Solicitation_SIS400-17-Q-0127-AlarmSystem.pdf

Solicitation DOCUMENT

Installation and maintenance of residential alarm systems

Solicitation No. SIS400-17-Q-0127

American Consulate General

General Services Office – Procurement 4 HaGalgal Street

Talpiot, Jerusalem

GSO Procurement

Jerusalem Solicitation # SIS400-17-Q-0127

TABLE OF CONTENTS

Section 1 - The Schedule

SF 18 cover sheet

Continuation To SF-18, RFQ Number SIS400-17-Q-0127, Prices

Continuation To SF-18, RFQ Number SIS400-17-Q-0127, Schedule Of

Supplies/Services, Description/Specifications/Work Statement

Exhibit A – Contractor Furnished Material

Exhibit B – Government Furnished Property

Exhibit C – Locations

Exhibit D – Pricing Table

Exhibit E – Instructions on how to finalize SAM registration

Section 2 - Contract Clauses

Contract Clauses

Addendum to Contract Clauses - FAR and DOSAR Clauses not Prescribed in Part 12

Section 3 - Solicitation Provisions

Solicitation Provisions

Addendum to Solicitation Provisions - FAR and DOSAR Provisions not Prescribed in

Part 12

Section 4 - Evaluation Factors

Evaluation Factors

Addendum to Evaluation Factors - FAR and DOSAR Provisions not Prescribed in Part

Section 5 - Representations and Certifications

Representations and Certifications

Addendum to Offeror Representations and Certifications - FAR and DOSAR Provisions not Prescribed in Part 12

SF-18

SF-18.pdf

SECTION 1 - THE SCHEDULE

CONTINUATION TO SF-18

RFQ NUMBER SIS400-17-Q-0127

PRICES

1. SCOPE OF CONTRACT

The Contractor shall provide, install, and maintain residential alarm systems for the U.S. Consulate

General – Jerusalem.

The performance period of this contract is from the start date in the Notice to Proceed and continuing for 12 months. The initial period of performance includes any transition period authorized under the contract.

2. PRICING

This is a fixed-price indefinite quantity/indefinite delivery contract.

(a) The Contractor shall provide the services at the rates shown below for the whole duration of the contract.

(b) The quantities of supplies and services specified in the table are estimates only and are not guaranteed by this contract.

(c) The Contractor shall furnish to the Government, when and if ordered, the supplies or services as specified in this contract. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations. Except as specified in the Delivery-

Order Limitations clause or in the paragraph below, there is no limit on the number of orders that may be issued / ordered.

(d) The prices listed below shall be in New Israeli Shekels (NIS) and shall include all labor, materials, overhead, and profit.

(e) VALUE ADDED TAX

VALUE ADDED TAX. Value Added Tax (VAT) is included in the CLIN rates or as a separate

Line Item in the contract and on Invoices. Local law dictates the portion of the contract price that is subject to VAT.

2.1.a. Pricing table:

*The total/location is calculated by multiplying the unit price X No. of units/location.

**The total is calculated by multiplying the total/location X Estimated No. of locations

2.1.b. Minimum/Maximum

The U.S. Government guarantees the following minimum and maximum orders under this contract:

Furnishing, installation, maintenance and testing of new alarm systems: minimum of 85 and maximum of 115 locations.

Removal of existing: minimum of 85 and maximum 115.

Clins Description Unit Price (NIS) No. of units/location

Total/location

(NIS)*

Estimated

No. of locations

TOTAL (NIS) **

A

1 Main control panel 1 - 100 -

2 Secondary panel 1 - 100 -

3 Wireless Door/Window contact 10 - 100 -

4 Wireless Motion Sensor 3 - 100 -

5 GSM modem (unlocked SIM) 1 - 100 -

6 Panic button 1 - 100 -

7 Wireless Repeater 1 - 100 -

8 Lithium batteries for the sensors 10 - 100 -

9 Wireless indoor siren 1 - 100 -

B 1 100 -

C 1 100 -

- - GRAND TOTAL

Installation, testing of new system and maintenance service

Removal of exisiting system including main panel, wiring and sensors, etc. at location

GRAND TOTAL NOT INCLUDING VAT

VAT 17% (included in estimates)

Alarm Equipment

CONTINUATION TO SF-18,

RFQ NUMBER SIS400-17-Q-0127

SCHEDULE OF SUPPLIES/SERVICES.

