SPE4A521R0269_Appendix_B.xlsx

1-Quality Matrix

NIIN FSC

0:

Federal Supply Class

The Federal Supply Class (FSC) is contained in the first four digits of a National Stock Number (NSN). It is used to identify the general family of equipment into which any item having an NSN, happens to fall.

Link to Cataloging Handbook H2:

http://www.dispositionservices.dla.mil/sales/Documents/Sales/h2book.pdf Site 0:

Inventory Control Point Profit Center

DSCR:

Profit Center

Managing organization Division Branch IST Label Nomenclature ALRE 0:

Aircraft Launch and Recovery Equipment

Identified by Special Procedures Code (SPC) = '01'.

IRPOD

0:

Individual Repair Parts Ordering Data (IRPOD)

Identified by Special Procedures Code (SPC) = '02'.

Individual Repair Parts Ordering Data (IRPOD) are items within the Navy Nuclear community that have a need for specific technical data to be defined.

ICBM

0:

InterContinental Ballistic Missile

Identified by Special Procedures Code (SPC) = '04'.

CSI

0:

Critical Safety Item (CSI) derived from Special Procedures Code (SPC)

SPC Service 03 CSI-Navy 05 CSI-Army 06 CSI-Air Force

07 CSI-CBDE

FMS

0:

Foreign Military Sales item Config Mgmt 0:

Configuration Management Item

PIC

0:

Place of Inspection Code (PIC)

1 Inspection at Source / Acceptance at Source 2 Inspection at Destination / Acceptance at Destination C Inspection at Source / Acceptance at Source (used for Critical application items) 3 Inspection at Source/ Acceptance at Destination (used for Hazardous Materials) 4 Inspection at Destination/ Acceptance at Source (used for Hazardous Materials) U/I 0:

Unit of Issue A two character alphabetic code that denotes a physical measurement or count of an item.

How the item is sold/issued throughout the DoD Logistics system.

AM Ampoule DZ Dozen PT Pint AT Assortment EA Each PZ Packet AY Assembly FT Foot QT Quart BA Ball FV Five of an item RA Ration BD Bundl FY Fifty of an item RL Reel BE Bale GL Gallon RM Ream BF Board Foot GP Group RO Roll BG Bag GR Gross SD Skid BK Book HD Hundred SE Set BL Barrel HK Hank SF Square Foot BO Bolt IN Inch SH Sheet BR Bar JR Jar SK Skein BT Bottle KT Kit SL Spool BX Box LB Pound SO Shot CA Cartridge LG Length SP Strip CB Carboy LI Lite SX Stick CD Cubic Yard MC Thousand Cubic Feet SY Square yard CE Cone ME Meal TD Twenty-four of an item CF Cubic Foot MR Meter TE Ten of an item CK Cake MX Thousand TF Twenty-five of an item CL Coil OT Outfit TN Ton CN Can OZ Ounce TS Thirty-six of an item CO Container PD Pad TU Tube CY Cylinder PG Package VI Vial CZ Cubic Meter PM Plate YD Yard DR Drum PR Pair BUoM 0:

Base Unit of Measure A two character alphabetic code that denotes a physical measurement or count of an item.

How the item requirements are calculated; usually the lowest possible measurement for the item.

AM Ampoule DZ Dozen PT Pint AT Assortment EA Each PZ Packet AY Assembly FT Foot QT Quart BA Ball FV Five of an item RA Ration BD Bundl FY Fifty of an item RL Reel BE Bale GL Gallon RM Ream BF Board Foot GP Group RO Roll BG Bag GR Gross SD Skid BK Book HD Hundred SE Set BL Barrel HK Hank SF Square Foot BO Bolt IN Inch SH Sheet BR Bar JR Jar SK Skein BT Bottle KT Kit SL Spool BX Box LB Pound SO Shot CA Cartridge LG Length SP Strip CB Carboy LI Lite SX Stick CD Cubic Yard MC Thousand Cubic Feet SY Square yard CE Cone ME Meal TD Twenty-four of an item CF Cubic Foot MR Meter TE Ten of an item CK Cake MX Thousand TF Twenty-five of an item CL Coil OT Outfit TN Ton CN Can OZ Ounce TS Thirty-six of an item CO Container PD Pad TU Tube CY Cylinder PG Package VI Vial CZ Cubic Meter PM Plate YD Yard DR Drum PR Pair U/I Conv Fctr 0:

Unit of Issue Conversion Factor

Factor applied to Base Unit of Measure values to convert them to Sales Unit of Measure.

Shelf Life Type 0:

Shelf Life Code Type I - Item has a defined Shelf Life period.

Type II - Item Shelf Life period is extendible.

Type I Type II Shelf-Life Period Months Quarters 0 (Zero) 0 (Zero) Non-deteriorative No Shelf-Life Applies N/A N/A A N/A 1 Month 25 days N/A B N/A 2 Months 50 days N/A C 1 3 Months 75 days N/A D N/A 4 Months 3 1 E N/A 5 Months 4 1 F 2 6 Months 5 2 G 3 9 Months 8 3 H 4 12 Months (1.00-Year) 10 3 J N/A 15 Months (1.25-Years) 13 4 K 5 18 Months (1.50-Years) 15 5 L N/A 21 Months (1.75-Years) 18 6 M 6 24 Months (2.00-Years) 21 7 N N/A 27 Months (2.25-Years) 23 8 P N/A 30 Months (2.50-Years) 26 9 Q 7 36 Months (3.00-Years) 31 10 R 8 48 Months (4.00-Years) 41 14 S 9 60 Months (5.00-Years) 51 17 I N/A 72 Months (6.00-Years) 61 20 T N/A 84 Months (7.00-Years) 71 24 U N/A 96 Months (8.00-Years) 82 27 V N/A Variable such as: 90, 132, 216, 228, etc. 77, 113, 184, 194, 26, 38, 61, 65, Months or any other number of months etc. etc.

not specifically assigned.

