SATPC0034971 Tab 10 SOW_Redacted.pdf
PDF 295 KB Posted
- Attached to
- SEM Sputter Coater and Carbon Rod Federal contract opportunity
- Solicitation number
- 80NSSC24869533Q
About this file
This document is a Statement of Work (SOW) for a Carbon Sputter Coater with Carbon Rod to be procured by NASA. The key requirements include a DENTON DESK-V Sputter Coater and Carbon Rod Evap Accessory to enable imaging of materials that are known to charge and prevent examination under current equipment capabilities. The SOW specifies the technical characteristics, scope, and minimum required specifications for the equipment, including electrical requirements, installation, training, and warranty.
The related federal contract opportunity is Solicitation Number 80NSSC24869533Q for a SEM Sputter Coater and Carbon Rod, issued by the National Aeronautics and Space Administration Shared Services Center. The anticipated on-site need date is 9/1/2024, with 100% Net 30 days payment terms after delivery acceptable by check, wire or ACH.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0034971 Tab 10 SOW_Redacted.pdf | ||
| SATPC0034971 Tab 10 RFQ Open Market.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Carbon Sputter Coater with Carbon Rod
STATEMENT OF WORK
1. Objective/Description
Request for equipment to replace aging capabilities and expand those of the NASA Applied Chemistry Lab and NASA Investigative Chemistry Laboratory. Allows for imaging of materials that are known to charge and prevent examination under current equipment capabilities. This capability does not currently exist at KSC. Increases ability to identify and investigate a broader range of samples by mitigating charging issues. Increases capabilities for Commercia Crew Program support and NASA Investigative Chemistry Laboratory. Supports multiple programs across the agency and KSC: CCP, EGS, STMD, MCO. Procuring the DENTON DESK-V Sputter Coater (DTN-DSK00V-0023) and Carbon Rod Evap Accy 120V STD DESK V (CAR001-0071) allows for warranty of the instrument and future expansion to gold and platinum sputter coater by procuring smaller add on accessories. Current gold sputter coater is old and no spare parts left so this will be a good backup for rapid accessory/capability add on in the future.
2. Characteristics, Scope, and Specs/Requirements
A)DENTON DESK-V Sputter Coater (DTN-DSK00V-0023) and Carbon Rod Evap Accy B)120V STD DESK V (CAR001-0071) for Carbon sputter coating
Standard operations required:
-DC sputtering -Sputter etch samples -Etch table with shutter allows user to pre-clean samples prior to deposition -PLC full-color touch-screen capable of storing up to 10 user-defined recipes -Color touch-screen to monitor and change process in real time -Mechanical pump to reach 50 mtorr process pressure -6" diameter glass process chamber
Minimum required specifications:
Baseplate.
-Two-stage, direct-drive Mechanical Pump located outside of the system cabinet to evacuate the cylinder.
-An automatic Vent Valve is attached to the mechanical pump. It will automatically open when the -Mechanical Pump is turned OFF to vent the chamber to atmosphere. It will automatically close when the Mechanical pump is turned on.
-An insulated Specimen Table with provisions for height adjustment.
-A manual Gas Control is provided to control pressure in the cylinder.
-Six main operations for the system: Vacuum, Etch Enable (if equipped), Rotation (if equipped), Sputter Enable, Timed Etch (if equipped) and Timed Sputter.
-A Programmable Logic Controller (PLC) controls the system. A Touch Screen is used to interface with the PLC. Operator interface is through a graphics program that is running on the Touch Screen.
Electrical Requirements:
120VAC; 10 Amps
CARBON ROD ACCESSORY AND CARBON YARN ACCESSORY: 120 VAC; 10 Amps (standard)
-INSTALLATION AND TRAINING
facility.
A one-year warranty of all parts and labor for the FE SEM shall be standard. A two-day application training for 1 person at JEOL facility. Unlimited technical support from trained applications specialists shall be available for the life of the instrument.
3. Place of Performance This unit will be delivered to NASA Kennedy Space Center, Building M7-0355, Room
1274C. This room is a dedicated room for use with the FE-SEM with gas commodities needed to service this instrument. The technical use authority for the instrument is of the Exploration System and Development Office (UBE).
4. Period of Performance 9/1/2024 (anticipated on-site need date).
Estimated Delivery: Estimate Delivery TBD Payment Terms: 100% Net 30 days after Delivery Acceptable forms of Payment: Check, Wire or ACH
File details come from the government source that posted it. Updated .