1. PERFORMANCE WORK STATEMENT (PWS)

The Contractor shall activate and/or provide and install an alarm system for each residence and office location covered under this contract. The alarm systems provided shall interface with a

Central Alarm Monitoring System (CAMS) via telephone lines using GSM back up. The alarm system, when activated, shall sound an alarm at the resident and contact the CAMS at the consulate on the monitoring station, Arnona Alarm Center.

The alarm systems shall have available/use of common hardwire/wireless alarm sensors/transmitters, including, but not limited to, the following:

Window/door contact sensors or motion detectors

Hand-held panic buttons

Secondary touch pad panel.

GSM module with SIM card for the alarm system to communicate with the CAM system

Land line telephone communication module to communicate with the CAM.

Wireless indoor siren

Wireless Repeater

See Exhibit A for detailed specifications of required system.

In the case of wireless sensors/transmitters, long-life lithium batteries shall be provided with the equipment. The alarm systems and all components shall meet or exceed commonly accepted U.S.

industry standards for design, reliability and performance for the detection of unauthorized intrusions while minimizing the number of “false” alarms.

The Government shall notify the Contractor as soon as it has notice or becomes aware of any damage or destruction to the detection equipment from any cause, including damage or destruction by electric storm.

1.2. FURNISHING AND INSTALLATION OF NEW ALARM SYSTEMS

1.2.1. DESCRIPTION

The Contractor shall provide, install, and activate new electronic alarm systems, consisting of the following components, in designated one-floor residences on the main access floor only (in multi-floored houses, including those with basements, the Contractor shall alarm all accessible windows and doors will be alarmed):

Central alarm panel with minimum of 10 zones

Two (2) LED key pads

Electrical connection

Lithium batteries: Infra-red detectors/radar motion detectors, magnetic contact sensors

Hand-held panic alarm buttons, One (1) interior siren

Door and window contacts

High-performance, Wireless, Mirror Dual Technology Detector with Anti-masking

Repeater

Motion detectors

Cellular communication

Task orders will be issued for each installation required.

The Contractor shall install sensors under the direction of the COR as to number and placement.

The Contractor shall rely on its professional judgment in determining the number and the placement of the above detection components but will assure intrusion detection at any location. However, if during the performance acceptance inspection by the COR it is found that, due to a misjudgment by the Contractor, the installation shows weak spots where the intended security of a location is compromised, the COR shall have the right to request the Contractor to add and move the placement of any alarm system component installed by the Contractor until satisfactory security coverage is reached, without extra cost to the Government.

Each installation will be followed by a complete testing of the system, including a test of each system component, by the Contractor. The Contractor shall be responsible for the maintenance of each installed system thereafter. The Contractor shall replace inoperable alarms within twelve (12) hours from when the test is completed. If the Contractor needs to deviate from the twelve (12) hour requirement, the request for deviation shall be in writing to the COR for approval and shall be of no cost to the USG.

1.2.2. ACCESS

The Contractor shall ask the COR in writing for permission to access properties covered under this contract, for the purpose of routine maintenance at least one (1) week in advance. The Contractor may make oral emergency requests followed up by a written request on the next business day. The

Contractor shall not make requests for access for routine maintenance directly to the resident.

1.2.3. TYPE OF EQUIPMENT

The Contractor shall propose and furnish only equipment that is adequate to complete performance under this contract.

1.2.4. INSTALLATION WARRANTY

The Contractor shall warrant all the systems furnished and installed by the Contractor against troubleshooting as a result of faulty or inappropriate installation. The Contractor shall correct any such faults without charge to the Government during the term of this contract.

1.2.5. OPERATION INSTRUCTIONS BOOKLET

Upon each installation the Contractor shall provide to the resident an operation instructions booklet in the English language with instructions on how to activate/deactivate and reset the alarm system, and how to input the secret keypad code.

