13-D10164-US_-_DLA_Installation_Support _Jacksonville _Florida_-_USA.PDF

A3

Name Date

Approved

Checked

Drawn

Please note that this drawing is the exclusive property of

BAN-AIR Storage Systems and no unauthorized copying or use is permitted without prior permission

Drawing number sales@ban-air.com US Toll Free - T: 1-866-890-1864 F: 1-866-890-1865

It is the customer's responsibilty to check building dimensions and verify that these products meet their requirements and fit into the designed area.

Scale:

TM

B A N - A I R S T O R A G E S Y S T E M S http://www.ban-air.com

© Copyright Ban-Air Storage Systems 2013

All rights reserved. Trade Mark and Patent Protected

NON

13-D10164-US

DLA Installation Support, Jacksonville, Florida

- USA

LU 04 JUN 13

MP 04 JUN 13

DLA Installation Support, Jacksonville, Florida - USA

THIS CONFIGURATION IS FOR GUIDANCE PURPOSES ONLY.

PLAN VIEW

Dimensions indicate area needed for this installation - area total is 4800 sq ft

Example of 52" & 96" (W) Adjustable Racking at 16' (H)

Aisle Width Between

Systems Of:

52" x 48"

Ban-Air Standard Duty Racking

15' x 40

(16ft)

MAX BAY LOAD 15,000lbs

96" x 48"

Aisle Width Between

Systems Of:

Ban-Air Standard Duty Racking

15' x 14

(16ft)

All Racking, Pallets & Accessories from Customer Stock

Ban-Air Storage Flow Thru Pallets:

Are constructed from heavy duty steel, and can accommodate up to each. Ban-Air pallets act as the main carrier pallet, reducing wooden pallet requirements and can be slotted into the racking at any height, to guarantee close-stacking and easy access to stock.

2500lbs

: 200

Total Bulk Pallet Positions 2' high average ea: 256

5248FP /M

FP9648/H = 4000lbs

Image for illustrative purposes only

YELLOW:

: 569648FP /HRED:

Racking height(s) on drawing are guidance only and stated as per overall Ban-Air system height, therefore subject to final shimming.

In any case the maximum difference in level between the highest and lowest survey points on a floor in the area occupied by the racking system shall not exceed 1/1000 of the rack length.

SPECIFICATION / DIMENSIONS APPROVED, EXCEPT AS NOTED ON DRAWING, BY:

PRINT NAME

DATE

SIGN

BA04/A

The suitability of the lifting devices in order to work effectively within this configuration has to be determined by customer.

A confirmed order and signed/approved layout drawing(s) are required before manufacture of product can begin. Ban- Air reserve the right to introduce minor variations to our products, which will not effect in any case their functionality nor capability backwards.

Drawing Set:

13-D10164-US