W N/A 120 Months (10-Years) 102 34 Y N/A 180 Months (15-Years) 153 51 Z N/A 240 Months (20-Years) 204 68 N/A X Shelf-Life Period Greater than 60 Months 85 percent of number 85 percent of number for Type II Extendible Items. of months. of quarters.

Shelf Life Months 0:

Shelf Life Code Type I - Item has a defined Shelf Life period.

Type II - Item Shelf Life period is extendible.

Type I Type II Shelf-Life Period Months Quarters 0 (Zero) 0 (Zero) Non-deteriorative No Shelf-Life Applies N/A N/A A N/A 1 Month 25 days N/A B N/A 2 Months 50 days N/A C 1 3 Months 75 days N/A D N/A 4 Months 3 1 E N/A 5 Months 4 1 F 2 6 Months 5 2 G 3 9 Months 8 3 H 4 12 Months (1.00-Year) 10 3 J N/A 15 Months (1.25-Years) 13 4 K 5 18 Months (1.50-Years) 15 5 L N/A 21 Months (1.75-Years) 18 6 M 6 24 Months (2.00-Years) 21 7 N N/A 27 Months (2.25-Years) 23 8 P N/A 30 Months (2.50-Years) 26 9 Q 7 36 Months (3.00-Years) 31 10 R 8 48 Months (4.00-Years) 41 14 S 9 60 Months (5.00-Years) 51 17 I N/A 72 Months (6.00-Years) 61 20 T N/A 84 Months (7.00-Years) 71 24 U N/A 96 Months (8.00-Years) 82 27 V N/A Variable such as: 90, 132, 216, 228, etc. 77, 113, 184, 194, 26, 38, 61, 65, Months or any other number of months etc. etc.

not specifically assigned.

W N/A 120 Months (10-Years) 102 34 Y N/A 180 Months (15-Years) 153 51 Z N/A 240 Months (20-Years) 204 68 N/A X Shelf-Life Period Greater than 60 Months 85 percent of number 85 percent of number for Type II Extendible Items. of months. of quarters.

HMIC

0:

Hazardous Material Indicator Code (HMIC) Hazardous Materials Information Resource System (HMIRS)

D - No info in HMIRS; table I Fed Std 313, MSDS required.

N - Indicates there is no data in the HMIRS.

P - No info in HMIRS; table II Fed Std 313 & MSDS may be required.

Y - Indicates information is in the HMIRS.

CIC

0: Critical Item Code (CIC)

A code that identifies items determined to have critical application in accordance with DLAR 3200.3. This code identifies items essential to the preservation of life in emergencies or essential to end item or system performance, the failure ofwhich would adversely affect the successful accomplishment ofa military operation.

PMIC

0:

Precious Metal Indicator Code (PMIC)

A Item does not contain Precious Metal.

C Item contains combination of two or more precious metals (silver, gold, platinum).

G Item contains gold.

P Item contains platinum family metals.

R Item contains Rhenium S Item contains silver.

U Precious Metal Content is unknown.

V Precious Metal type varies between manufacturers.

Tech Manual 0:

Technical Manual Required

TM1 - Commercial Manual TM5 - Military Manual

FSI

0:

Flight Safety Item

LSE

0:

Life Support Equipment

FAT

0:

First Article Test Indicator Govt Tool 0:

Governement Furnished Tooling Govt Matl 0:

Governement Furnished Material Govt Prop 0:

Governement Furnished Property Govt Prop/Tool/STE 0:

Government Furnished Property Tooling Special Test Equipment

QPL

0:

QUALIFIED PRODUCTS LIST (QPL)

A list of products that have met the qualification requirements stated in the applicable specification.

No Entry NQ QPL is not applicable Q QPL is applicable QL QPL is applicable, Limited NQL No QPL is applicable

COQC

0:

Certificate of Quality Conformance (COQC) Hghr Lvl Qual 0:

HIGHER LEVEL QUALITY

Derived from Quality Control Code.

Where position 1 of QCC = 'E','F','K','L','Q','R' Prod Verif Tstg 0:

Product Verification Testing Derived from Quality Control Code.

Where position 2 of QCC = 'B','E','F','G' Proc Ctrl 0:

Statistical Process Control Derived from Quality Control Code.

Where position 3 of QCC = 'G' Govt Fit Verif 0:

Government Fit Verification Derived from Quality Control Code.

Where position 1 of QCC = 'J','K','L' Measure & Testg 0:

Measurement & Testing Equipment Indicator Derived from Quality Control Code.

Where position 2 of QCC = 'C','E','H','G'

COTS

0:

Commercial Off the Shelf item Rights Guard 0:

Special Data License Agreement

BC - Boeing Company CAT - Caterpillar CMC - Colt Manufacturing Company FNH - Fabrique Nationale Herstal GE - General Electric HH - Hughes Helicopter HOIE - Karl H Hioe and Company LM - Lockheed (C5, C141, C130) MD - McDonnell Doug (M242 Helo) N - No NG - Northrup Grumman NOLA - No Spec. Lisc Agree Appl OTO - OTO Melaro, S. P. A.