1.2.6. SCHEMATICS/DIAGRAMS

The Contractor shall provide to the COR an alarm schematic/diagram for each residence, detailing where, and what type of sensors have been installed, and the all codes that is programed, within ten

(10) days of installation.

1.3. REMOVAL OF EXISTING ALARM SYSTEMS

When directed by the Contracting Officer, the Contractor shall remove alarm systems in designated apartments and residences. The Contractor shall use maximum care as to cause minimal damage to the building while removing the alarms.

2. DELIVERY SCHEDULE

2.1. Installation of New Alarm Systems: Each installed alarm system must be activated, made operational and tested within maximum one (1) working day (07:00-15:30). The minimum total of

100 residences under this contract must be completed within 12 months from date of the notice to proceed.

2.2. Individual appointments with residents for the removal of existing alarms and for the installation of new alarm systems will be made by the COR. The COR will give the

Contractor a task order with at least five (5) working days’ notice before each individual installation/activation appointment.

2.3 DELIVERY SCHEDULE.

The following items shall be delivered under this contract:

Description & PWS Section Qty Delivery Date Deliver To

Personnel Biographies, 10. 1 5 days after award of contract

CO

Insurance, 13. 1 5 days after award of contract

Operations Manual in English, 1.2.5 1 Upon Installation COR

Schematics/Diagrams, 1.2.6 1 10 days after installation COR

Monthly Reports of installs, de-installs and equipment used, 6

1 Monthly COR

Old alarm systems removed and new systems installed, 1.2 & 1.3

25 Within the 1 st quarter from the date of the Notice to

Proceed

COR

Old alarm systems removed and new systems installed, 1.2 & 1.3

25 Within the 2 nd quarter COR

Old alarm systems removed and new systems installed, 1.2 & 1.3

25 Within the 3 rd quarter COR

Old alarm systems removed and new systems installed, 1.2 & 1.3

25 Within the 4 th quarter COR

2.4 PERIOD OF PERFORMANCE

The contract shall be effective as from the date of Notice to Proceed and shall remain in effect for 12 months.

The Contracting Officer may also extend this contract for an additional six (6) months, if required by the Government, in accordance with the FAR clause 52.217-8 OPTION TO

EXTEND SERVICES, in SECTION 2 of this contract.

3. TASK ORDERS

The Contracting Officer will issue task orders to the Contractor to perform any work under this contract. If a task is given orally, it will be followed up by a written task order within two (2) days of the oral order. All task orders will be in written form, state the manner of the work to be performed, and have an issue date and a date by which the work is to be completed.

4. PROJECT MANAGEMENT AND SUPERVISION

In view of the importance of this project, the Contractor shall assign a specific project manager who will be the direct liaison with the COR concerning all work related to this contract. It will be the project manager’s task to direct, schedule, supervise, inspect and test the work under this contract, and to receive instructions from the COR. The Contractor’s project manager shall be able to speak and understand the English language at Level 2. Level 2 is defined as being able to verbally satisfy routine demands and limited work requirements, and being able to comprehend simple written material on subjects within a familiar context.

Quality control shall be the responsibility of the Contractor. The Contractor shall perform inspection visits to the work site on a regular basis. These visits shall be coordinated with the COR, but shall be surprise inspections to those working on the contract.

5. COVERAGE DURING EXTENDED POWER OUTAGES

If power outages last longer than the alarm system’s reserve battery power, the Contractor shall coordinate with the COR to provide additional reserve battery power until power is restored.

6. REPORTING

The Contractor shall provide a monthly written report to the COR documenting all equipment used, number and location of units installed, number and location of alarm systems de-installed, and any problems detected.

7. SUBCONTRACTING

The Contractor shall not subcontract any work to be performed without the express consent of the

Contracting Officer.

8. DEFINITIONS

“Central Processor/Control Box” is a unit that receives and analyzes input from the sensors installed in various zones being protected and communicates via the radio transmitter to the Central Alarm

Monitoring System (CAMS) located at a base operations center.

“Keypad” is a component used to activate, deactivate, and program the alarm system. Commands are entered by pressing various buttons on the unit.

