Sol_140G0325Q0052.pdf

140G0325Q0052

1. REQUEST NO.

5a. ISSUED BY

NAME

a. NAME

c. STREET ADDRESS

d. CITY

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5a ON

OR BEFORE CLOSE OF BUSINESS (Date)

2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG.1

RATING

6. DELIVERY BY (Date)

7. DELIVERY

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

PAGE OF PAGES

5b. FOR INFORMATION CALL: (No collect calls)

TELEPHONE NUMBER

AREA CODE NUMBER

8. TO:

b. COMPANY

e. STATE f. ZIP CODE

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

THIS RFQ

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

IS IS NOT A SMALL BUSINESS SET ASIDEX

03/12/2025 0044005300

1 28

MODOC HALL, CSUS

3020 STATE UNIVERSITY DRIVE EAST

SACRAMENTO CA 95819-6027

USGS OAG SACRAMENTO ACQUISITION BR.

Multiple

Moffett PSC

350 N Akron Road Building 19

Moffett Field

CA 94035

916 278-9442Victor Nuno

03/24/2025 1200 ED

FOB DESTINATION

OTHER

(See Schedule)X

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice.

This action is set-aside for 100% small business.

participation.

334519:

OTHER MEASURING AND CONTROLLING DEVICE

MANUFACTURING

This procurement follows the procedures outlined in FAR Parts 12 and 13.

Potential Offerors must be registered in SAM.gov Continued ...

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations

13. NAME AND ADDRESS OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

a. NAME OF QUOTER

AREA CODE

NUMBER

15. DATE OF QUOTATION

b. TELEPHONE are are not attached

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA - FAR (48 CFR) 53.215-1(a)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 28

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0325Q0052 at time of quote/proposal submission.

Potential offers are required to complete and return with their quotes/offers FAR provisions

52.204-24 and 52.204-26.

Any award resulting from this RFQ will be based on Tradeoffs- Firm, Fixed Price and prior experience. Each offeror must submit sufficient documentation for the USGS to evaluate in order to determine technical acceptability of their offer. Failure to provide the requested information may result in removal from further consideration.

Submission of Quotation: Quotations shall only be accepted through electronic mail addressed to vnuno@usgs.gov. All quotation documents required by this solicitation must be uploaded and received in their entirety no later than

March 22, 2025, at 1200 Eastern Time. Please submit questions

Via email ONLY to vnuno@usgs.gov by March 18, 2025.

Period of Performance: 04/01/2025 to 05/31/2025

00010 Build SONDE in accordance with the Statement of

Work herein.

Product/Service Code: 6655

Product/Service Description: GEOPHYSICAL

INSTRUMENTS

Delivery: 05/31/2025

00020 Field installation support in accordance with the

Statement of Work herein.

Product/Service Code: N066

Product/Service Description: INSTALLATION OF

EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 28

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0325Q0052

Direct questions pertaining to this

RFQ to: Victor Nuno, Contracting Officer vnuno@usgs.gov

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

U.S. Geological Survey, OAG Sacramento 140G0325Q0052

TABLE OF CONTENTS

PROVISIONS:

TITLE PAGE#

Statement of Work 5

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) 8

52.204-7 SYSTEM FOR AWARD MANAGEMENT (NOV 2024) 8

52.212-1 INSTRUCTIONS TO OFFERORS, COMMERCIAL PRODUCTS & COMMERCIAL

SERVICES (SEP 2023)

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES-

REPRESENTATION (OCT 2020)

52.204-29 FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS—

REPRESENTATION AND DISCLOSURES (DEC 2023)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS -- COMMERCIAL ITEMS.

(MAY 2024)

CLAUSES:

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) 23

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018) 23

52.212-4 CONTRACT TERMS AND CONDITIONS – COMMERCIAL ITEMS (NOV 2023) 23

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS – COMMERCIAL ITEMS (JAN 2025)

GS0231 TECHNICAL LIAISON – TECHNICAL DIRECTIONS (DEC 2024) 27

GS1131 UNILATERAL DEOBLIGATION OF UNEXPENDED FUNDS ( MAY 2013) 28

GS-0199 PREVENTION OF MALICIOUS CODE 28

INVOICING INSTRUCTIONS 28

STATEMENT OF WORK FOR SEISMIC SONDE TO BE INSTALLED IN SAFOD

Background:

The San Andreas Fault Observatory at Depth (SAFOD) is a deep scientific research drill hole into the San Andreas Fault in central California that was completed in 2007 as part of the National Science Foundation’s EarthScope project. The accessible drill hole is cased to a measured depth of 11,000 feet (vertical depth 8900 feet). Since December 2008 the U. S. Geological Survey (USGS) has been operating a 3-component seismometer in the well.

