SOL -Specifications.docx
DOCX document 19 KB Posted
- Attached to
- Combine (Lease to Own) Federal contract opportunity
- Solicitation number
- 12805B22Q0196
About this file
This document contains a specifications sheet for a combine tractor and a related federal contract opportunity solicitation.
The specifications sheet outlines the minimum requirements for a combine tractor, including an engine producing 130 HP or more that meets Tier 4 emissions standards. The tractor must have a 66-gallon fuel tank, 33-gallon hydraulic reservoir, and dimensions of 99" wheelbase, 11" ground clearance, and 124" transport height. The threshing and separation system requirements include a 15.5" diameter rotor up to 1200 RPM and adjustable concave clearance from 1/8" to 1-1/4". The opportunity solicitation is for the lease-to-own of a combine to meet the requirements detailed in the specifications sheet. Quotes are due by May 19, 2022 to the USDA Agricultural Research Service located in Fargo, North Dakota.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Bid schedule..docx | DOCX document | |
| Sol Open Product.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications Combine Tractor – Minimum specifications.
(Brand Name or Equal)
8514.57 Rev NS U/M EA
R1 BASE COMBINE 2022
1.00000
ENGINE PACKAGE
Engine
* 130 HP QSF 3.8 Cummins - turbocharged 4 cylinder
* Tier 4 Final emissions compliant Cooling package
* Radiator, charge air, & hydraulic coolers
* Hydraulic driven reversible fan Fuel tank - 66 gallons stainless steel DEF (Diesel Exhaust Fluid) tank - 5 gallons Multi-pad pump drive for efficient/compact hydraulic pump mounting
* Hydraulic reservoir - 33 gallons Air Compressor Package
CHASSIS
Machine dimensions
* Wheelbase - 99"
* Wheel track - configurable from 60" to 80" center to center spacing
* Ground clearance - 11"
* Break-over angle - 20°
* Gross vehicle weight
- With 60" Floating Standard Auger Header - 15,500lbs
- With 2R Floating Row Cop Header - 15,100 lbs
- With 2R Corn Header - 15,400 lbs
* Transport height - 124" Steering
GROUND DRIVE
4WD - Standard
* Wheel motors
* Two speed ranges, 12 MPH transport, 8 MPH work speed Tandem hydraulic pump with electronic control Tires 14.9-24 (ag lug) for minimal ground compaction
* 12.5-15 (ag lug) for minimal ground compaction
THRESHING & SEPARATION SYSTEM
Rotor
* Diameter - 15.5"
* Length - 99"
* Driven by hydraulic pump & motor with electronic control/adjustment
* High torque 2 speed drive
* 200-800 RPM low range
* 800-1200 RPM high range
* Reversible from cab
* Tight clearance feed sump for effective cleanout Concaves
* Five removable/interchangeable sections
* Available bar spacing: Blank, 5/16", 3/8", 1/2", 5/8" (specify factory configuration)
* Adjustable concave clearance from cab
* 1/8" to 1-1/4" opening
CLEANING SYSTEM
Sieve
* Quick-release single sieve design - 72" long x 20.75"
- Sieve must be specified on sales order
- Multiple fixed Graepel-style and adjustable sieves available Shaker/air lock/conveyor drive.
* Hydraulic driven mechanical drives Cleaning slope fan
* Speed adjustment from cab
* 450-1700 RPM
Sieve fan
* Speed adjustment from cab
* 450-1800 RPM
SEED DELIVERY
Air lock
* Removable metering wheel for cleanout/inspection Seed delivery blower
* Selectable speed settings for minimized grain damage in a variety of harvest conditions Tubing/elbows
* 6" diameter for large capacity
* Transport grain to weigh system without the use of augers Cyclone
* Electrically operated for easy transition from road to harvest
GRAIN TANK
40 Bushel grain tank 10' 6" Unload auger discharge height High speed unloading system designed for easy cleanout
CAB
Exterior features
* Curved windshield
* Windshield wiper with washer fluid
* Fiberglass roof cap
* Integrated LED lighting package
* Side mirrors
* Cab access ladder - Electrically actuated ladder Folding Interior Features
* Operator's seat with suspension
* Steering column - adjustable
* Radio with AM/FM/CD/USB/Bluetooth/Aux IN
* Automatic climate control Subsampling
* Full bagging access from cab
* Subsampling access from cab
CONTROLS & WIRING
Operator interface
* Color display for machine feedback *Operator console
* Joystick Control system
* Full electronic control with CAN bus communication
SAFETY / MAINTENANCE
Safety compliant guarding Hazard warning lamps Operator presence system Two fire extinguishers LOTO system 54461 Rev 000 U/M SET
CENTERS,WHEEL,60"/66",STD,
54593 SIEVE,ADJ,DUAL-ZONE,SHORT,33MM,R1
54795 UPGRADE,STUCCHI,RX
54795 UPGRADE,STUCCHI,RX
54584 PM,SERVICE,FIELD,R1
54439 KIT,PARTS,SPARE,COMBINE,R1
54748 CONCAVES,CORN/SOYBEAN,R1(SET)
54749 CONCAVES,WHEAT/CANOLA/SORGHUM,R1(SE
54715 SYSTEM,H2 CLASSIC
| • | H2 CLASSIC GRAINGAGE 2379 | |
| • | ON-SITE TRAINING AND SETUP VISIT | |
| • | MIRUS SOFTWARE PACKAGE | |
| • | H2 SYSTEM CNTRLR & CLASSIC INSTALL KIT | |
| • | PANASONIC TOUGHPAD FZ-G1 W/ACCESSORIES | |
| • | H2 LIND CHARGE CABLE | |
| • | H2 LOW YIELD INSERT KIT | |
| • | DSP I/O ACTUATOR CABLE | |
| • | H2 CLASSIC RUBBER ISOLATION KIT |
includes 15450 Pneumatic Conditioning Center (SMC) includes HM FREIGHT Harvest Master freight charge 54695 Install HCGG, R1 This is for installing a H2 graingage along with the computer system in an R1 combine. Does not include the H2 graingage. INCLUDES ENCLOSURE FOR H2