“Transmitter” is the primary transmitter that establishes a radio signal link for communication between the control box and the CAMS at the base operations center.

“GSM” module communication with Sim card that establishes a call link for communication between the control box and the CAMS at the base operations center.

“Receiver” is the component which receives signals from the wireless alarm sensors/transmitters and relays data to the control box for processing.

“Door/Window Contact Sensors” are magnetic-type sensors that are mounted on windows and doors to signal when they have been opened.

“Motion Sensors” are sensors which utilize one or a combination of several different technologies to detect the motion of an intruder and signal his/her presence in a protected zone. Common technologies used include employment of passive infrared (PIR) and/or microwave signals.

“Hand-Held Panic Alert Buttons” are small, remote-control-type units that can be carried on one’s person in or near the protected property. In case of an emergency, the button can be pressed to signal for assistance from a React Team.

“Interior Siren” is an audible alarm positioned inside the protected property to alert the occupants to an alarm condition. “

“U.S. Consulate” and “Consulate” mean the diplomatic or consular mission of the United States of

America for which services are provided under this contract.

“Department” means the Department of State, including all of its activities wherever located.

“Government” means the Government of the United States of America unless specifically stated otherwise.

9. INSPECTION BY GOVERNMENT:

The services and the supplies furnished will be inspected from time to time by the COR, or his/her authorized representatives, to determine that all work is being performed in a satisfactory manner, and that all supplies are of acceptable quality and standards.

The Contractor shall be responsible for any countermeasures or corrective action, within the scope of this contract, which may be required by the Contracting Officer as a result of such inspection.

9.1 QUALITY ASSURANCE AND SURVEILLANCE PLAN (QASP)

This plan provides an effective method to promote satisfactory contractor performance. The QASP provides a method for the Contracting Officer's Representative (COR) to monitor Contractor performance, advise the Contractor of unsatisfactory performance, and notify the Contracting

Officer of continued unsatisfactory performance. The Contractor, not the Government, is responsible for management and quality control to meet the terms of the contract. The role of the

Government is to monitor quality to ensure that contract standards are achieved.

Performance Objective Scope of Work Para Performance Threshold

Services.

Performs all services set forth in the scope of work.

1. thru 15.

All required services are performed and no more than one

(1) customer complaint is received per month.

9.1.2 SURVEILLANCE

The COR will receive and document all complaints from Government personnel regarding the services provided. If appropriate, the COR will send the complaints to the Contractor for corrective action.

9.1.3 STANDARD

The performance standard is that the Government receives no more than one (1) customer complaint per month. The COR shall notify the Contracting Officer of the complaints so that the

Contracting Officer may take appropriate action to enforce the inspection clause (FAR 52.246-4, Inspection of Services – Fixed Price (AUG 1996)), if any of the services exceed the standard.

9.1.4 PROCEDURES

(a) If any Government personnel observe unacceptable services, either incomplete work or required services not being performed they should immediately contact the COR.

(b) The COR will complete appropriate documentation to record the complaint.

(c) If the COR determines the complaint is invalid, the COR will advise the complainant. The COR will retain the annotated copy of the written complaint for his/her files.

(d) If the COR determines the complaint is valid, the COR will inform the Contractor and give the Contractor additional time to correct the defect, if additional time is available. The

COR shall determine how much time is reasonable.

(e) The COR shall, as a minimum, orally notify the Contractor of any valid complaints.

(f) If the Contractor disagrees with the complaint after investigation of the site and challenges the validity of the complaint, the Contractor will notify the COR. The COR will review the matter to determine the validity of the complaint.

(g) The COR will consider complaints as resolved unless notified otherwise by the complainant.

(h) Repeat customer complaints are not permitted for any services. If a repeat customer complaint is received for the same deficiency during the service period, the COR will contact the Contracting Officer for appropriate action under the Inspection clause.

10. SECURITY

General - The Government reserves the right to deny access to U.S.-owned and U.S.-operated facilities to any individual. The Government will run background checks on all proposed

Contractor employees. The Contractor shall provide the names, biographic data and have the employees submit to the RSO vetting process on all Contractor personnel who shall work on this contract.

