SATPC0035478 Tab 04 4 SOW.pdf
PDF 156 KB Posted
- Attached to
- EDM Drill Federal contract opportunity
- Solicitation number
- 80NSCC24874312Q
About this file
This document is a Statement of Work (SOW) for the procurement of an EDM Drill E300 system and supporting equipment to expand the capability of a laboratory to drill radioactive and hard ceramic materials.
The SOW specifies the required characteristics and capabilities of the EDM Drill system, including an autotransformer, isolation transformer, electrode guide sets, external dielectric filtering unit, multiple point EDM hole drilling functionality, control system, USB connectivity, automatic edge/center/corner functions, high pressure water pump, and stainless steel table and work pan. The system must accommodate a variety of materials including steel, carbide, aluminum, copper, and brass. The vendor shall deliver the EDM Drill system within 10 weeks of the order. The place of performance is the MSFC central receiving location. This procurement is associated with a sole source federal contract opportunity, Solicitation Number 80NSCC24874312Q, issued by the National Aeronautics and Space Administration Shared Services Center.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0035478 Tab 07 Capability Statement SAM.gov.pdf | ||
| SATPC0035478 Tab 06 RDSS..pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements The objective is to expand the capability of the laboratory to allow for drilling of radioactive and hard ceramic materials. The objective is to be met through the Procurement of the EDM Drill E300 system and supporting equipment.
2. Characteristics, Scope, and Specs
The vendor shall provide the following:
• EDM Drill o Characteristics Autotransformer 3 phase 60 Hz skva 400V 12 Kva - 3 phase - 400V secondary Isolation Transformer.
Electrode guide set for diameters 0.3/0.4/0.5/0.7/0.8 mm. Includes seal glands diameter 0.5/1.0 mm.
Electrode guide set for diameters: 1.0/1.1/1.2/1.3/1.4/1.5 mm.
Includes seal glands diameter 1.0/2.0 mm.
Electrode guide set for diameters: 1.6/1.8/1.9/2.0/2.5/3.0 mm.
Includes seal glands diameter 2.0/3.0 mm.
External dielectric filtering unit.
Multiple point EDM hole drilling with integrated rotating spindle Control system with machine setup, job creation, process optimizer and diagnostics.
USB ports for job transfer. File import from TXT, Job program from PC simulator or G-Code ISO Automatic edge find/center find/corner functions. Program check and job simulation with axis movement High pressure pump that uses ordinary water with no messy additives.
Minimum 40Gb hard disk capacity for expansive program storage.
Stainless steel table and work pan.
17x+ Electrode Guide Sets for 0.3 to 3.0 mm diameters. Seal glands for 0.5-1.0, 1.0-2.0, 2.0-3.0 mm diameters. Keyless chuck on spindle
Automatic electrode wear compensation.
On-board technology accommodates steel, carbide, aluminum, copper and brass Table size 15.7x11.8 in Workpiece dimensions 27.56 in x 17.72 in x 7.87 in Machine maximum external dimensions 52.8x35.5x76.4 in Table holds minimum 650 lbs Movement speed 4 Speeds, adjustable, maximum 33 in/min
3. Place of Performance / Delivery
Shall be shipped to MSFC central receiving
4. Period of Performance
Product to be delivered 10 weeks from order
File details come from the government source that posted it. Updated .