DLA RFID ZEBRA label info4x2.doc

4” x 2” - Ultra High Frequency (UHF) RFID Labels for Uniform Marking for Shipment and Storage

RFID Component:

These pressure-sensitive labels include an integrated AD-223 -RFID inlay (integrated chip and antenna) specifically configured for the identified RFID printer hardware: Zebra R110-R170Xi Plus printers. When peeled from the release liner, the RFID inlay must be on the adhesive side of the pressure sensitive label.

Inlay Specifications:

· Chip: Impinj Monza 3 (collectively exhibits range, interference rejection, and orientation insensitivity for reliable tag reads)

· Inlay Antenna Type: AD-223

· Antenna Dimension : 3.741” (95.03mm) x .321” (8.15 mm)

· Antenna material: Aluminum

· Antenna position in label: 34mm +/- 3mm (1.338” +/- .118”), from lead edge of label to antenna

· Chip orientation (chip/slot first): Chip First ( chip is in “leading position towards lead edge of label)

· Inlay substrate material and thickness [microns]: Heat-Treated PET, 2 mils [51]:

· A PET laminate must be applied over the inlay to reduce electro-static discharge and for mechanical robustness RF Performance Features:

· RF Protocol: ISO/IEC 18000-6C, EPC Class 1 Gen 2

· Optimized operating frequency: 866-954 MHz (Wide-band/Global)

· Mode of Operation: Passive

· RF Performance: High performance in high-volume corrugated carton labeling applications exhibiting reliable wide-band (global) performance

· Passive RFID tag/interrogator readability requirements: See Mil-Std-129P: Military Marking for Shipment and Storage

Finished RFID Label Specifications:

· Label Size: 4” x 2 “ (101.6 mm x 50.8 mm)

· Label Gap/Space between Labels: .125” (3.175mm)

· Label Format: Roll

· Width of Roll: 4.125” ( 104.78 mm) or per Zebra tolerance

· Number of labels per roll: 2,000

· Inner Core Diameter: 3" (76.2 mm)

· Outer roll Diameter: 8" (203.2 mm) or per Zebra tolerance

· Space between labels: .125 in. (3.175 mm)

· Perforation: Between Labels in release liner

Label Material:

· Face stock: Thermal Transfer, white, matte coated ,

· Adhesive: Permanent Label Use: See mil-prf-61002A, Pressure Sensitive Adhesive Labels for Bar Coding. Labels may be used to mark corrugate, packaging films, paper, glass, metals, plastics, etc.