Solicitation N0017423Q0067 - Tomahawk Lead Discs.pdf

NSWC IHD

RECEIVING

4522 MCMAHAN ROAD B116

INDIAN HEAD MD 20640-5125

TEL: 301-744-4221 FAX:

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

N0017423Q0067 21-Jun-2023 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ X[ ] IS [ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

NSWC INDIAN HEAD

ATTN: DEANNA WILSON

4081 N. JACKSON RD. RM 221

INDIAN HEAD MD 20640

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ]X FOB

DESTINATION

[ ] OTHER

(See Schedule)

07-Jul-2023(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

301-744-6891DEANNA L WILSON

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot FAT - Tomahawk Lead Discs

FFP

First Article Testing FOB: Destination VENDOR PART NR: FAT Tomahark Lead Discs

PSC CD: 5335

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1,000 Each Tomahawk Lead Discs

FFP

FOB: Destination VENDOR PART NR: Tomahark Lead Discs

PSC CD: 5335

NET AMT

Section C - Descriptions and Specifications

SOW

STATEMENT OF

WORK

FOR

LEAD DISC

1.0 GENERAL

1.1 Introduction

The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), requires contractor support for the manufacture of Lead Discs.

1.2 Scope

The Contractor shall fabricate, test, inspect and deliver complete Lead Discs.

2.0 APPLICABLE DOCUMENTS

The Contractor is responsible for meeting the requirements of every applicable specification documented in any product documentation of this Statement of Work (SOW) and drawing package. The documents listed are of the issue in effect on the date of invitation for bids or request for proposals and form a part of this SOW to the extent herein.

The Contractor shall provide complete Lead Discs in accordance with the following drawing:

Drawing 7428302

2.1 General Specifications

Document Number Document Title ASME Y14.5 Dimensioning and Tolerancing, Engineering Product Definition and

Related Documentation Practices ASQ/ANSI Z1.4 Sampling Procedures and Tables for Inspection by Attributes

Copies of the ASME document are available online at https://asme.org or from The

American Society of Mechanical Engineers (ASME), 150 Clove Road, 6th Floor, Little Falls, NJ 07424-2139.

Copies of the ASQ document are available online at https://asq.org or from the American Society for Quality (ASQ), 600 North Plankinton Avenue, Milwaukee, WI 53203.

2.2 Product Documentation

The specifications and drawings relating to the Lead Disc are listed below in paragraphs

2.2.1 and 2.2.2.

2.2.1 Product Specification

Document Number Document Title QQ-A-1876 Federal Specification, Aluminum Foil SAE AMS4011 Aluminum, Foil and Light Gage Sheet, 99.45 Al (1145-0), Annealed

Copies of the SAE document are available online at https://sae.org or from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001.

Copies of standards can be obtained from:

Naval Surface Warfare Center, Indian Head Division Attn: Samuel Meyers Code M41SM

NSWC IHD

2575 Strauss Avenue Building 3137 Indian Head, MD 20640 301-744-1621 Samuel.d.meyers3.civ@us.navy.mil

2.2.1.1 Exceptions to the Product Specifications Documentation

There are no exceptions to the product specifications documentation.

2.2.2 Product Drawings

Document Number Document Title

7428302 Disc, Lead

2.3 Data Item Descriptions

A First Article Test/Inspection Procedures and Plan (CDRL A001), First Article Test Report (CDRL A002), and Lot Acceptance Test Report (CDRL A003) are required by this

SOW.

CDRL

Number Document Number Document Title

A001 DI-NDTI-82327 First Article Test/Inspection Procedures and Plan

(FAT/IPP)

A002 DI-NDTI-80809B First Article Test Report A003 DI-NDTI-80809B Lot Acceptance Test Report A004 DI-CMAN-81590 Request for Deviation

Application for copies of the data item descriptions referenced by the CDRLs should be addressed to the Superintendent of Documents, Government Printing Office, Washington, DC, 20420.

2.4 Conflicting Document Requirements

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Attachment (N) (Page 2 of 7)

If there are any conflicts noted between the aforementioned publications, drawings or inspection requirements listed herein, the Contractor shall notify the Government TPOC, as identified in section 4.0 of this SOW, in writing for interpretation, clarification, and resolution.

