Serv C20-052 Stratasys 3D Printer APPENDIX C Master.docx
DOCX document 29 KB Posted
- Attached to
- Stratasys 3D Printer Federal contract opportunity
- Solicitation number
- FA812520Q0061
About this file
This document contains safety specifications for a federal contract opportunity to provide annual maintenance for a Stratasys 3D printer at Tinker Air Force Base. The specifications outline general safety program requirements for mishap notification, a safety program addressing topics such as housekeeping, material handling equipment, hazardous energy control, and fire protection. The contractor's safety program must comply with OSHA standards and Air Force manuals on relevant safety topics. The related federal contract opportunity is a sole source solicitation for Stratasys, Inc. to provide 3D printer preventative maintenance, with responses due by the specified date. Offerors should include warranty and brand information in their responses. The Air Force Sustainment Center at Tinker Air Force Base is the contracting agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combined Synopsis-Solicitation.pdf | ||
| Serv C20-052 Stratasys 3D Printers Justification and Approval CO Signed.pdf | ||
| Serv C20-052 Stratasys 3D Printers Stratasys Maintenance PWS.docx | DOCX document | |
| Serv C20-052 Stratasys 3D Printer Equipment List.xls | XLS spreadsheet |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
13 February 2020
APPENDIX "C"
SAFETY SPECIFICATIONS
FOR
SERV 20-052 REACT FORTUS 3D PRINTER ANNUAL MAINTENANCE
PRE FILE NO: OC-ALC/SE 20-34
PREPARED BY: OC-ALC/SE
SECTION I - GENERAL REQUIREMENTS
A. Safety Program Requirements. The contractor will implement a safety program that ensures protection of Government personnel and property. The program will consist of, as a minimum:
1. Mishap notification/reporting as defined in paragraph B. below.
2. A Safety Program that addresses, as a minimum, the subjects listed in Safety Program Elements, Section II and to be used during performance of the work described in the contract.
B. Mishap Notification.
1. The contractor shall notify the procuring Safety Office or a designated Government Representative (GR) within one (1) hour of all mishaps or incidents. A written report of the mishap/incident shall be sent within three calendar days to the GR, who will forward it to the Procuring Safety Office. For information not available at the time of initial written report, the contractor shall provide the remaining information no later than 20 calendar days after the mishap, unless extended by the Safety Office.
2. Mishap notifications shall contain, as a minimum, the following information:
| a. | Contract, Contract Number, Name and Title of Person(s) Reporting |
| b. | Date, Time and exact location of accident/incident |
| c. | Brief Narrative of accident/incident (Events leading to accident/incident) |
| d. | Cause of accident/incident, if known |
| e. | Estimated cost of accident/incident (material and labor to repair/replace) |
| f. | Nomenclature of equipment and personnel involved in accident/incident |
| g. | Corrective actions (taken or proposed) |
| h. | Other pertinent information |
3. If requested by the designated government representative, the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records, until released by the Procuring Safety Office.
C. The safety provisions of this contract, shall apply to any subcontracts/subcontractors.
1. Safety requirements listed herein that do not concern contractor’s operations or services shall be considered self-deleting as mutually agreed by the contractor and the procuring office.
SECTION II - SAFETY PROGRAM ELEMENTS
The contractor’s Safety Program shall clearly define procedures, personnel qualifications, facilities and required equipment necessary to fulfill the following elements:
Element/Requirement Referenced Benchmark
OSHA Standards for General Industry 29 CFR 1910
Housekeeping AFMAN 91-203
Material Handling Equipment (MHE) AFMAN 91-203
Handling, Storage and use of AFMAN 91-203 Flammable/Combustible Liquid
Vehicle Operations AFI 91-207
Hazardous Energy Control AFMAN 91-203
Fire Protection Tinker Instruction 32-2001
SECTION III - BIBLIOGRAPHY OF PUBLICATIONS/DIRECTIVES
These publications/directives and all supplements/changes thereto apply to the extent required by the provisions of Sections I, and II.
AFI 91-204 Apr 15 Safety Investigations and Reports
AFI 91-207 May 15 USAF Traffic Safety Program
| AFMAN 91-203 | Jun 12 | Air Force Consolidated Occupational Safety |
| Standard |
AFMAN 91-203 Jun 12 Confined Space (Chapter 23)
AFMAN 91-203 Jun 12 Welding, Cutting, and Blazing (Chapter 27)
AFMAN 91-203 Jun 12 Flightline and Ground Operations (Chapter 24)
AFMAN 91-203 Jun 12 Housekeeping (Chapter 5)
Tinker Instruction 32-2001 Oct 09 Fire Protection Program
29 CFR 1910 OSHA Standards for General Industry
File details come from the government source that posted it. Updated .