SOW_Retrofit_Chevy_Tahoe.docx

Statement of Work Chevy Tahoe Administration: BLM Nevada State Office Location: BLM Carson City District Office

General:

The BLM Nevada, Carson City District Office has a requirement for the services and supplies to strip a current Law Enforcement Vehicle (LE), 2016 Chevy Tahoe, and install the removed LE parts on onto a new 2021 Chevy Tahoe. This requirement also includes the purchase and installation of new parts and supplies onto the new vehicle to retrofit them into LE vehicle specifications.

Travel:

Due to lack of Law Enforcement resources, the service area must be within 25 miles of the Carson City District Office unless all vehicles will be picked up and dropped off at no additional cost.

Current Vehicle Information:

New Vehicle Information:

Notes on equipment for installations:

The equipment needed for installation will be a combination of new and reused parts. Items that will be reused from existing vehicle are noted below. There may be an unforeseen possibility that some of these items will not work with the new vehicle or are found to be in disrepair once they are removed from the old vehicle. Quotes are not required to reflect this possibility. The BLM will be responsible for the cost of a new part above and beyond the initial quote if any part is found to be unusable at the time of installation. However, the vendor will be required to notify the BLM of any unusable part, suggested replacement part, and obtain approval before purchase and installation.

For all new parts needed to complete the installation, as noted below, the vendor must include manufacturer, model, and itemized price of equipment in the quote. All new parts must meet the below set standards or specific make or model as noted or be equivalent. The BLM has the right to disqualify any part that is deemed not comparable or found to be unsatisfactory.

LED Red/Blue Lights: As noted below, for the LED Red/Blue lights the preferred manufacturers are SoundOff Signal or Code3. The preferred part is the SoundOff Signal model EMPS1STS3(X) or equivalent. Vendor will consult with BLM on preferred placement locations prior to installation.

Task 1: STRIP EXISTING VEHICLE OF LAW ENFORCEMENT EQUIPMENT, 2016 Chevy Tahoe (I620448)

· Remove Existing decals and brown striping

· Plug roof and body holes

· Ensure all OEM equipment and lighting are functioning

· Strip all law enforcement (Non-OEM) parts from truck

· Retain all useful parts for install into new vehicle (listed as PROVIDED below)

· All parts not re-used will be returned to BLM

Task 2: INSTALLATION OF NEW PATROL VEHICLE: 2021 Chevy Tahoe I623709

· FRONT GRILL/HEAVY DUTY BUMPER / FRONT QUARTER PANEL

· Install –Four forward facing Code 3 LED light heads (red/blue with clear lens) with mounts behind grill. (PROVIDED)

· Install - Two side facing LED split light heads, surface mount / low profile lights (red/blue) on left and right quarter panel (PROVIDED).

· Install -Siren speaker behind grill. (PROVIDED)

· Install- Two 6 PAK Hide a Blast LED inserts in headlights or parking light housing (white) (PROVIDED)

· Install - Wig-Wag Flasher Control for Headlights (high beam) (PROVIDED)

· Install- quick disconnect jumper cables (wired to protect emergency lighting)

· ENGINE COMPARTMENT

· Install - Charge guard system to prevent battery drain when minimum voltage is reached (minimum voltage has ability to start truck)

· Install - Circuit breaker, with ability to disconnect emergency equipment from OEM electrical system

· FRONT WINDOW/WINDSHIELD

· Install – 35% High quality Window tinting on front driver and passenger side windows.

· Install – 35% High quality Visor strip window tint on windshield.

· REAR DOOR/TAILGATE

· Install -Two 6 PAK Hide a Blast LED Inserts in taillights (red)(PROVIDED)

· Install - Two red/blue LED lights surface mount / low profile (red/blue) mounted to rear door adjacent to license plate (PROVIDED).

· Install - One red/amber/amber/amber/amber/blue LED light/ traffic advisory bar mounted to interior roof rear window facing to rear (PROVIDED)

· Install – Two 4” white LED Flood backup lights (1200 Lumen minimum per light head, IP68 minimum rated) mounted flush to rear bumper OR on rear door (PROVIDED).

· ROOF

· Install – VHF Radio antenna (PROVIDED)

· Install - “Sat-Rad”/GPS Radio system antenna (dome/disc) (PROVIDED)

· Install – Roof mounted light bar (PROVIDED)

· INSIDE WINDSHIELD / DASH

· Install– 2 x LED Dome light (red/white). Overhead in cargo area and over center console in driver area (PROVIDED).

· Install - Radio mic clip mount x 3 (VHF/PA/SAT) (PROVIDED)

· Install – Cellular Booster 4G/5G and exterior antenna

· CENTER CONSOLE

· Install - Metal floor plate between seats for mounting console

· Install –2021 Tahoe console with 7″ slope and 9″ level area x 34” long with under-dash panel trim and floor plate (preferred Troy)

· Install - Master console power auto-off timer (PROVIDED)

· Install - Motorola XTL mobile radio (PROVIDED)

· Install - Single Unit Siren control box (PROVIDED)

· Install - PA mic/system (attached to siren control box)(PROVIDED).

· Install – Flexible LED Map light (red/white) mounted to console (PROVIDED).

· Install– Satellite Radio / mic.(PROVIDED)

· Install – Control Switch Box 6 Rocker switches (PROVIDED) in /on console for:

· Rear bumper backup lights

· Rear brake light cutouts

· Install - 12-volt, 3 plug auxiliary power port x2 (one mounted on center console, one mounted in rear cargo area to panel)(PROVIDED)

· Install – Flush mount 2 port USB charge socket to center console (PROVIDED).

· Install – Streamlight Ultra Stinger LED flashlight and charger (PROVIDED).

· Disconnect - Door chime (If applicable).

· BEHIND CONSOLE

· Install – Rifle and shotgun custom mount and 2 locks with a 10 second timer. Some modification may be necessary to current gun racks to be used (PROVIDED)

· Install –2 Switches that unlock both gun locks simultaneously, one accessible by driver on center console, the second accessible by the passenger mounted under the dash.

· Disable gun locks without key in ignition

· BEHIND FRONT PASSENGER SEAT

· Install half prisoner transport cage in right rear passenger seat, to include installation of steel window barriers on all windows accessible from transport cage. The preferred product is manufactured by Setina, OR Equivalent.

· REAR CARGO AREA (SUV)

· Install – Install locking truck vault cargo box (PROVIDED)

· Install – Cargo Screen behind last row of seats and cargo area

· Install Fire Extinguisher (PROVIDED) with heavy duty mount (NOT PROVIDED).

· Install- Two total 6 LED split light head Red / Blue in rear cargo area window visible to side (PROVIDED)

· Provide Master auxiliary power/fuse block or box for all aftermarket electronics to access fuses (all fuses labeled) that is easily accessible.

· Install LED Dome light (red/white) overhead in rear cargo area (PROVIDED)

· VEHICLE EXTERIOR

· Install vinyl decals and brown stripe on exterior of vehicle (PROVIDED).