3.0 REQUIREMENTS

3.1 General

The Contractor shall fabricate, inspect, and deliver Lead Discs as described in this SOW. The Contractor shall provide, design and/or fabricate all necessary tooling to manufacture and dimensionally inspect the units, and provide data as detailed herein. Other documentation and support shall be provided as requested by the Government.

3.2 Classification of characteristics

Characteristics verified by the inspections and tests specified herein are classified in accordance with Drawing 7428302.

3.3 Fabrication and Test

3.3.1 Manufacturing Process

The Contractor shall maintain and control manufacturing processes to fabricate, inspect, and deliver Lead Discs as described in this SOW. The processes should cover all phases from the ordering of raw materials to the Government acceptance of the finished product. All parts shall be manufactured in accordance with the drawing referenced in this SOW. Once the First Article of an item is accepted, the Contractor shall not change sub-contractors without prior approval from the Government. Note: additional testing may be required before approval can be granted.

3.3.2 Production Units Certification

The Contractor shall submit a First Article Test/Inspection Procedures and Plan, First Article Test Report, and Lot Acceptance Test Reports certifying that the production units meet all requirements as specified in this SOW and product documentation, as referenced in paragraph

2.2. The Government reserves the right to request inspection and/or test results associated with certifying the units. This additional documentation shall be kept by the Contractor until further notification is received from the Government. The Contractor shall provide first article and lot acceptance inspection data and certification in accordance with required drawing listed in this section and specifications:

QQ-A-1876: “Federal Specification, Aluminum Foil” AMS4011D: “Aluminum, Foil and Light Gage Sheet, 99.45 Al (1145-0), Annealed” ASQ/ANSI Z1.4-2003 (R2018): “Sampling Procedures and Tables for Inspection by

Attributes” ASME Y14.5-2018, “Dimensioning and Tolerancing, Engineering Product Definition and Related Documentation Practices”

Attachment (N) (Page 3 of 7)

3.3.3 Production Units Traceability

The Contractor shall keep traceability records of the raw material lot numbers that are used in each production unit lot.

3.3.4 Production Lot Formation

The production lot formation requirements are specified herein. A production lot is defined as a lot consisting of completed units that were fabricated from the same materials, using the same processes/procedures, and under the same conditions.

3.4 Quality Control

3.4.1 Quality System and Quality Control Processes

The Contractor shall maintain a quality system, associated certification(s) of analysis and test/inspection results. The Contractor shall maintain quality and process controls that will be used to ensure that the production unit will be in compliance with the applicable drawings, specifications, and this SOW. The Contractor shall maintain documentation and processes that will be used to identify, record, and disposition of non-conforming material, in-process rejects/reworks and characteristic discrepancies. This documentation shall be kept by the Contractor until further notified by the Government.

3.4.2 Inspection of Product

Final acceptance by the Government will occur at the Government’s facility. The Government will approve of the First Article Test Plan prior to the start of testing. Acceptance of the First Article Test samples will only occur after the First Article Testing has been completed and passed, and the Government approves the First Article Test Report. Acceptance of the production lot will only occur after Lot Acceptance Testing has been completed and passed, and the Government Receipt Inspection performs inspection of the products to verify the Lot Acceptance Report provided by the Contractor. The Contractor is responsible for the performance of all inspection requirements as specified herein unless otherwise noted. The Contractor shall utilize best engineering practices and design a test procedure to ensure that the end item meets requirements identified in the drawings.

3.4.2.1 First Article Acceptance Requirements

First Article Acceptance shall consist of the Contractor’s inspection(s)/test(s) and the Government’s inspection and acceptance of the test report. Sample size shall be twenty-five (25) each. Inspection/testing shall be in accordance with drawing 7428302. The Government reserves the right to witness any or all of the inspections/testing. The Contractor is responsible for creating and submitting a First Article Test Plan in accordance with paragraph 4.1.1. The Contractor is responsible for creating and submitting a First Article Test Report in accordance

Attachment (N) (Page 4 of 7) with paragraph 4.1.2. First Article samples shall meet the requirements in order for the Government to approve the first article test.

3.4.2.2 Lot Acceptance Requirements

Lot Acceptance shall consist of the Contractor’s and Government’s inspection(s)/test(s). Sample size and inspection/testing shall be in accordance with Drawing 7428302. The Government reserves the right to witness any or all of the inspections/testing. The Contractor is responsible for creating and submitting a Test/Inspection Report in accordance with paragraph 4.1.3. The Government may perform additional Lot Acceptance inspections/tests outside of the Contractor’s test plan at the Government’s discretion and cost. Lot Acceptance samples shall meet the requirements of these tests as well in order for the Government to approve the production lot.

