SATPC0040404 Tab 04 4 SOW..pdf

This Statement of Work outlines NASA Glenn Research Center's requirement for Precision Filters Signal Conditioning Chassis hardware to be delivered within 60-90 days from order. The procurement consists of four primary components: one 28016F-M3 16-slot chassis with four 50-pin D output connectors, one 28016C-ACPS-1 power supply rated for 115 VAC, one 28000A-BIF2-FT backplane interface module featuring Ethernet remote interface with Windows-based graphical user interface software and FAT/GNG test support, and sixteen 28144-LP4FP-HC14-L quad bridge/dynamic strain conditioner modules. The strain conditioner modules include 4-pole low-pass filters with programmable bridge configurations supporting 1, 2, or 4-arm setups or 2-wire/4-wire constant current modes, selectable completion values of 120, 350, and 1kOhm, precision 255-step resistive shunt calibration capability, and IEPE input mode with 8mA constant current source.

Performance of this work is to be conducted at NASA Glenn Research Center, 21000 Brookpark Road, Cleveland, Ohio 44135. The statement specifies exact part numbers for all required components, enabling the contractor to procure or fabricate the complete signal conditioning system as configured for the government's test and measurement applications.