of Machine
· Must Be Ball Screw Drive on X, Y, and Z Axis – No Ace screws, Lead Screws, or Rack and Pinion Accepted
· Must have Minimum of 800 Oz. Z Motor – Nema 34
· Must Include an HSD Spindle – Minimum of 2.2HP
· Must be Electric Spindle with Electric Cooling – No Water Cooled or Shaft Fan Driven Accepted
· Must have VFD for Single Phase Operation at 100% Duty
· Must include Homing and Self Alignment via Limit switches on X, Y, and Z
· All Axis Must be 25MM Linear guide rails
· Must Include Independent Tool Measure switch for Tool Length Calculation Separately from Z Zero – No Combo Switches
· Machine must be 4th Axis Ready for future installation of 4th Axis on Right Side
· Must be compatible with Windows 11 Software
· Must Include a Full Size Desktop computer with Solid State Hard drive
· Machine Must Run on a PCI Card Controller Similar to WinCNC industrial controller
· Must have Steel Machine Stand with 4 Casters and Locking Ability
· Must have T-Slots installed in the Table with Clamp Kit Included (Minimum of 4 Clamps)
· Must Include Lifetime Tech Support (phone, Email, PC to PC connectivity)
· Must Included Unlimited Access to Training
· Must Include Online Training Videos
· Must be fully Assembled and Tested Prior to Shipping
· Must Include Power Cords for Plug and Play Operation
· Must be delivered to SLED Headquarters located at 4400 Broad River Road, Columbia, SC 29210.
· SLED will provide forklift for unloading equipment.
File details come from the government source that posted it. Updated .