Identity Cards - The Consulate shall issue identity cards to Contractor personnel, after they are approved. Contractor personnel shall display identify card(s) on the uniform at all times while providing services under this contract. These identity cards are the property of the Government.

The Contractor is responsible for their return at the end of the contract, when an employee leaves

Contractor service, or at the request of the Government.

11. STANDARDS OF CONDUCT

(a) General. The Contractor shall maintain satisfactory standards of employee competency, conduct, cleanliness, appearance and integrity and shall be responsible for taking such disciplinary action with respect to employees as required. Each Contractor employee is expected to adhere to standards of conduct that reflect credit on themselves, their employer, and the United

States Government. The Government reserves the right to direct the Contractor to remove an employee from the worksite for failure to comply with the standards of conduct. The Contractor shall immediately replace such an employee to maintain continuity of services at no additional cost to the Government.

(b) Uniforms. The Contractor's employees shall wear clean, neat and identifiable uniforms, although not necessarily identical uniforms. All employees shall wear accreditation at all times.

(c) Disorderly conduct, use of abusive or offensive language, quarreling, intimidation by words, actions, or fighting shall not be condoned. Also included is participation in disruptive activities that interfere with normal and efficient Government operations.

(d) Intoxicants and Narcotics. The Contractor shall not allow its employees while on duty to possess, sell, consume, or be under the influence of intoxicants, drugs or substances that produce similar effects.

(e) Criminal Actions. Contractor employees may be subject to criminal actions as allowed by law in certain circumstances. These include but are not limited to the following actions:

Falsification or unlawful concealment, removal, mutilation, or destruction of any official documents or records or concealment of material facts by willful omission from official documents or records;

Unauthorized use of Government property, theft, vandalism, or immoral conduct;

Unethical or improper use of official authority or credentials;

Security violations; or, Organizing or participating in gambling in any form.

(f) Key Control. The Contractor employees shall be escorted by a Consular Residential

Security Technician at all times. No keys shall be issued to the Contractor for access to any residences, gates, or buildings.

(g) Neglect of duties shall not be condoned. This includes sleeping while on duty, unreasonable delays or failures to carry out assigned tasks, conducting personnel affairs during duty hours and refusing to render assistance or cooperate in upholding the integrity of the work site security.

12. PERSONNEL HEALTH REQUIREMENTS

All employees shall be in good general health without physical disabilities that would interfere with acceptable performance of their duties. All employees shall be free from communicable diseases.

13. LAWFUL OPERATION, PERMITS, AND INDEMNIFICATION

(a) Bonds. The Government imposes no bonding requirement on this contract. The

Contractor shall provide any official bonds required, pay any fees or costs involved or related to the authorization for the equipping of any employees engaged in providing services specified under this contract if such bonds or payments are legally required by the local government or local practice.

(b) Employee Salary Benefits. The Contractor shall be responsible for payment of all employee wages and benefits required by host country law or agreements with its employees. The

Government, its agencies, agents, and employees shall not be part of any legal action or obligation regarding these benefits which may subsequently arise. Where local law requires bonuses, specific minimum wage levels, and premium pay for holidays, payments for social security, pensions, sick or health benefits, severance payments, child care or any other benefit, the Contractor is responsible for payments of these costs and must include them in the fixed prices in this contract.

(c) Personal Injury, Property Loss or Damage (Liability). The Contractor assumes absolute responsibility and liability for any and all personal injuries or death and property damage or losses suffered due to negligence of the Contractor's personnel in the performance of this contract. The Contractor's assumption of absolute liability is independent of any insurance policies.

(d) Amount of Insurance. The Contractor is required to provide whatever insurance is legally necessary. The Contractor shall, at its own expense, provide and maintain during the entire performance period the following insurance amounts:

General Liability

(1) Bodily Injury, On or Off the Site, in US Dollars

Per Occurrence 50,000.00

Cumulative 100,000.00

(2) Property Damage, On or Off the Site, in US Dollars

Per Occurrence 50,000.00

Cumulative 100,000.00

The types and amounts of insurance are the minimums required. The Contractor shall obtain any other types of insurance required by local law or that are ordinarily or customarily obtained in the location of the work. The limit of such insurance shall be as provided by law or sufficient to meet normal and customary claims.