3.4.2.3 Disposition of Test Samples

Any First Article or Lot Acceptance test samples procured under this contract which are destructively tested should not be included in net deliverable quantities.

3.4.3 Government Inspection of Facilities

The Government, through any authorized Government representative, may visit/inspect the plant or plants of the Contractor, or of any subcontractors, engaged in the performance of this contract.

If any examination/test is scheduled by the Government on the premises of the contractor/ subcontractor, the Contractor and any subcontractors shall provide all reasonable facilities and assistance for the safety and convenience of the Government inspectors in the performance of their duties. All examinations and tests by the Government shall be performed in such a manner as will not unduly delay work.

4.0 REPORTING REQUIREMENTS

4.1 Documentation

The paragraph below describes the documentation that is required from the Contractor.

4.1.1 First Article Test Plan

The Contractor shall provide a First Article Test Plan in accordance with CDRL A001.

4.1.2 First Article Test Report

The Contractor shall provide a First Article Test Report in accordance with CDRL A002.

4.1.3 Lot Acceptance Test Report

The Contractor shall provide a Lot Acceptance Test Report in accordance with CDRL A003.

4.1.4 Requests for Deviations

Attachment (N) (Page 5 of 7)

The Contractor is responsible for preparing and submitting all Requests for Deviation (RFD). A single RFD shall be submitted for each proposed change to the engineering requirements as specified on any product documentation, this SOW, and/or contract. Each RFD shall contain, at a minimum, a description of the deviation, need for the deviation, proof/reason the change will not hinder any other requirement, and the corrective action taken. An RFD shall also be required to document an as-built, discrepant configuration in accordance with CDRL A004. RFDs should be submitted to:

Naval Surface Warfare Center, Indian Head Division Attn: Seung Hyun Code M21SH

NSWC IHD

2575 Strauss Avenue Building 3137 Indian Head, MD 20640 301-744-4196 Seung.hyun@navy.mil

5.0 SECURITY

All deliverables associated with this SOW are “unclassified.”

6.0 DISCLAIMER

All reports delivered under this SOW shall contain the following disclaimer statement:

“The views, opinions, and findings contained in this report are those of the author(s) and should not be construed as the official Department of the Defense (DOD) position, policy, or decision unless so designated in other official DOD documentation.”

7.0 CONTROLLED UNCLASSIFIED INFORMATION (INCLUDES FOR

OFFICIAL USE ONLY INFORMATION)

Ref: (a) DoD Regulation 5200.01-V4, DoD Information Security Program

(b) SECNAV M-5510.36, DON Information Security Program Manual Contractor may be required to handle Controlled Unclassified Information (CUI). There are numerous types of CUI, e.g. documents with limited distribution statements, documents marked as For Official Use Only (FOUO), etc. The minimum level of protection for all CUI is adherence to FOUO protection standards. Distribution Statements (DS) and warning labels, such as the Arms Export Control Act Warning, identify additional protection requirements for a given document.

Minimum FOUO protection requirements/controls applicable to the performance of this contract for CUI are listed below. Additional protection requirements, as marked on a given CUI document, are in addition to the standards listed.

7.1. Handling/Storage: Access to FOUO is limited to those needing it to conduct official business for the Department of Defense (DoD). FOUO information is not classified information, but

Attachment (N) (Page 6 of 7)

N0017423Q0067

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Attachment (N) (Page 7 of 7) requires extra precautions to ensure it is not released to the public. During business hours, reasonable steps shall be taken to minimize risk of access by unauthorized personnel. After business hours, FOUO information shall be stored in unlocked containers, desks, or cabinets if Government or Government-contracted building security is provided. If it is not, store in locked desks, file cabinets, bookcases, locked rooms, or similar items.

7.2. Transporting/Transmitting/Release/Destruction: FOUO information shall be transported in a manner that prevents disclosure of the contents. FOUO information may be sent via USPS first-class mail, parcel post, or – for bulk shipments – 4th class mail. Electronic transmission of FOUO information (voice, data, or facsimile) shall be by approved secure communications systems. Transmission via unsecure fax is acceptable if an authorized person is standing by on the receiving end to take custody. All emails containing FOUO or attachments with FOUO must be digitally signed and encrypted when transmitted within a Navy network or to an approved Contractor email address. Transmission of FOUO (i.e. any CUI) to personal email accounts (e.g. AOL, Yahoo, Hotmail, Comcast, etc.) is strictly prohibited.