The current instrument manufactured by Advanced Seismic Instrumentation and Research (ASIR) has been in operation since May 2022. The electrical wireline has failed, and the instrument must now be modified to accommodate a new cable with three optical fiber tubes and 4 electrical conductors (specifications in Figure 1).

Seismic Sonde-Minimum salient characteristics:

Based on experience gained with 2 years of operation of the ASIR instrument and of the 5-years of operation of the previous seismometer in SAFOD manufactured by the Earth Science & Engineering of the University of Auckland, New Zealand, the USGS desires to replace the current instrument with one that incorporates several new features designed to improve the quality of the seismic data and to accommodate optical fibers for use with Distributed Acoustic Sensing (DAS). For reasons of data continuity, the same geophones as used previously, or equivalent, have been selected.

At the intended depth of deployment, hydrostatic pressures and temperatures are expected to be up to 4500 psi (31.0 MPa) and 234 deg F (112 deg C), respectively. Due to the high dissolved gas content (mostly methane-series gases) in the SAFOD borehole fluid, the sonde housing cannot have any elastomers (O-rings or other rubber components) directly exposed to the borehole fluid. This will require a specialized cable head termination at the top of the sonde containing dense Krytox Oil (manufactured by Dow Corning) to maintain a low gas solubility, gravitationally stable oil reservoir to prevent degradation of the internal rubber boot and fluid intrusion into the sonde. Solid seals such as epoxy in the cable head housing have been found to degrade and leak over time during prior SAFOD installations and are not acceptable.

The technical specifications of the seismometer package are as follows:

Sensor:

1. Geospace Omni-2400 Geophone or equivalent

2. Natural frequency 15 Hz

3. Sensitivity 1.32 V/in/sec

4. Open circuit damping 0.57

5. DC Resistance 2400 Ohms

6. Moving Mass 7.8 g

7. Operational temperature limit 180 deg C.

Pressure Vessel:

1. 2-Component orthogonal geophone mount (1 axial, 1 transverse to tool axis)

2. Four geophones in series per component (to maximize signal-to-noise ratio)

3. Three 1.65 mm (0.065 in.) stainless steel tubes each containing six single-mode optical fibers (see Figure 1)

4. Terminators for optical fibers in one tube as described below.

5. Terminators to seal two optical fiber tubes in case of leakage into the pressure vessel

6. High-pressure (20,000 psi) leak-proof stainless steel housing

7. Outside diameter of 2.5 inches or less

8. Capable of continuous operation at temperatures of 130 deg C

9. All metal-to-metal seals in contact with borehole fluids (i.e., no O-rings or other elastomers)

Cable Head

1. Stainless steel housing,

2. Same OD as pressure vessel with tapered top (taper angle of 30 relative to tool body, terminating in OD of

1.25 inches at top of cable head),b

3. 7 pin bulkhead rated to 20,000 psi with Viton boot to accommodate 4 electrical conductors and 3 stainless steel tubes containing optical fibers (see Figure 1)

4. TIG welding of seam between cable head and pressure housing to retain Krytox oil

5. Must hold Krytox oil to 3” above top of boot without leaking at 65 degrees from vertical

6. Filler port on bottom of cable head for Krytox oil placed just above welded seamI

7. Cable clamp connection to galvanized 0.481-in-diameter plow-steel logging cable, providing a pull-out weight between 2000 and 2500 lbs.

Sinker Bar:

1. Outside diameter must be the same as pressure vessel,

2. Screw-in attachment to bottom of pressure vessel,

3. Screw-in tapered bottom of sinker bar (taper angle of 30 relative to tool body, terminating in OD of 0.5 inches at bottom of sinker bar),

4. Designed to bring total tool weight up to 100 lbs.

RESPONDENTS MUST PROVIDE TECHNICAL DRAWINGS OF THE TOOL DESIGN THAT ARE

ADEQUATE TO ASSESS THAT ALL SPECIFICATIONS ARE BEING MET.