RO - Royal Ordinance Y - Yes

QCC

0:

Quality Control Code (QCC)

QCC -- First Position (Contract Quality Requirements) A Contract Quality Requirements further defined.

Material Master - Additional Data - Internal Comments B Commercial (Any System Offered) C Contractor Responsibility D Standard Inspection E Higher Level Contract Quality F Higher Level Contract Quality - ISO 9001:2000 G Commercial - First Article Testing Government H Contractor Responsibility - First Article Testing Government J Standard Inspection - First Article Testing Government K Higher Level Contract Quality - First Article Testing Government L Higher Level Contract Quality ISO 9001:2000 First Article Testing Government M Commercial - First Article Testing Contractor N Contractor Responsibility - First Article Testing Contractor P Standard Inspection - First Article Testing Contractor Q Higher Level Contract Quality - First Article Testing Contractor R Higher Level Contract Quality ISO 9001:2000 First Article Testing Contractor QCC -- Second Position (Quality Subsystem Identification) A No Quality Subsystem Requirements B Product Verification Testing (PVT) C Measurement and Test Equipment (M/TE) D Certificate of Conformance (CoC) E Product Verification Testing / Measurement and Test Equipment (PVT / M/TE) F Product Verification Testing / Certificate of Conformance (PVT / COC) G Product Verification Testing / Measurement and Test Equipment / Certificate of Conformance (PVT / M/TE / COC) H Measurement and Test Equipment / Certificate of Conformance (M/TE / COC) QCC -- Third Position (Quality Specific Identification) A No Specific requirements B Calibration System Requirements C Quality Assurance Letter of Instruction (QALI) D Pre-award Survey E Post-award Conference F Shelf Life - Depot Storage Standard Actions G Statistical Process Control (SPC) H CIM/IMQIP Controlled Industrial Material / Industrial Material Quality Improvement Program J Deliverable Data - DD 1423 K Two or more codes apply L Local Clause(s) apply M One or more codes and local clause(s) apply N Dermatology and Toxicity (DSCP Medical use) P Additional Requirements - Material Master Additional Data - Internal Comments

DWG

0:

Drawing Required

Document Management System contains at least one record with a Document Type = "DWG" related to this NIIN.

MYL

0:

Mylar Required

Document Management System contains at least one record with a Document Type = "MYL" related to this NIIN.

QAP

0:

Quality Assurance Provision Applies

Document Management System contains at least one record with a Document Type = "QAP" related to this NIIN.

Export Control Contains Classif ENAC 0:

ENvironmental Attributes Code

A code that indicates whether an item has certain attributes that meet or exceed certain environmental guidelines.

EF Building Insulation EG Insulation with Recycled Content Material Insulation with Recycled Content Material EH Cement and Concrete Containing Fly Ash Cement and Concrete Containing Fly Ash EJ Cement and Concrete Containing Ground Granulated Blast-Furnace Slag (GGBF) C & C Cntng Ground Granulated Blast-Furnace Slag EK Structural Fiberboard EL Laminated Paperboard EM Carpet EN Floor Tiles EP Patio Blocks EQ Latex Paint FD Shower and Restroom Dividers GG Windows - Residential Landscaping Products FA Garden and Soaker Hoses FB Lawn and Garden Edging FE Hydraulic Mulch FF Yard Trimming Compost Miscellaneous Products E9 Pallets Non-Paper Products E1 Office Recycling Containers E2 Office Waste Receptacles E3 Plastic Desktop Accessories E4 Remanufactured Toner Cartridges E5 Binders E6 Printer Ribbons E7 Plastic Trash Bags E8 Plastic Envelopes Paper and Paper Products EA Paper and Paper Products Park and Recreation Products EX Playground Surfaces EY Running Tracks EZ Plastic Fencing Vehicular Products EB Lubricating Oil Containing Re-Refined Oil ED Retread Tires EE Reclaimed Engine Coolant ER Traffic Barricades ES Traffic Cones ET Parking Stops EU Channelizers EV Delineators EW Flexible Delineators SMS Supply Chain

DSCR:

Supply Chain:

(position 3-4 of Profit Center)

Avtn = Aviation (1011) pos. 1-4 NDLA = Non-DLA Industrial Support Activities (1111) pos. 1-4 Land = Land (12) Mrtm = Maritime (13) Mdcl = Medical (21) Subs = Subsistence (22) C&T = Clothing & Textiles (23) C&E = Construction & Equipment (24) IH = Industrial Hardware (25)

(5011) CI = Common Industrial (5012) pos. 1-4 (replaced by IH) (5013)

DRMO = DLA Disposition Services (8000) pos. 1-4 (formerly Defense Reutilization & Marketing Ofc) Docs = DLA Document Services (854) pos. 1-3 (formerly Document Automation & Production Services) Nuclear Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against at least one of these seven WSDCs:

E/I WSDC Weapon System Description

B-2 FMF AIRCRAFT,B-2 BOMBER (ATB)

B-2 FNF SUPPORT EQUIPMENT, B-2 BOMBER

B-2 FOF ENGINE,F118-GE-100 (B-2 BOMBER)

B-52 04F AIRCRAFT, STRATOFORTRESS B-52

B-52 ABF SUPPORT EQUIPMENT, B-52 AIRCRAFT

B-52 AYF ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H)

