Scope of Work_HVAC.docx

Provide a new 18,000 BTU cassette evaporator that will mount in same location as existing in ceiling. Note: If New Cassette is physically smaller than existing one Station has spare ceiling tiles on hand.

• Provide a new 18,000 BTU Heat Pump that will mount on existing concrete pad (40”L x 49”W) with low ambient.

• Indoor unit will have a hard wired wall mount controller in same location as existing.

• If existing line set is incorrect size it will need to be replaced but prefer keeping existing line. Flush line if reusing and recharge with R-410a.

• Verify the existing condensate line is clear and reconnect line to the new air handler.

• Reuse the existing electrical disconnect and “whip” and reconnect to new Heat Pump.

• Perform a check, test and startup of new system to verify proper operation.

• Demonstrate the operation of the remote controller for the customer.

• Provide close out documents including O&M manuals to the customer.

Current HVAC system is;

Carrier 38HDF/QRF Model# 40KMQ01824-301 Serial# 4007I19353