For those Contractor employees assigned to this contract who are either United States citizens or hired in the United States or its possessions, the Contractor shall provide workers' compensation insurance in accordance with FAR 52.228-3.

The Contractor agrees that the Government shall not be responsible for personal injuries or for damages to:

(a) Any property of the Contractor,

(b) Its officers,

(c) Agents,

(d) Servants,

(e) Employees, or

(f) Any other person, arising from, and incidental to, the Contractor's performance of this contract.

The Contractor shall hold harmless and indemnify the Government from any and all claims arising, except in the instance of gross negligence on the part of the Government.

The Contractor shall obtain adequate insurance for damage to, or theft of, materials and equipment in insurance coverage for loose transit to the site or in storage on or off the site.

(e) Permits. Without additional cost to the Government, the Contractor shall obtain all permits, licenses, and appointments required for the prosecution of work under this contract. The

Contractor shall obtain these permits, licenses, and appointments in compliance with applicable host country laws. The Contractor shall provide evidence of possession or status of application for such permits, licenses, and appointments to the Contracting Officer with its proposal. Application, justification, fees, and certifications for any licenses required by the host government are entirely the responsibility of the Contractor.

(f) Workers' Compensation and Employer's Liability

Workers' Compensation and Occupational Disease As required by host country law

Employer's Liability As required by host country law

14. ORDERING OFFICIAL

The designated ordering individual under FAR 52.216-18 is the Contracting Officer.

15. CERTIFICATE OF INSURANCE

The Contractor shall furnish to the Contracting Officer a current certificate of insurance as evidence of the insurance required. In addition, the Contractor shall furnish evidence of a commitment by the insurance carrier to notify the Contracting Officer in writing of any material change, expiration or cancellation of any of the insurance policies required not less than thirty (30) days before it is effective. When coverage is provided by self-insurer, the

Contractor shall not change or decrease the coverage without the Contracting Officer's approval.

16. LIST OF EXHIBITS

EXHIBIT A - CONTRACTOR FURNISHED MATERIALS

EXHIBIT B - GOVERNMENT FURNISHED PROPERTY

EXHIBIT C - LOCATIONS

EXHIBIT D - PRICING TABLE

EXHIBIT E – INSTRUCTIONS ON HOW TO FINALIZE SAM

REGISTRATION.

EXHIBIT A - CONTRACTOR FURNISHED MATERIALS

ALARM SYSTEM

Main panel

Accommodates over 120 wireless devices:

o Up to 40zones o Up to 5 keypads o Up to 3 sirens o Up to 4 repeaters

48 user codes

Supports partitions

Up to 2 wired zones, 1 wired siren and 1 programmable output

Built-in PSTN dialer

Most contain GSM/GPRS and ADSL internal modules

Stores 1000 log entries

Optional proximity reader

Remote voice box

Extensive range of peripherals for every application

Secondary panel

Designed for arming, disarming, emergency signaling, home automation and remote control applications

Typical indoor range: 50-100m

Indicates entry and exit periods even when not touched by a user

Back light illumination

Visual indications for system status, troubles and memory

Wall-mount bracket

Continuously measures communication quality and automatically sets transmission power to the minimum required for reliable communication

Tamper detection

Long battery life (up to 2 years with typical use)

Proximity reader) - can be used even with panels that do not have a built-in proximity reader

Panic remote

Suitable for carrying, wearing or wall mounting

Extended arm and disarm functionality for controlling the Alarm

Two models: miniature one-button model for alarm message , miniature two-button model for alarm messages and system arming/disarming

Safety mechanism for preventing false panic calls

Extended battery life (5 years with typical use)

Supplied with a belt clip, keychain, and lanyard necklace

Door/Window Contact

Designed primarily for protecting doors and windows

Transmission range is far greater than the industry standard - enabling repeater-free installations even in large premises