ICBM 01F MISSILE, MINUTEMAN III, LGM-30

ALCM 36F MISSILE, AIR LAUNCH CRUISE (ALCM) AGM-86B

B-2 Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against at least one B-2 WSDC:

FMF AIRCRAFT,B-2 BOMBER (ATB)

FNF SUPPORT EQUIPMENT, B-2 BOMBER

FOF ENGINE,F118-GE-100 (B-2 BOMBER)

Aircraft FMF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

FMF AIRCRAFT,B-2 BOMBER (ATB)

Support FNF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

FNF SUPPORT EQUIPMENT, B-2 BOMBER

Engine FOF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

FOF ENGINE,F118-GE-100 (B-2 BOMBER)

B-52 Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against at least one B-52 WSDC:

04F AIRCRAFT, STRATOFORTRESS B-52

ABF SUPPORT EQUIPMENT, B-52 AIRCRAFT

AYF ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H)

Aircraft 04F Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

04F AIRCRAFT, STRATOFORTRESS B-52

Support ABF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

ABF SUPPORT EQUIPMENT, B-52 AIRCRAFT

Engine AYF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

AYF ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H)

ICBM 01F

Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

01F MISSILE, MINUTEMAN III, LGM-30

ALCM 36F

Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

36F MISSILE, AIR LAUNCH CRUISE (ALCM) AGM-86B

NRP

Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

21N Nuclear Reactor Program Ohio Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

23N Ohio Class Submarine Count 0:

Count of distinct WSDCs

&"Courier New,Bold"&8DSCR-BAE Page &P of &N &"Courier New,Bold"&8&A / &F

2-Tech Matrix

NIIN FSC Supply Chain

DSCR:

Supply Chain:

(position 3-4 of Profit Center)

Avtn = Aviation (1011) pos. 1-4 NDLA = Non-DLA Industrial Support Activities (1111) pos. 1-4 Land = Land (12) Mrtm = Maritime (13) Mdcl = Medical (21) Subs = Subsistence (22) C&T = Clothing & Textiles (23) C&E = Construction & Equipment (24) IH = Industrial Hardware (25)

(5011) CI = Common Industrial (5012) pos. 1-4 (replaced by IH) (5013)

DRMO = DLA Disposition Services (8000) pos. 1-4 (formerly Defense Reutilization & Marketing Ofc) Docs = DLA Document Services (854) pos. 1-3 (formerly Document Automation & Production Services) Division Profit Center Product Specialist Nomenclature AMC 0:

Acquisition Method Code (AMC)

0 Not established.

1 Suitable for competitive acquisition.

2 Suitable for competitive acquisition for the first time.

3 Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.

4 Acquire, for the first time, directly from the actual manufacturer rather than the prime contractor who is not the actual manufacturer.

5 Acquire only from the prime contractor although the engineering data identifies the CAGE and part number of a source other than the prime.

AMSC

0: Acquisition Method Suffix Code (AMSC) 0 Not established.

A Government's rights to use data in its possession is questionable. Valid AMCs: 1, 2, 3, 4 and 5.

B Acquisition of this part is restricted to source(s) specified on: Source Control, Altered Item or Selected Item drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.

C This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

D The data needed to produce this item from additional sources is not physically available.

Valid AMCs: 3, 4 and 5.

G The Government has unlimited rights to the technical data, and the data package is complete.

Valid AMCs: 1 and 2.

H The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). Valid AMCs: 1, 2, 3, 4 and 5.

K This part must be produced from class 1A castings (e.g., class 1 of MIL-C-6021) and similar type forgings. The part must be procured only from sources which use castings or forgings obtained from approved (controlled) source(s). Valid AMCs: 1, 2, 3, 4 and 5.

L The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). Valid AMCs: 1, 2, 3, 4 and 5.

M Master or coordinated tooling is required to produce this part. This tooling is not owned by the Government or, where owned, cannot be made available to other sources. Valid AMCs: 1, 2, 3, 4 and 5.

N This part requires special test and/or inspection facilities to determine and maintain ultra-precision quality for its function or system integrity. Substantiation and inspection of the precision or quality cannot be accomplished without such specialized test/inspection facilities.

Valid AMCs: 1, 2, 3, 4 and 5.

P The rights to use the data needed to purchase this part from additional sources are not owned by the Government and cannot be purchased. Valid AMCs: 1, 2, 3, 4 and 5.

Q The government does not have adequate data, lacks rights to data, or both, needed to purchase this part from additional sources. Valid AMCs: 1, 2, 3, 4 and 5.

R The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them.

Valid AMCs: 1, 2, 3, 4 and 5.

S Procurement of this item restricted to limited source(s) because security classifiation of confidential or higher prevents public disclosure. Valid AMCs: 1, 2, 3, 4 and 5.

T Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

U The cost to the Government to breakout this part and acquire it competitively has been determined to exceed the projected savings over the life span of the part. Valid AMCs: 1, 2, 3, 4 and 5.

V This part has been designated a high-reliability part under a formal reliability program.

Probability of failure would be unacceptable from the standpoint of safety of personnel and/or equipment. The cognizant engineering activity has determined that data to define and control reliability limits cannot be obtained nor is it possible to draft adequate specifications for this purpose. Valid AMCs: 1, 2, 3, 4 and 5.

