SOLE SOURCE_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k)

Ref: FAR 13.106(b)

The service or material listed on (Document number) 01129614 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: _MetalTek International

Manufacturer POC & Phone Nr._POC: Max Leibfried, PH# 262-544-8239

Mfr. Address_905 East St. Paul Avenue Waukesha WI 53188-3898

Manufacturers Dealer/Rep

Dealer/Rep Address/Phone Number

X_ Description of the item or service required, the estimated cost, and required delivery date.

3 (each)_Centrifugally cast rudder stock lower bearing sleeve. Material is ASTM A494-18A, Grade M30C. OD: 21.031” +0.063” / -0”. ID: 18.828” +0” / -0.063”. Length: 69.125” +0.250” /

-0”. Estimated cost:

X_ Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

Sole source justification is NAVSEA letter 05Z/055 dated 22 January 2020.

X_ The requested material or service represents the minimum requirements of the

Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

A patent, copyright, or proprietary data limits competition. The proprietary data is:

These are “direct replacements” parts/components for existing brand name equipment.

Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT

TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT

THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION

Contracting Officer Signature Date

DLA Maritime Puget Sound Justification for Sole Source 05/21/2018