Longer battery life for up to 8 years (in typical use)

Visible signal quality indication shown on the device

TDMA technology – provides robustness and reliability closer than ever to wired systems

Employs the proven AES-128 (128 bit key) advanced encryption algorithm for correct message identification and protects the alarm system from code grabbing and other attacks

Continuously measures communication quality and automatically sets transmission power to the minimum required for reliable communication

Configured from the panel – no hardware switches and no need to re-open the detector once closed

Low-battery signaling http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/innovation-technologies/technology-leadership http://www.visonic.com/glossary/glossary#FrequencyHoppingSpreadSpectrum(FHSS) http://www.visonic.com/glossary/glossary#FrequencyHoppingSpreadSpectrum(FHSS) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard)

High-performance, Wireless, Mirror Dual Technology Detector with Anti-masking

Features and Benefits:

Dual PIR and K-band microwave technologies dramatically reduce false alarms and decrease associated operational costs

Ideal for commercial and harsh residential installations

Unprecedented, active anti-masking (AM) protection technology for both the PIR and microwave sensors

Anti-disguise mode detects intruders even in extreme temperature conditions

Uses revolutionary technology to deliver outstanding reliability, robustness and efficiency

Indoor Siren

Ideal for use in a wide range , 110dB Piezo siren and high-power strobe light

Distinguishes between fire and burglar alarms, emitting a different sound for each

Configured from the panel – no hardware switches and no need to re-open the device once closed

Large transmission range enabling repeater-free installations

Longer battery life for up to 8 years (in typical use)

Visible signal quality indication shown on the device

Double tamper protection – cover and wall tampers

Compatible with residential alarm systems and Alarm receivers

Repeater

Extends the communication range between the intruder alarm systems and other Alarm transmitters Far Transmission range

Visible signal quality indication shown on the device

Employs the proven AES-128 (128 bit key) advanced encryption algorithm for correct message identification and protects the alarm system from code grabbing and other attacks

Continuously measures communication quality and automatically sets transmission power to the minimum required for reliable communication

Configured from the panel – http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#FrequencyHoppingSpreadSpectrum(FHSS) http://www.visonic.com/glossary/glossary#FrequencyHoppingSpreadSpectrum(FHSS) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard)

Compact and easy to install

Front and back tamper protected

LED indications for power failure, activity and installation performance diagnostics

Anti-masking Motion Detector

15m (50ft) 90 o multiple-curtain coverage with "wall" zone

Far Transmission range

Long battery life (5 years in typical use)

Visible signal quality indication shown on the device

Visible and transmitted low battery indication

Fast and easy adjustment

Dual PIR and K-band microwave technologies dramatically reduce false alarms

Active anti-masking (AM) protection technology for both the PIR and microwave sensors

Anti-disguise mode detects intruders even in extreme temperature conditions

Deliver outstanding reliability, robustness and efficiency

Cellular Communication

Compatible with all alarm panels

Can be configured as primary or backup reporting method

Full event reporting

Supports SIA/IP, SIA and Contact ID monitoring protocols

Two-way voice communication

Optional external antenna is available to enhance the GSM signal reception http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/glossary/glossary#AES(AdvancedEncryptionStandard) http://www.visonic.com/Products/PowerG-Wireless-Property-Protection/pg-control-panels http://www.visonic.com/Products/PowerG-Wireless-Property-Protection/pg-control-panels http://www.visonic.com/Products/PowerG-Wireless-Property-Protection/pg-control-panels http://www.visonic.com/Products/PowerG-Wireless-Property-Protection/pg-control-panels http://www.visonic.com/Products/PowerG-Wireless-Property-Protection/pg-control-panels http://www.visonic.com/Products/PowerG-Wireless-Property-Protection/pg-control-panels http://www.visonic.com/Products/PowerG-Wireless-Property-Protection/pg-control-panels

EXHIBIT B - GOVERNMENT FURNISHED PROPERTY

CAMS COMPUTER SYSTEM

Computer capable of running CAMS software

Monitors

Cables

UPS

Printer

Modem

Software using Contact ID

EXHIBIT C – LOCATIONS

We currently have about 100 alarmed residences with numbers divided into locations which fluctuate depending on need but are all within the metropolitan area. A few of them have an extra alarm system to control the building’s roof access. The Consulate maintains approximately 100 residences at all times.

