DLA RFID ZEBRA label info4x2.doc

4” x 2” - Ultra High Frequency (UHF) RFID Labels for Uniform Marking for Shipment and Storage RFID Component:

These pressure-sensitive labels include an integrated RFID inlay (integrated chip and antenna) specifically configured for the identified RFID printer hardware: Zebra R110-R170Xi Plus printers. When peeled from the release liner, the RFID inlay must be on the adhesive side of the pressure sensitive label.

Inlay Specifications:

· Chip: Impinj Monza 2 (collectively exhibits range, interference rejection, and orientation insensitivity for reliable tag reads)

· AD-222 Antenna Dimension : 3.74” (94.9 mm) x .310” (7.9 mm)

· Antenna material: Aluminum (recycling-friendly)

· Antenna position in label: .906” +/- .012 (23mm +/- 3 mm) from lead edge of label (top-of-form)

· Chip orientation: Chip First ( chip is in “leading position towards lead edge of label)

· Inlay substrate material and thickness [microns]: Heat-Treated PET, 2 mils [51]:

· Total Thickness over chip (typical) [microns]: 11.5 mils [279]

RF Performance Features:

· RF Protocol: ISO/IEC 18000-6C, EPC Class 1 Gen 2

· Optimized operating frequency: 866-954 MHz (Wide-band/Global)

· Mode of Operation: Passive

· RF Performance: High performance in high-volume corrugated carton labeling applications exhibiting reliable wide-band (global) performance on many difficult to read contents such as metals and liquids.

· Passive RFID tag/interrogator readability requirements: See Mil-Std-129P: Military Marking for Shipment and Storage

Finished RFID Label Specifications:

· Label Size: 4” (101.6 mm) x 2“ (50.8 mm)

· Label Gap/Space between Labels: .125” (3.175mm)

· Label Format: Roll

· Width of Roll: 4.125” ( 104.78 mm) or per Zebra tolerance

· Number of labels per roll: 2,000

· Inner Core Diameter: 3" (76.2 mm)

· Outer roll Diameter: 8" (203.2 mm)

· Space between labels: .125 in. (3.175 mm)

· Perforation: Between Labels in release liner

Label Material:

· Face stock: Thermal Transfer, white, matte coated , caliper-3.2 mils

· Adhesive: Permanent Acrylic , caliper – 0.8 mils

· Release Liner: Caliper- 2.5 mils

· Recommended Max Print Speed: 12" (305 mm) Per Second

· Min Application Temperature: 25° F (-4° C)

· Min Service Temperature: -40° F (-40° C)

· Max Service Temperature: 176° F (80° C)

· Storage Conditions: 72 F at 50% RH Label Use: See mil-prf-61002A, Pressure Sensitive Adhesive Labels for Bar Coding Labels may be used to mark corrugate, packaging films, paper, glass, metals, plastics, etc.