Y The design of this part is unstable. Engineering, manufacturing, or performance characteristics indicate that the required design objectives have not been achieved. Major changes are contemplated because the part has a low process yield or has demonstrated marginal performance during tests or service use. These changes will render the present part obsolete and unusable in its present configuration. Limited acquisition from the present source is anticipated pending configuration changes. Valid AMCs: 1, 2, 3, 4 and 5.

Z This part is a commercial/non-developmental/off-the-shelf-item. Valid AMCs: 1, 2, 3, 4 and 5.

CSI

0:

Critical Safety Item (CSI) derived from Special Procedures Code (SPC)

SPC Service 03 CSI-Navy 05 CSI-Army 06 CSI-AirF (Air Force) 07 Chem-Bio (CBDE)

SPC

0:

Special Procedures Code (SPC)

01 - AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE)

Navy Carrier and Carrier training

02 - INDIVIDUAL REPAIR PART ORDERING DATA (IRPOD)

Items within the Navy Nuclear community with Specific Tech data needs identified in a bi-monthly IRPIL (Individual Repair Parts Issue List)

03 - NAVY IDENTIFIED CRITICAL SAFETY ITEM (CSI)

All of these items will also be Flight Safety Indicator (FSI)

04 - INTERCONTINENTAL BALLISTIC MISSILE (ICBM) ITEM

Air Force defined items, also called NUCLEAR HARDENED

05 - ARMY DESIGNATED CRITICAL SAFETY ITEM (CSI)

All of these items will also be Flight Safety Indicator (FSI)

06 - AIR FORCE DESIGNATED CRITICAL SAFETY ITEM (CSI)

All of these items will also be Flight Safety Indicator (FSI)

07 - CHEMICAL BIOLOGICAL DEFENSE EQUIPMENT ITEM (CBDE)(CSI)

U.S. Army Edgewood Chemical Biological Center (ECBC) 46 - FAA Certified

97 - EDGEWOOD CHEMICAL BIOLOGICAL CENTER

U.S. Army Edgewood Chemical Biological Center (ECBC)

98 - NESO

note: ALL NSNs which have an SPC of ‘03’,‘05’ or ‘06’ are considered FSI.

FSI items will not necessarily be an SPC of ‘03’, ‘05’ or ‘06’.

PIC

0:

Place of Inspection Code (PIC)

1 Inspection at Source / Acceptance at Source 2 Inspection at Destination / Acceptance at Destination C Inspection at Source / Acceptance at Source (used for Critical application items) 3 Inspection at Source/ Acceptance at Destination (used for Hazardous Materials) 4 Inspection at Destination/ Acceptance at Source (used for Hazardous Materials)

IUD/RFID

0:

Item Unique Identification (IUID) Radio Frequency IDentification (RFID)

UID/RFID field Values 01 Not Required 02 UID Required 03 RFID Required 04 Both UID and RFID Required

QCC

0:

Quality Control Code (QCC)

QCC -- First Position (Contract Quality Requirements) A Contract Quality Requirements further defined.

Material Master - Additional Data - Internal Comments B Commercial (Any System Offered) C Contractor Responsibility D Standard Inspection E Higher Level Contract Quality F Higher Level Contract Quality - ISO 9001:2000 G Commercial - First Article Testing Government H Contractor Responsibility - First Article Testing Government J Standard Inspection - First Article Testing Government K Higher Level Contract Quality - First Article Testing Government L Higher Level Contract Quality ISO 9001:2000 First Article Testing Government M Commercial - First Article Testing Contractor N Contractor Responsibility - First Article Testing Contractor P Standard Inspection - First Article Testing Contractor Q Higher Level Contract Quality - First Article Testing Contractor R Higher Level Contract Quality ISO 9001:2000 First Article Testing Contractor QCC -- Second Position (Quality Subsystem Identification) A No Quality Subsystem Requirements B Product Verification Testing (PVT) C Measurement and Test Equipment (M/TE) D Certificate of Conformance (CoC) E Product Verification Testing / Measurement and Test Equipment (PVT / M/TE) F Product Verification Testing / Certificate of Conformance (PVT / COC) G Product Verification Testing / Measurement and Test Equipment / Certificate of Conformance (PVT / M/TE / COC) H Measurement and Test Equipment / Certificate of Conformance (M/TE / COC) QCC -- Third Position (Quality Specific Identification) A No Specific requirements B Calibration System Requirements C Quality Assurance Letter of Instruction (QALI) D Pre-award Survey E Post-award Conference F Shelf Life - Depot Storage Standard Actions G Statistical Process Control (SPC) H CIM/IMQIP Controlled Industrial Material / Industrial Material Quality Improvement Program J Deliverable Data - DD 1423 K Two or more codes apply L Local Clause(s) apply M One or more codes and local clause(s) apply N Dermatology and Toxicity (DSCP Medical use) P Additional Requirements - Material Master Additional Data - Internal Comments

FAT

0:

First Article Test Indicator FAT Type 0:

First Article Test Type:

Contractor Government Prod Lot Tst 0:

Production Lot Testing Prod. Lot Testing Type 0:

Production Lot Testing Type:

Contractor Government

AAC

0:

Acquisition Advice Code (AAC)

A Service/Agency-regulated.

B Inventory Control Point (ICP)-regulated C Service/Agency-managed.

D DoD Integrated Materiel-managed, stocked, and issued.

E Other Service-managed, stocked, and issued F Fabricate or Assemble.

G General Services Administration (GSA)/Civil agency.