Installation requirement:

A field engineer associated with the Contractor will need to bring the unassembled seismic sonde out to the SAFOD site and perform the following tasks on site:

1. Install the sensor on the end of the USGS’s fiber-optic/electromechanical cable, which is permanently installed at the SAFOD site. This includes passing all three stainless steel tubes through the pressure-tight bulkhead and sealing them in place, soldering the four electrical conductors to insulated metal feed throughs, installing the Viton boot, setting the load-bearing cable clamp, TIG welding the cable head to seal the pressure vessel, and backfilling the cable head with Krytox oil (Krytox oil to be provided by USGS).

2. The 6 optical fibers in one of the stainless-steel tubes will be terminated as follows by the USGS contractor for the DAS system. Four of the fibers will be spiced together pairwise to form two loops. Each loop must have a minimum radius of curvature of 2 cm. The other two fibers are to be terminated in the pressure vessel by the awardee to prevent return of reflected laser light to the surface.

3. The other two stainless steel tubes will be terminated inside the pressure vessel to ensure that they will be leak tight if the pressure vessel seals fail and they are exposed to ambient fluids at in-situ pressure. It will be the responsibility of the awardee to assemble the pressure vessel with all fibers functioning properly.

4. Test geophones at surface to verify high-quality (high signal/noise, correct polarities on each channel, minimum crosstalk between channels) signal transmission through this cable and recording on a RefTek seismic data acquisition system, which the USGS will provide.

5. Test optical fibers at the surface to verify that the two loops and two independent fibers perform according to industry standards (e.g., TIA/EIA 568) for total link loss

6. Assist with lowering the tool to the bottom of the SAFOD borehole on the USGS cable and associated hoist unit and verify adequate cable tension to minimize post-installation stick-slip behavior.

7. Verify satisfactory sonde performance once the sonde is installed at target depth and recording the geophone output on the RefTek system. Also verify the continuity and acceptable signal quality received from the two fiber loops and independent fibers. This includes verifying that high-quality data is being received, as described under steps 3 and 4 for the surface test.

8. If satisfactory performance is not achieved, then the Contractor’s field engineer will conduct diagnostic tests and attempt to remedy the situation. This may include removal of the sonde from the borehole and repeating of steps 1-6.

Period of performance- 04/01/2025 – 05/31/2025

Figure 1: Manufacturer specifications of new armored cable at SAFOD, which includes both electrical conductors and optical fiber in its core – Elements A and B, respectively.

PROPRIETARY; UsePursuant toCompanyInstructions

Rochester Stock Type 7-H-482D (with optical elements)

Date Page Revision Part No.

11/02/2012 1 08546

Rochester Wire&Cable

751OldBrandyRoad Tele:540825-2111 Culpeper,Virginia22701 Fax:540825-2238

Description mm Inch

ELEMENT A; Single (4) Cdr: #16 AWG, 19/0.0113" (0.29 mm) 1.37 0.054 HD Bare Copper

Ins: 0.017" (0.43 mm) wall ETFE 2.24 0.088

ELEMENT B; Optic Tube (3) Fiber: 8.8/125/155 µm SM (6) 0.15 0.006 Tube: Type 304 SS (Furnished) 1.65 0.065 Belt: 0.0115" (0.29 mm) Wall ETFE 2.24 0.088

CORE

3A's and 3B’s around 1A with fillers as necessary. Voids filled with free-stripping semiconductive material. Semiconductive tape over core. 6.93 0.273

ARMOR: Special GIPS Wire Inner: 18/0.052" (1.32 mm) 9.58 0.377 Outer: 24/0.052" (1.32 mm) 12.22 0.481

CABLE CHARACTERISTICS

(Nominal Values @ 20°C)

Metric English

PHYSICAL

Overall Dimensions 12.22 mm 0.481 in Weight in Air 593 kg/km 398 lb/kft Weight in Freshwater 494 kg/km 332 lb/kft Temperature Rating 204°C 400°F

MECHANICAL

Breaking Strength 98 kN 22,000 lbf Bend Diameter 53 cm 21 in Elongation (approximate) 0.16 m/km/kN 0.7 ft/kft/klbf

ELECTRICAL – Element A Voltage Rating 1,000 Vdc 1,000 Vdc Insulation Resistance @ 500 Vdc 15,000 M•km 50,000 M•ft dc Resistance cdr 16.2 /km 5.0 /kft armor 3.8 /km 1.2 /kft

Velocity of Propagation @ 1 MHz 62% 62%

OPTICAL – Element C Attenuation Rate

@ 1310 nm 0.80 dB/km -- @ 1550 nm 0.70 dB/km --

PROVISIONS

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/

52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a purchase order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Tradeoffs- Firm, Fixed Price and prior experience.