54555 CHOPPER,STRAW,R1/RX
54559 Seat Buddy R1/RX - Adding a buddy seat to the R1/RX cab for a 2 person operation/setup.
54768 MIRROR,FOLDING,ELC,RT SIDE,CAB,R1 - Adds the electric actuator to the mirror assembly so it can be folded remotely from inside the cab.
54556 TIRE/RIM,FRNT,14.9-24,R1/RX
54554 LIGHTS,LED,INTERNAL,RX,R1
54774 CAMERA,ONBOARD,QUAD,W/MONITOR,R1/RX
Four camera system with multi-view screen standard.
Up to 4 additional cameras may be added for user convenience. Cameras are placed at the following locations: - Backup, Grain tank, Cyclone, Seed tube.
54711 ACTUATOR,ELEC,DOOR,SAMPLE,R1
54552 TANK,BAG,DUMP,HYD,R1/RX Hyd dumping bag tank on left side of machine. 11 - Bushel capacity 72" Discharge height 54705 SIEVE,12MM,R1 One complete 12mm Sieve assembly for a R1 Combine. This includes the .312" tail rake, PN: 12910022
54680 SIEVE,ADJ,DUAL-ZONE,LONG,33MM,R1
8486.08 2 row 30" Row Crop Header with Sunflowers modifications: See below for details:
| - | Design and install higher side tins to keep heads in header on both sides of RC header |
| - | Design and install taller back side panels and back mess panel to keep heads in header and not wrap on RC header |
| - | Design and modify tin work above row crop belts with a more aggressive taper. This will allow heads to be pushed by the row crop belts and not hand up between the narrow opening above the gathering belts |
| - | Design and or modify snouts on RC so they are flatter and of a poly material, to increase the flow of sunflowers and help with feeding the head on to the RC conveyor belt. (In Feed Style header design) |
8459.09- Base R1 modifications for harvesting Sunflowers. See listing below for details backing up.
| - | Design and install rear deflector on discharge chute to increase flow into straw chopper. This may require a Slip-plate material or paint to make sunflower debris flow properly and not sit on tray before chopper. |
| - | Design and address seed bridging issue in hose section under weigh hopper to auger sump and valve. This may need to be larger for flow and eliminate bridging issue. Additional transfer auger length and sump may be also required. |
| - | Design and install spirals in cyclone, to direct seed to outlet to help prevent bridging at outlet for wetter material. This will require some valve sequencing changes also from the Electronics Department. |
| - | Install 3M protective coating to help prevent scratching from heads during harvest - 3M Clear protectant layer over paint will be installed on left and right side of combine and header at least 8 ft high. |
| - | The Sub sample option worked well in testing and will be used by this client. Will require ALMACO to design and install two adapters for the existing outlet of the sub sampler, so it will dump into a specialty bag and envelope * Customer will provide samples for design. Customer will require a 1 pint and 1-1/2 pint sub sample with adapters to feed into bag provided by client. |
NOTE 20 foot plots with 5 ft alleys on both oils and confection seed
| - | Install current HM Scrip file to run sub sample door automatically - Should be already a stock feature in the H2 software script file for ALMACO R series sub sampling |
| - | Review and eliminate potential places for seed bridging, especially in cyclone and transfer sumps. Run seed flow tests during Quality Control to check for flow issues or seed bridging. |
Especially evaluate these areas on the combine:
Cyclone, Bottom of enclosure, Transition tube from enclosure to discard auger.
IFO USA-
Additional Noted.
Please ensure that the shipment charges are included in the base year price. There is not a separate CLIN for Freight. FOB Destination applies.
Delivery Address:
USDA-ARS
Northern Crop Science Laboratory 1307 18th St. N.
FARGO ND 58102.
File details come from the government source that posted it. Updated .