H Direct Delivery under a central contract.

I Direct Ordering from a central contract/schedule.

J Not stocked, centrally procured.

K Centrally stocked for overseas only.

L Local Purchase.

M Restricted requisitions-major overhaul.

N Restricted requisitioning-disposal.

O Packaged fuels.

P Restricted requisition-Security Assistance Program (SAP).

Q Bulk petroleum products.

R Restricted requisition-Government Furnished Material (GFM) S Restricted requisitioning-Other service funded T Condemned.

U Lead service-managed.

V Terminal item.

W Restricted requisitioning-special instructions> X Semiactive item-no replacement.

Y Terminal item.

Z Insurance/Numeric Stockage Objective item (NSO).

TOR

0:

Technical Operations Review Code (TOR)

A Required after one year and contract recommended.

E Required every time a contract is recommended.

F First Time Buy.

G Logistics Reassignment (LR) Gain.

N Not Required. Review is not required.

Q Required after three months and contract recommended.

S Required after six months and contract recommended.

V Variable, date entered in TOR, contract recommended.

Tech. Ops Review Date MDS 0:

Material Document Status (MDS)

IN - Inspect IP - In Process NR - Not Required PR - Preliminary RE - Re-Evaluate RL - Released RV - Review UA - Unapproved

0:

Product Quality Deficiency Report

Has the item had a PQDR within the previous three years?

QN Types = Z0 Z1 Z4 Open 339 0:

Open Form 339

Is there an open Form 339 for the item?

Crown Jewel 0:

Crown Jewel

Item is identified as an Aviation Supply Chain "Crown Jewel".

BDC

0:

Business Driver Category (BDC)

1 - Forecastable National Item Identification Number (NIIN) and Clothing & Textiles (C&T) Procurement Group Codes (PGC) that rank in either the top 5% of Enterprise or top 5% of each supply chain, on basis of Annual Forecast Value (AFV). In addition, each NIIN in this BDC has a demand in every single month for the past year

2 - Forecastable NIINs and C&T sized PGCs that rank in either the top 5% of Enterprise or top 5% of each supply chain, on basis of AFV. However, NIINs in this BDC have a demand in fewer than all 12 months in the past year

3 - All other forecastable NIINs and C&T PGCs, not included in BDC 1 or 2, that have a demand in every single month for the past year

4 - All other forecastable NIINs and C&T PGCs that are not included in BDC 1, 2, or 3 RMC = "R" assignment criteria:

Three Switches may cause an item to receive an RMC of “R”; Collab, Dominant or Forecastability. Forecastability is the Demand driven criteria for RMC assignment. The Forecastability Switch is turned on when an item receives demand in at least four of the prior thirteen months totaling a minimum of ten units.

Nuclear Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against at least one of these seven WSDCs:

E/I WSDC Weapon System Description

B-2 FMF AIRCRAFT,B-2 BOMBER (ATB)

B-2 FNF SUPPORT EQUIPMENT, B-2 BOMBER

B-2 FOF ENGINE,F118-GE-100 (B-2 BOMBER)

B-52 04F AIRCRAFT, STRATOFORTRESS B-52

B-52 ABF SUPPORT EQUIPMENT, B-52 AIRCRAFT

B-52 AYF ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H)

ICBM 01F MISSILE, MINUTEMAN III, LGM-30

ALCM 36F MISSILE, AIR LAUNCH CRUISE (ALCM) AGM-86B

B-2 Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against at least one B-2 WSDC:

FMF AIRCRAFT,B-2 BOMBER (ATB)

FNF SUPPORT EQUIPMENT, B-2 BOMBER

FOF ENGINE,F118-GE-100 (B-2 BOMBER)

Aircraft FMF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

FMF AIRCRAFT,B-2 BOMBER (ATB)

Support FNF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

FNF SUPPORT EQUIPMENT, B-2 BOMBER

Engine FOF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

FOF ENGINE,F118-GE-100 (B-2 BOMBER)

B-52 Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against at least one B-52 WSDC:

04F AIRCRAFT, STRATOFORTRESS B-52

ABF SUPPORT EQUIPMENT, B-52 AIRCRAFT

AYF ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H)

Aircraft 04F Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

04F AIRCRAFT, STRATOFORTRESS B-52

Support ABF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

ABF SUPPORT EQUIPMENT, B-52 AIRCRAFT

Engine AYF Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

AYF ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H)

ICBM 01F

Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

01F MISSILE, MINUTEMAN III, LGM-30

ALCM 36F

Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

36F MISSILE, AIR LAUNCH CRUISE (ALCM) AGM-86B

NRP

Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

21N Nuclear Reactor Program Ohio Murray, Henry Jr DLA CIV AVIATION:

NIIN is recorded against WSDC:

23N Ohio Class Submarine Army Big 6 Abrams 0:

Army Big 6

M1 Abrams - Main Battle Tank Item is recorded against WSDC-"36A" Apache 0:

Army Big 6

AH-64 Apache Attack Helicopter Item is recorded against at least one of these WSDCs:

5ZA - Helicopter, AH-64A Apache E2A - Helicopter, AH-64E Apache Guardian LBA - Helicopter, AH-64D Apache Longbow QUA - Avionics unique to AH-64 Apache Black Hawk 0:

Army Big 6

UH-60 Black Hawk Utility Helicopter Item is recorded against at least one of these WSDCs:

40A - Helicopter, Black Hawk UH-60A, UH-60L, HH/UH-60M, UH-60V MVA - Helicopter, HH-60L MedEvac TWA - Helicopter, EH-60A Electronic Countermeasures YXA - Helicopter, MH-60K Special Operations Bradley 0:

Army Big 6

Bradley Fighting Vehicle Systems (BFVS) Item is recorded against WSDC-"37A" Howitzers 0:

Army Big 6

Howitzers Item is recorded against at least one of these WSDCs:

23A - Howitzer, M109 155mm Self-propelled 25A - Howitzer, M102 105mm Towed 35A - Howitzer, M198 155mm Towed 57A - Howitzer, M109A6 - NSN:2350013050028 58A - Howitzer, Medium - NSN:2350012775770 59A - Howitzer, M109A5 - NSN:2350012811719 5AA - Howitzer, Medium - NSN:2350010310586 5BA - Howitzer, Medium - NSN:2350010318851 8AA - Howitzer, M109A7 155mm Self-propelled TGA - Howitzer, M119 105mm Light Towed Stryker 0:

Army Big 6

Stryker Infantry Carrier Vehicle Item is recorded against WSDC-"KMA" W.S. Count OSD Fighter F-16 0:

SecDef Fighter Memo

F-16 Fighting Falcon Item is recorded against WSDC-"26F" F-22 0:

SecDef Fighter Memo

F-22 Raptor Item is recorded against WSDC-"PGF" F-35 0:

SecDef Fighter Memo

F-35 Lightning II Item is recorded against WSDC-"DRN"

0:

Secretary of Defense Fighter Memo (aka MC80)

Goal for these fighter platforms is:

Mission Capable at 80% by October2019.

F/A-18A/D 0:

SecDef Fighter Memo

F/A-18A/D Hornet Item is recorded against WSDC-"43N" F/A-18E/F 0:

SecDef Fighter Memo

F/A-18E/F Super Hornet Item is recorded against WSDC-"VUN"

EA-18G

0:

SecDef Fighter Memo

EA-18G Growler Item is recorded against WSDC-"Z5N" W.S. Count AMPL Count Henry J. Murray Jr.:

How many AMPL references are there for this NIIN?

RNVC 1

0:

Reference Number Variation Code (RNVC) Code indicates that a cited reference number is item identifying, is not item identifying, or is a reference number for information only.

1 - A design control reference or other reference number that does not identify an item of production without the use of additional information, or is either a specification, part, type or similar reference number that does not identify an item of supply without the use of additional information.

2 - A design control reference or other reference number that is an item-identifying number for an item of production, or is either a source control reference, a specification or a standard part, type, or similar reference number that is an item-identifying number for an item of supply.

3 - A vendor's reference (part) number on a source control item, as defined in ASMEY- 14.24M and ASMEY-14.100M, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.

8 - A non-item-identifying reference number that is added to a replacement NSN as a result of a cancel-use action on a NSN recorded with ISC 3 or E. It is used to indentify the original item of supply/replaced item. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.

9 - A reference number which was the Design Control Reference for the item of supply concept (Original Design Activity) that is now inactive coded Reference Number Category Code (RNCC) 3; a specification, standard, or other reference number which is superseded, cancelled, obsolete or discontinued and is coded RNCC 5; a reference number for information only coded RNCC 6; a drawing which is the Single Controlling Reference Number (SCRN) coded RNCC 2 or 7; or a drawing number reference coded RNCC D.

RNCC 1

0:

Reference Number Category Code (RNCC) Code that designates the relationship of a reference number to the item of supply.

1 - Source Control Reference.

2 - Definitive Government Specification or Standard Designator Reference.

3 - Design Control Reference.

4 - Non-definitive U.S. Government Specification or Standard Reference.

5 - Secondary Reference.

6 - Informative Reference.

7 - Vendor Item Drawing Reference (formerly specification control reference).

8 - US/NATO-Reproduced Item Identification Number.

A - Design Category Packaging and Related Logistics Data Reference Number.

C - Advisory Reference.

D - Drawing Number Reference.

E - Replaced Reference Number.

Part Number 1 CAGE 1 Vendor 1 RNVC 2 RNCC 2 Part Number 2 CAGE 2 Vendor 2 RNVC 3 RNCC 3 Part Number 3 CAGE 3 Vendor 3 RNVC 4 RNCC 4 Part Number 4 CAGE 4 Vendor 4 RNVC 5 0:

Reference Number Variation Code (RNVC) Code indicates that a cited reference number is item identifying, is not item identifying, or is a reference number for information only.

1 - A design control reference or other reference number that does not identify an item of production without the use of additional information, or is either a specification, part, type or similar reference number that does not identify an item of supply without the use of additional information.

2 - A design control reference or other reference number that is an item-identifying number for an item of production, or is either a source control reference, a specification or a standard part, type, or similar reference number that is an item-identifying number for an item of supply.

3 - A vendor's reference (part) number on a source control item, as defined in ASMEY- 14.24M and ASMEY-14.100M, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.

8 - A non-item-identifying reference number that is added to a replacement NSN as a result of a cancel-use action on a NSN recorded with ISC 3 or E. It is used to indentify the original item of supply/replaced item. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.

9 - A reference number which was the Design Control Reference for the item of supply concept (Original Design Activity) that is now inactive coded Reference Number Category Code (RNCC) 3; a specification, standard, or other reference number which is superseded, cancelled, obsolete or discontinued and is coded RNCC 5; a reference number for information only coded RNCC 6; a drawing which is the Single Controlling Reference Number (SCRN) coded RNCC 2 or 7; or a drawing number reference coded RNCC D.