FOUO sent out of the Contractor’s facility electronically must be encrypted (DoD FIPS 140-2 standard). FOUO material shall not be released outside the Contractor’s facility except to representatives of DoD. When no longer needed, destroy FOUO by a method that precludes its disclosure to unauthorized individuals.

7.3. Markings: Unclassified documents (paper or electronic) generated in support of this contract which contain FOUO are to be marked “For Official Use Only” at the bottom on the outside of the front cover (if any), on each page containing FOUO information, and on the outside of the back cover (if any). Each paragraph containing FOUO information shall be marked as such. Within a classified document, an individual page with both FOUO and classified information shall be marked at the top and bottom with the highest security classification of information appearing on the page. Individual paragraphs shall be marked at the appropriate classification level, as well as unclassified or FOUO, as appropriate. Within a classified document, an individual page that contains FOUO information but no classified information shall be marked “For Official Use Only” at the top and bottom of the page, as well as each paragraph that contains FOUO information. Other records, such as photographs, films, tapes, or slides, shall be marked “For Official Use Only” or “FOUO” in a manner that ensures that a recipient or viewer is aware of the status of the information therein. DS on technical documents identify access restrictions. DS “B” through “D” preclude public release and while not marked as FOUO, are subject to all FOUO protection requirements, including the prohibition on unencrypted transmission over the public Internet.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government

CLAUSES INCORPORATED BY FULL TEXT

E-246-H020 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (OCT 2018)

The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ASQ/ANSI/ISO 9001:2015 “Quality Management Systems – Requirements” and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall flow down such standards, as applicable, to lower-tier subcontractors under instances covered in FAR 52.246-11(b) or at the direction of the Contracting Officer. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements.

(End of text)

E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019)

Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative.

E-246-W001 CERTIFICATE OF ANALYSIS (NAVSEA) (OCT 2018)

(a) A certificate of analysis/test showing that the material has been sampled and/or tested and found to be within the minimum requirements of the specification/drawing/contract shall be submitted to the COR or TPOC. The certificate shall be maintained by the contractor for a minimum of one (l) year; one (1) copy to accompany the shipment (in the packing list envelope) and one (1) copy mailed at time of the shipment (mark the certificate to the attention of: Code 00Q).

(b) Each certificate must be traceable to the material covered by the certificate. The certificate shall state, above the signature of a legally authorized representative of the company the following:

This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.

(c) Beneath the signature include the typed name of the individual signing this certificate.

(d) Certificate for shipments of bulk chemicals shall state contract number, drawing or specification number, lot number, rail car number if shipped by rail or trailer number if by truck, and the date of shipment.

(e) Any demurrage accrued as a result of detaining commercial carriers because of nonreceipt of the certificate shall be the responsibility of the Contractor.

(f) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.

(g) The certificate shall read as follows:

I certify that on ______ [insert date], the ____ [insert Contractor’s name] furnished the supplies called for by the Order/Contract No._____ via ____ [Carrier] on ________ [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies have been sampled and/or tested and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this or on the attached acceptance document.

Date of Execution: ________________________________ Signature: _______________________________________ Typed Name: ____________________________________ Title: ___________________________________________

E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)

(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.

(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following:

This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.

(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.

(d) The certificate shall read as follows:

I certify that on ______ [insert date], the ____ [insert Contractor’s name] furnished the supplies called for by the Order/Contract No._____ via ____ [Carrier] on ________ [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.