This is the current break down:

3 in French Hill

47 in West Jerusalem Center

41 in the Arnona/ Abu Tor areas

6 in the Malha/ Ramat Sheret area

3 in Beit Safafa

EXHIBIT D – PRICING TABLE

ExhibitD-PricingTable .xlsx

EXHIBIT E – Instructions on how to finalize SAM registration.

Exhibit E - Instructions for SAM Registration.pdf

SECTION 2 - CONTRACT CLAUSES

FAR 52.212-4 CONTRACT TERMS AND CONDITIONS – COMMERCIAL ITEMS

(MAY 2015) is incorporated by reference (see SF-1449, Block 27A)

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive

Orders—Commercial Items (Sept 2016)

CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS—

COMMERCIAL ITEMS (SEPT 2016)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or

Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004)(Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting

Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

_X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with

Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C.

3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment

Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the

American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards

(Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note).

__ (5) [Reserved].

X (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

X (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts

(Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

_X_ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with

Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters

(Jul 2013) (41 U.S.C. 2313).

__ (10) [Reserved].

__ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15

U.S.C. 657a).

https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html#wp1146366 https://www.acquisition.gov/sites/default/files/current/far/html/52_233_240.html#wp1113329 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t29t32+1665+30++%2831%29%20%20AND%20%28%2831%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_233_240.html#wp1113344 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1137622 http://uscode.house.gov/ http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1141983 http://uscode.house.gov/ http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1144881 https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1141649 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1151163 https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1151299 https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html#wp1140926 https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html#wp1145644 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1135955 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20

__ (ii) Alternate I (Nov 2011) of 52.219-3.

__ (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business

Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)

(15 U.S.C. 657a).

__ (ii) Alternate I (JAN 2011) of 52.219-4.

__ (13) [Reserved]

__ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644).

__ (ii) Alternate I (Nov 2011).

__ (iii) Alternate II (Nov 2011).

__ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

__ (ii) Alternate I (Oct 1995) of 52.219-7.

__ (iii) Alternate II (Mar 2004) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and

(3)).

__ (17)(i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Oct 2001) of 52.219-9.

__ (iii) Alternate II (Oct 2001) of 52.219-9.

__ (iv) Alternate III (Oct 2015) of 52.219-9.

__ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

__ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).

__ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C.

637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside

(Nov 2011) (15 U.S.C. 657 f).

__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15

U.S.C. 632(a)(2)).

__ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically

Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small

Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15

U.S.C. 637(m)).

_X (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

_X_ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Feb 2016)

(E.O. 13126).

_X_ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

__ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212).

__ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C.

793).

__ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

__ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act

(Dec 2010) (E.O. 13496).

https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1135955 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1135970 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1135970 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136004 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136017 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136017 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136017 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136032 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136058 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136058 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136058 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136058 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136174 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136175 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136186 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136387 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1139913 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1144950 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1144420 http://uscode.house.gov/ http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1147479 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1147630 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1147656 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1147711 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1158632 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t37t40+200+2++%2838%29%20%20AND%20%28%2838%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1162802 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t29t32+2+78++%2829%29%20%20AND%20%28%2829%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t29t32+2+78++%2829%29%20%20AND%20%28%2829%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1148123 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1160019

_X_ (33)(i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

_X_ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (34) 52.222-54, Employment Eligibility Verification (OCT 2015). (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

__ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–

Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential

Hydrofluorocarbons (JUN 2016) (E.O. 13693).

__ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and

Air Conditioners (JUN 2016) (E.O. 13693).

__ (38)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014)

(E.O.s 13423 and 13514).

__ (ii) Alternate I (Oct 2015) of 52.223-13.

__ (39)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s

13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-14.

__ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C.

8259b).

__ (41)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT

2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

_X_ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving

(AUG 2011) (E.O. 13513).

__ (43) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

__ (44) 52.223-21, Foams (JUN 2016) (E.O. 13693).

__ (45) 52.