RNCC 5

0:

Reference Number Category Code (RNCC) Code that designates the relationship of a reference number to the item of supply.

1 - Source Control Reference.

2 - Definitive Government Specification or Standard Designator Reference.

3 - Design Control Reference.

4 - Non-definitive U.S. Government Specification or Standard Reference.

5 - Secondary Reference.

6 - Informative Reference.

7 - Vendor Item Drawing Reference (formerly specification control reference).

8 - US/NATO-Reproduced Item Identification Number.

A - Design Category Packaging and Related Logistics Data Reference Number.

C - Advisory Reference.

D - Drawing Number Reference.

E - Replaced Reference Number.

&"Courier New,Bold"&8DSCR-BAE Page &P of &N &"Courier New,Bold"&8&A / &F

3-Packaging Matrix

NIIN

0:

National Item Identification Number

A National Item Identification Number (NIIN) is a nine-digit code that identifies each item of supply. The first two numbers of the NIIN represent the National Codification Bureau Code. This code identifies the country that entered the item into the supply system. The remaining seven digits are sequentially assigned and serve to individually identify each item in the Federal Catalog System (FCS).

FSC

0:

Federal Supply Class

The Federal Supply Class (FSC) is contained in the first four digits of a National Stock Number (NSN). It is used to identify the general family of equipment into which any item having an NSN, happens to fall.

Link to Cataloging Handbook H2:

http://www.dispositionservices.dla.mil/sales/Documents/Sales/h2book.pdf Supply Chain Profit Center

DSCR:

Profit Center

Managing organization Packaging Spec Review Rqr'd

DSCR:

Review Required?

Derived from all packaging codes;

where any contain a "Z" Pkg Rvw Rqrd

DSCR:

Packaging Review Required?

<Material Master> <Basic Data 1> <Review Codes> Packaging review not yet determined N Packaging review does not apply Y Packaging review required Haz Mat 0:

Hazardous Material Indicator Code (HMIC) Hazardous Materials Information Resource System (HMIRS)

D - No info in HMIRS; table I Fed Std 313, MSDS required.

N - Indicates there is no data in the HMIRS.

P - No info in HMIRS; table II Fed Std 313 & MSDS may be required.

Y - Indicates information is in the HMIRS.

First Dest Pkg

DSCR:

First Destination Packaging Indicator

First Dest Trans

DSCR:

First Destination Transportation Indicator

Pkg Data IAW

DSCR:

Packaging Data IAW:

MIL-STD-2073

Qty Unit Pk

DSCR:

Quantity Unit Pack (QUP)

MIL-STD-2073

Appendix B, Paragraphs B.3 - B.4.2 Appendix J, Paragraph J.4.3 Preserv Method

DSCR:

Preservation Method

MIL-STD-2073

Appendix J, Table J.I or J.Ia Paragraphs 5.2.3 through 5.2.4.8 Clean and Dry

DSCR:

Cleaning and Drying Procedures

MIL-STD-2073

Appendix J, Table J.II Paragraph 5.2.1 Preserv. Matl

DSCR:

Preservative Material

MIL-STD-2073

Appendix J, Table J.III or J.IIIa Application: Paragraphs 5.2.2.1 through 5.2.2.3 Wrapping Matl

DSCR:

Wrapping Material

MIL-STD-2073

Appendix J, Table J.IV or J.IVa Cush & Dunn Matl

DSCR:

Cushioning and Dunnage Material

MIL-STD-2073

Appendix J, Table J.V or J.Va Cush & Dunn Thick

DSCR:

Cushioning and Dunnage Thickness

MIL-STD-2073

Appendix J, Table J.VI Unit Container

DSCR:

Unit Container

MIL-STD-2073

Appendix J, Table J.VII or J.VIIa Intermed Cont

DSCR:

Intermediate Container

MIL-STD-2073

Appendix J, Table J.VII or J.VIIa Intermed Cont Qty

DSCR:

Intermediate Container Quantity

MIL-STD-2073

Appendix B, Table B.I and Paragraphs B.5.1 through B.5.2 Appendix J, Paragraph J.4.11 Level A Pkg

DSCR:

Level A Packing Requirement

MIL-STD-2073

Appendix J, Table J.IX Level B Pkg

DSCR:

Level B Packing Requirement

MIL-STD-2073

Appendix J, Table J.IXa Optional Proc

DSCR:

Optional Procedure Indicator

MIL-STD-2073

Appendix J, Table J.VIIIa Special Marking

DSCR:

Special Marking Code

No Entry ZZ Special Requirements 00 No special marking 01 Fragile 02 Arrow up 03 Method 50 04 Fragile,Arrow up, Method 50 05 Delicate instrument 06 Delicate instrmt & Arrow up 07 Glass - do not drop Spcl Pkging Instruct Num

DSCR:

Special Packaging Instruction Number Spcl Pkg Inst Rev

DSCR:

Special Packaging Instruction Number Spcl Pkg Inst Dt

DSCR:

Special Packaging Instruction Number Palletization

DSCR:

Palletization Required

No Entry Y Yes N No Pkg Table Number

DSCR:

Packaging Determination Table Number

NIJJ0MNNJ - Military Pack Required NIJJ0NNNJ - Commercial Pack Required