52.204-7 – SYSTEM FOR AWARD MANAGEMENT (NOV 2024)

52.212-1 – INSTRUCTIONS TO OFFERORS COMMERCIAL ITEMS & COMMERCIAL SERVICES

(SEP 2023)

52.204-24 -REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision— Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub.

L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

http://www.acquisition.gov/far/ https://www.acquisition.gov/far/part-52#FAR_52_204_26 https://www.acquisition.gov/far/part-52#FAR_52_212_3 https://www.acquisition.gov/far/part-52#FAR_52_204_26 https://www.acquisition.gov/far/part-52#FAR_52_212_3 https://www.acquisition.gov/far/part-52#FAR_52_204_25

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(d) Representation. The Offeror represents that—

(1) It □ will, □ will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that— It □ does, □ does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services— https://www.sam.gov/

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES-REPRESENTATION

(OCT 2020)

(a) Definitions. As used in this provision, "covered telecommunications equipment or services" and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(c)

(1) Representation. The Offeror represents that it □ does, □ does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it □ does, □ does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

52.204-29 FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS—

REPRESENTATION AND DISCLOSURES (DEC 2023)

(a) Definitions. As used in this provision, Covered article, FASCSA order, Intelligence community, National security system, Reasonable inquiry, Sensitive compartmented information, Sensitive compartmented information system, and Source have the meaning provided in the clause 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.

(b) Prohibition. Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the prohibition is set out in an applicable Federal Acquisition Supply Chain Security Act (FASCSA) order, as described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.

(c) Procedures.

(1) The Offeror shall search for the phrase “FASCSA order” in the System for Award Management

(SAM)( https://www.sam.gov) for any covered article, or any products or services produced or provided by a source, if there is an applicable FASCSA order described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.

(2) The Offeror shall review the solicitation for any FASCSA orders that are not in SAM, but are effective and do apply to the solicitation and resultant contract (see FAR 4.2303(c)(2)).

(3) FASCSA orders issued after the date of solicitation do not apply unless added by an amendment to the solicitation.

(d) Representation. By submission of this offer, the offeror represents that it has conducted a reasonable inquiry, and that the offeror does not propose to provide or use in response to this solicitation any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order in effect on the date the solicitation was issued, except as waived by the solicitation, or as disclosed in paragraph (e).

(e) Disclosures. The purpose for this disclosure is so the Government may decide whether to issue a waiver. For any covered article, or any products or services produced or provided by a source, if the covered article or the source is subject to an applicable FASCSA order, and the Offeror is unable to represent compliance, then the Offeror shall provide the following information as part of the offer:

(1) Name of the product or service provided to the Government;

https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.sam.gov/ https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.acquisition.gov/far/4.2303#FAR_4_2303

(2) Name of the covered article or source subject to a FASCSA order;

(3) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Offeror;

(4) Brand;

(5) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(6) Item description;

(7) Reason why the applicable covered article or the product or service is being provided or used;

(f) Executive agency review of disclosures. The contracting officer will review disclosures provided in paragraph (e) to determine if any waiver may be sought. A contracting officer may choose not to pursue a waiver for covered articles or sources otherwise subject to a FASCSA order and may instead make an award to an offeror that does not require a waiver.

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS -- COMMERCIAL ITEMS (MAY

2024)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision— Covered telecommunications equipment or services has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is https://www.sam.gov/ https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.ecfr.gov/current/title-13/part-127 https://www.ecfr.gov/current/title-13/section-127.300 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title6-section395&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title6-section395&num=0&edition=prelim disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended."Sensitive technology"— Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business (SDVOSB) concern means a small business concern— (1)

(i) Not less than 51 percent of which is owned and controlled by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; or

(2) A small business concern eligible under the SDVOSB Program in accordance with 13 CFR part 128 (see subpart 19.14).

(3) Service-disabled veteran, as used in this definition, means a veteran as defined in 38 U.S.C. 101(2), with a disability that is service connected, as defined in 38 U.S.C. 101(16), and who is registered in the Beneficiary Identification and Records Locator Subsystem, or successor system that is maintained by the Department of Veterans Affairs’ Veterans Benefits Administration, as a service-disabled veteran.

Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program means an SDVOSB concern that—

(1) Effective January 1, 2024, is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300; or

(2) Has represented that it is an SDVOSB concern in SAM and submitted a complete application for certification to SBA on or before December 31, 2023.

Service-disabled veteran-owned small business (SDVOSB) Program means a program that authorizes contracting officers to limit competition, including award on a sole-source basis, to SDVOSB concerns eligible under the SDVOSB Program.

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.acquisition.gov/far/subpart-19.14#FAR_Subpart_19_14 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section101&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section101&num=0&edition=prelim https://www.ecfr.gov/current/title-13/part-121 common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13

CFR 121.103.

Small disadvantaged business concern, consistent with 13 CFR 124.1001, means a small business concern under the size standard applicable to the acquisition, that—

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by—

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR 124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern—

(1) Not less than 51 percent of which is owned and controlled by one or more veterans (as defined at 38 U.S.C.

101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women Women-owned small business concern means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13

CFR 127.300.

(b)

(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs __.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that—

(i) It □ is, □ is not a small business concern; or https://www.ecfr.gov/current/title-13/part-127 https://www.ecfr.gov/current/title-13/part-127 https://www.ecfr.gov/current/title-13/section-127.300 https://www.ecfr.gov/current/title-13/section-127.300 http://www.sam.gov/ https://www.acquisition.gov/far/52.212-3#FAR_52_212_3 https://www.acquisition.gov/far/4.1201#FAR_4_1201 https://www.acquisition.gov/far/part-19#FAR_Part_19 https://www.acquisition.gov/far/19.000#FAR_19_000

(ii) It □ is, □ is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.]

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it □ is, □ is not a veteran-owned small business concern.

(3) SDVOSB concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents that it □ is, □ is not an SDVOSB concern.

(4) SDVOSB concern joint venture eligible under the SDVOSB Program. The offeror represents that it □ is, □ is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR

128.402. [Complete only if the offeror represented itself as an SDVOSB concern in paragraph (c)(3) of this provision.] [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.]

(5) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is, □ is not a small disadvantaged business concern as defined in 13 CFR 124.1001.

(6) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is, □ is not a women-owned small business concern.

(7) WOSB joint venture eligible under the WOSB Program. The offeror represents that it □ is, □ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.]

(8) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents that it □ is, □ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c).

[The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.] Note to paragraphs (c)(9) and (10): Complete paragraphs (c)(9) and (10) only if this solicitation is expected to exceed the simplified acquisition threshold.

(9) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is a women-owned business concern.

(10) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________

(11) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that–

(i) It □ is, □ is not a HUBZone small business concern listed, on the date of this representation, as having been certified by SBA as a HUBZone small business concern in the Dynamic Small Business Search and SAM, and will attempt to maintain an employment rate of HUBZone residents of 35 percent of its employees during performance of a HUBZone contract (see 13 CFR 126.200(e)(1)); and

(ii) It □ is, □ is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c).

[The offeror shall enter the name and unique entity identifier of each party to the joint venture: ______.] Each HUBZone small business concern participating in the HUBZone joint venture shall provide representation of its HUBZone status.

(d) Representations required to implement provisions of Executive Order11246-

(1) Previous contracts and compliance. The offeror represents that-

(i) It □ has, □ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It □ has, □ has not filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that-

(i) It □ has developed and has on file, □ has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60- 2), or

(ii) It □ has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

https://www.ecfr.gov/current/title-13/section-121.103#p-121.103(h) https://www.ecfr.gov/current/title-13/section-125.8#p-125.8(a) https://www.ecfr.gov/current/title-13/section-125.8#p-125.8(a) https://www.ecfr.gov/current/title-13/section-125.8#p-125.8(b) https://www.ecfr.gov/current/title-13/section-124.1001 https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(a) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(c) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(a) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(c) https://www.ecfr.gov/current/title-13/section-126.200 https://www.ecfr.gov/current/title-13/section-126.616#p-126.616(a) https://www.ecfr.gov/current/title-13/section-126.616#p-126.616(c)

(e) Certification Regarding Payments to Influence Federal Transactions (31 http://uscode.house.gov/ U.S.C. 1352).

(Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.)

(1)

(i) The Offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that each domestic end product listed in paragraph (f)(3) of this provision contains a critical component.

(ii) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items.