SLEP MHE Final Inspection Form - Attachment (4)__01May2020.pdf
PDF 3 MB Posted
- Attached to
- MSC MHE Service Federal contract opportunity
- Solicitation number
- N3220520Q3022
About this file
This document contains a combined synopsis and solicitation notice for material handling equipment inspections, maintenance, repair, testing, painting, stenciling and certification services. The Military Sealift Command seeks these services for equipment at the contractor's facility from award through September 25, 2020. As a combined synopsis and solicitation for commercial items prepared under FAR 12.6, this notice serves as the sole solicitation and quotes are being requested without issuing a separate written solicitation. The Department of the Navy Military Sealift Command is the contracting agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SLEP MHE Inspection Maintenance Requirements 4K-Electric Lift Truck - Attachme.docx | DOCX document | |
| SLEP MHE Induction form - Attachment (3)__01May2020.pdf | ||
| Limited SOURCE MSC NORFOLK (SLEP)Redacted.pdf | ||
| SLEP MHE Inspection Maintenance Requirements 6K-Diesel Lift Truck - Attachment.docx | DOCX document | |
| SOW MSC NORFOLK MHE SLEP Service Rev1 01May2020.docx | DOCX document | |
| COMBINED SYNOPSIS SOLICITATION.20Q3022.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL MEMORANDUM No. PHST-35-00-B
SHIPBOARD UNIT: SHOREBASED UNIT: iT ECH. MANUAL NO.: INSPECTION
SHIP/ACTIVITY NAME: EQUIPMENT COST CODE: DATE:
USN REGISTRATION NO.: HOURMET ER READING:
�EAR: MAKE: MODEL: TYPE: MFG SERIAL NO.: CAPACITY:
MOTOR TYPE: TIRE TYPE: FUEL TYPE: BLADE LENGT H:
ITEM
INSPECTION POINT N/A REJECT
(ON SPOT)
ACCEPT
NO. REPAIR
Manufacturer's data/identification plate
(Serial number matches frame serial number)
Operational weight test in accordance with NAVSUP PUB 538
(non-ammunition ashore)
Weight test certification (ammunition or shipboard handling) in accordance with NAVSEA SW023-AH-WHM-010
4 Accredited laboratory certification plate (e.g., UL, FM)
5 Alphabetical designation (EE, DS, etc.) (3-inch block letters)
6 Operational controls correctly labeled/marked
7 Battery identification plate or marking
8 Fuel type marking (e.g., DIESEL FUEL ONLY)
9 Warning decals and labels
Safe working load marking (sides and mast) (minimum 2-inch characters) (e.g., SWL 6000 LBS)
Vehicle weight marking (sides and mast) (minimum 2-inch characters) (e.g., VW 10,000 LBS)
Registration number (e.g., 13-20000) (3-inch sides and mast to fit)
13 SLEP data plate (minimum 2-1/2 x 4-1/2 inches)
"LEAD AND CHROMATE FREE PAINT" marking (minimum
1/4 inches)
15 "LIFT HERE" marking (minimum 3/4-inch letters)
16 "TIEDOWN" marking (minimum 3/4-inch letters)
Tire pressure marking (pneumatic only) (minimum 3/4-inch characters)
18 Fuel cap ( color coded: Diesel = Green/Gas = Red)
"SHIPBOARD USE APPROVED" marking (minimum 3/4-inch letters)
20 Blue diagonal striping (type EX only) (6-inch wide)
FIGURE 1-2. SLEP MHE Final Inspection Form
1-11
File details come from the government source that posted it. Updated .