Date of Execution: ________________________________ Signature: _______________________________________ Typed Name: ____________________________________ Title: ___________________________________________

E-246-W006 SAMPLING OF RECEIVED MATERIAL – ORDNANCE MATERIAL AND ORDNANCE

COMPONENT PARTS (NAVSEA) (MAY 2021)

(a) When NAVSEA, Naval Surface Warfare Center Indian Head Division receipt inspects ordnance material and/or ordnance component parts, under this contract, for rockets, missiles and their related component parts; the sampling plan utilized shall be as outlined in the technical data package or as otherwise specified in other applicable controlling documentation. If the sampling plan is not specified within any applicable controlling documentation, the sampling plan and the sampling size shall be as outlined in the specification checked below:

ASQ Z1.4 (ANSI/ASQ Z1.4 -2003 (R2018):

Critical: 100% Major: General Inspection Level 1, AQL 6.5 Minor: General Inspection Level 1, AQL 6.5

ASQ Z1.9 (ANSI/ASQ Z1.9 -2003 (R2018)):

Critical: 100% Major:

Minor:

MIL-STD-1916 (DTD 1 APR 96 with NOTICE 2 DTD 5 JUN 14):

Critical: 100% Major:

Minor:

OTHER: [Insert Applicable Specification] Critical: 100% Major:

Minor:

(b) In all cases the acceptance number of defects will be ZERO (0), the entire lot will be rejected for any defect unless specifically otherwise specified by the inspection type and code.

(c) Notwithstanding the above, NAVSEA, Naval Surface Warfare Center Indian Head Division may, at its discretion, accept a defect on an approved waiver on a case-by-case basis.

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 5 wks. ADC 1 NSWC IHD

RECEIVING

4522 MCMAHAN ROAD B116

INDIAN HEAD MD 20640-5125

301-744-4221 FOB: Destination

N00174

0002 5 wks. ADC 1,000 (SAME AS PREVIOUS LOCATION)

FOB: Destination N00174

Section G - Contract Administration Data

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232- 7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Reports (Combo) Desintation / Destination

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice and Receiving Reports (Combo) Desintation / Destination

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N62838

Issue By DoDAAC N00174

Admin DoDAAC** N00174

Inspect By DoDAAC N00174

Ship To Code N/A

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”)

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

Send additional notifications to: luccien.fitzpatrick@navy.mil For invoicing questions: NAVSEA.NSWC.IHEODTDVendorPay@navy.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN 2019)

(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal.

Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Should the subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer.

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein.

G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (JUL 2021)

(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods.

Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the [insert activity name]. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor’s expense with no cost or liability to the U.S. Government.

(b) The federal Government observes public Holidays that have been established under 5 U.S.C. 6103. The actual date of observance for each of the holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link:

https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/.

(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.

(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy. Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company’s established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.

(e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance.

(f) The hours of operation are as follows:

AREA FROM TO

Building 116 0730 – 1130 1230 – 1530

(g) All deliveries to the Receiving Officer, BLDG 116, shall be made Monday through Friday from 0730 - 1130 to 1230 – 1530, local time. Deliveries will not be accepted after 1530. No deliveries will be accepted on federal government holidays.

POC

The following contacts are provided for this contract:

Contract Administrator: Deanna Wilson Phone Number: (301) 744-6891 E-mail: deanna.l.wilson27.civ@us.navy.mil

Payments/Invoicing: Comptroller Vendor Pay Phone Number: (301) 744-6998 E-mail: NAVSEA.NSWC.IHEODTDVendorPay@navy.mil

Technical Representative: Luccien Fitzpatrick E-mail: luccien.fitzpatrick@navy.mil

Technical Representative: Samuel Meyers E-mail: samuel.d.meyers3.civ@us.navy.mil

Any concerns regarding your contract, should be directed to the above mentioned personnel, or the Contracting Officer Marlene Ridgell at (301) 744-6617 or by email at marlene.l.ridgell.civ@us.navy.mil.

Section H - Special Contract Requirements

H-246-H001 CALIBRATION SYSTEM REQUIREMENTS (NAVSEA) (FEB 2023)

(a) Definitions:

(1) All definitions, with the exception of Commercial Service Provider, are found in OPNAVINST3960.16 (series).

(2) Commercial Service Providers. Suppliers of tools, instruments, fixtures, test, measurement, and diagnostic equipment, including original equipment manufacturers, who may calibrate their own products but are not engaged in calibration as a major line of business, and other commercial laboratories that provide either calibration services in support of Navy contracts, or low volume, model specific, or unique parameter calibration services.

(b) The accuracy of Navy and Contractor calibrated equipment used for quantitative and qualitative measurements are ensured through measurement traceability. The Contractor is required to ensure that all calibrated equipment used for quantitative or qualitative measurements required for the research, design, test, production, and maintenance of NAVSEA systems will be maintained and calibrated in accordance with references OPNAVINST

3960.16 and NAVSEAINST 4734.1. Calibration sources shall be accredited by a U.S. based, Navy approved accreditation body to U.S. national standards:

(1) ANSI/NCSL Z540.3, Requirements for the Calibration of Measuring and Test Equipment, dated 3 Aug 2006; or

(2) ISO/IEC 17025:2017, General Requirements for the Competence of Testing and Calibration Laboratories (3rd Edition), dated 29 Nov 2017; or

(3) Certified by the U.S. Navy to NAVSEA 04-4734, Navy and Marine Corps Calibration Laboratory Audit/Certification Manual.

(c) ISO/IEC 17025:2017 and ANSI/NCSL Z540.3 accreditations must be performed by a U.S. based accreditation body. Calibration accreditation must include the parameters required to execute the calibration at appropriate ranges and tolerances. A calibration certificate meeting the requirements of ANSI/NCSL Z540.3 or ISO/IEC 17025:2017 must be provided with the returned calibrated unit. The calibration certificate must be evaluated to confirm that the calibration was performed within the laboratory's accreditation scope and that each calibration measurement met or exceeded a 4:1 Test Uncertainty Ratio (TUR).

(d) Certification to Navy standard NAVSEA 04-4734, is acceptable in place of ANSI/NCSL Z540.3 and ISO/IEC 17025:2017 accreditations. For activities certified to NAVSEA 04-4734, calibrations must be evaluated to confirm that the calibration was performed within the laboratory’s NAVSEA scope of certification, and calibration event records shall be provided to the Government upon request. Calibration intervals that deviate from NAVSEA OD 45845, Metrology Requirements List (METRL), shall reflect Test, Measurement and Diagnostic Equipment (TMDE) end of period reliability greater than 85%. TMDE reliability data shall be provided upon request. TURs shall be greater than or equal to 4:1, or ensure a Probability of False Acceptance (PFA) of 2% or less and a Probability of False Rejections (PFR) of 15% or less. Measurement traceability, including TUR, PFA, and PFR shall be documented in accordance to MIL-STD-1839. Calibration procedures, methods, and measurement traceability used by the Contractor shall be provided to the Government upon request.

(e) All calibrations supporting this contract shall meet the requirements of OPNAVINST 3960.16. If the Contractor executes, subcontracts or outsources the initial or reoccurring calibration of calibrated equipment, the respective calibration laboratory, and all of their employees who perform calibration or supply calibrated equipment, shall be certified or accredited to the requirements of paragraphs (b), (c), and (d).

(f) Contractors electing certification to NAVSEA 04-4734 will contact the Contracting Officer’s Representative (COR) or Technical Point of Contact (TPOC) within 60 days of contract award, who will then contact the NAVSEA09MM METCAL Technical Warrant Holder (TWH), at NAVSEA_METCAL_INSERVICE@us.navy.mil, to begin the Navy certification process.

(End of Text)

VPP CLAUSE

1. Voluntary Protection Program:

1.1. In August 2006, Indian Head Division (IHD) Naval Surface Warfare Center (NSWC) was nominated to participate in the DoD Voluntary Protection Program Center of Excellence Implementation Initiative of the Defense Safety Oversight Council (DSOC). The Voluntary Protection Program (VPP) was established by the Occupational Safety and Health Administration (OSHA) in 1982 to recognize and promote effective worksite-based safety and health management systems. IHD NSWC, through the utilization of VPP, desires to be a model of safety and health excellence. VPP's emphasis on trust and cooperation between OSHA, the employer, employees, employees representatives, and contractors complements the Agency's enforcement activity but does not take its place. All parties, including Contractors, are to work together to identify and resolve any safety and health problems that may arise, yet obtain Contracting Officer approval of any changes that would impact the terms of the contract. IHD NSWC as the VPP participant develops and implements systems to effectively identify, evaluate, prevent, and control occupational hazards so that injuries and illnesses to employees and contractors are prevented. Contractor and sub-contractor personnel are subject to occupational safety and health oversight. This oversight will be accomplished by IHD NSWC personnel and Contracting Officers. Contractors, sub-contractors, and their employees, while in performance of a contractual action on-site within the geographical boundaries of Naval Support Facility (NSF) Indian Head, shall be subject to the requirements of the IHDIVNAVSURFWARCENINST 5100.22, “Safety Manual” regardless of the type or duration of the contract.

Appendix 13-A, of the chapter 13 entitled “Contractor Safety Requirements When Performing Work at the Naval Support Facility (NSF) Indian Head, MD” shall be signed by the Contractor prior to commencement of services on-site at NSF Indian Head. The Contractor shall maintain one signed copy for future reference in educating its personnel and sub-contractors. A second signed copy shall be provided to the Contracting Officer to be maintained in the contract file. If an occupational safety or health related injury or illness occurs during the performance or as a result of this contractual action, the Contractor shall notify the Contracting Officer Representative (COR) as soon as practicable, who will notify the Safety Office and the Contracting Officer. 1.2 In support of VPP and in compliance with Chapter 13 of the Safety Manual, entitled “Contractor Safety,” all Contractors performing on-site at NSF Indian Head shall comply with the following:

1.2.1 Public Law 91-596 (and Amendments), also known as the Occupational Safety and Health Act of 1970, establishes that all employers, including Contractors, are responsible, as far as possible, for providing every employee a safe and healthful working environment. All employers, including Contractors, shall conform to the standards as issued by OSHA. Contractors are responsible for complying with safety requirements specified in the contract as well as all Federal, State, and local safety and security regulations. Non-compliance may be cause for the removal of a Contractor or any Contractor employee from the activity and such non-compliance may form the basis for contractual action, up to and including termination for default.

1.2.2 Contractor personnel shall participate in basic safety awareness and hazard identification training offered by the Government activity at the work area they are supporting. Contractors performing on-site shall attend area weekly safety meetings and annual safety stand-downs, as determined by the COR.

1.3 The best Safety and Health Programs involve every level of the organization, instilling a safety culture that reduces accidents for workers and improves the bottom line for managers. When Safety and Health are part of the organization and a way of life, everyone wins. IHD NSWC is committed to safety excellence. The Contractor shall familiarize itself with the IHDIVNAVSURFWARCENINST 5100.22, “Safety Manual,” Appendix 13-C entitled “OSHA Voluntary Protection program (VPP) Fundamentals Training for Contractors”.

2. Contractor On Site Training:

2.1 A Contractor providing support on-site at any IHD NSWC site may be required to have its on-site Contractor personnel participate in training covering rules, practices, procedures, equipment and systems, as needed, based on the type of support being provided. This training may include, but is not limited to: Operation Security training (OPSEC); Personally Identifiable Information training; DoD Information Assurance Awareness training;

Information Technology Security; Voluntary Protection Program (VPP) training; and Personnel Security training.

2.1.2 This training will be provided at no cost by the IHD NSWC site and will take place on-site during normal contract working hours without any additional compensation for the Contractor. This training does not relieve the Contractor of its responsibility to train its employees in such areas as environment, health, safety, security, sexual harassment, ethics, etc. to ensure compliance with all federal, state, and local laws and DoD regulations.

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance OCT 2018 52.204-27 Prohibition on a ByteDance Covered Application JUN 2023 52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, or Proposed for Debarment

NOV 2021

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.211-17 Delivery of Excess Quantities SEP 1989 52.219-6 Notice Of Total Small Business Set-Aside NOV 2020 52.219-13 Notice of Set-Aside of Orders MAR 2020 52.232-1 Payments APR 1984 52.232-8 Discounts For Prompt Payment FEB 2002 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.233-1 Disputes MAY 2014 52.234-1 Industrial Resources Developed Under Title III, Defense

Production Act

SEP 2016

52.239-1 Privacy or Security Safeguards AUG 1996 52.243-1 Changes--Fixed Price AUG 1987 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.247-34 F.O.B. Destination NOV 1991 52.249-1 Termination For Convenience Of The Government (Fixed

Price) (Short Form)

APR 1984

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7009 Limitations on the Use or Disclosure of Third-Party

Contractor Reported Cyber Incident Information

JAN 2023

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information

JAN 2023

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements MAR 2022 252.204-7020 NIST SP 800-171 DoD Assessment Requirements JAN 2023 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.239-7000 Protection Against Compromising Emanations OCT 2019 252.239-7018 Supply Chain Risk DEC 2022 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

JAN 2023

252.246-7008 Sources of Electronic Parts JAN 2023

52.213-4 TERMS AND CONDITIONS--SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES) (MAR 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses that are incorporated by reference:

(1) The clauses listed below implement provisions of law or Executive order:

(i) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113…