SATPC0032500 Tab 04 4 SOW.pdf
PDF 143 KB Posted
- Attached to
- Turbopump System for Tribology Testing Federal contract opportunity
- Solicitation number
- 80NSSC23844514Q
About this file
This document specifies requirements for the procurement of electromagnetic interference backshells for use on electrical cable harnesses for a spaceflight project. The National Aeronautics and Space Administration Glenn Research Center is purchasing various circular and D-subminiature backshells from Isodyne to be delivered to Maxar in San Jose, California and NASA GRC in Cleveland, Ohio. The backshells are to provide EMI protection on harnesses for the Gateway Power and Propulsion Element project and must meet Grade 1/Level 1 specifications. The vendor will also provide certificates of conformance and lot/date code traceability documents. A total of 426 backshells of 12 part numbers are required for delivery by the specified dates and locations.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0032478 Tab 04 4 SOW.pdf | ||
| SATPC0032478 Tab 10 open market RFQ.pdf | ||
| SATPC0032478 Tab 10 open market RFQ.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
National Aeronautics and Space Administration Glenn Research Center (GRC)
Cleveland, OH 44135
Government Specification for EMI Backshell Procurement
The table below lists the backshells to be purchased for the Gateway Power and Propulsion Element
(PPE) project. These backshells will be attached to electrical connectors already acquired, to provide increased Electromagnetic Interference (EMI) protection on cable harnesses intended for spaceflight.
The backshells shall be Grade 1/Level 1, in accordance with NASA EEE‐INST‐002: Instructions for EEE
Parts Selection, Screening, Qualification, and Derating. The material finish for the backshells shall be electroless nickel. With the backshells, the vendor shall deliver the following:
‐ Vendor to provide Certificate of Conformance (C of C) to attest compliance to the applicable standards/specifications for the parts specified on this Purchase Order. The C of C shall include a statement that the parts passed all required tests.
‐ Vendor to provide Lot/Date Code data of specified part(s) on this Purchase Order, with traceability to
NASA's Purchase Order for each item requested.
Shipment of the backshells is to two different locations; the quantities to each location are listed in a separate table column for each location. Delivery addresses are listed below.
Item No. Description
Quantity for delivery to Maxar in San Jose, CA
(ZIP
95125)
Quantity for delivery to NASA GRC in Cleveland, OH (ZIP
44135)
Total Purchase Quantity
EMI Circular Backshell compatible with MIL‐C‐38999 Electrical Connector.
Straight, shell size 15. Electroless Nickel material finish. Cable entry designator 04 (1/2 inch). Length 1.25 inches.
Slotted. Non‐magnetic spring band.
Fluorosilicone O‐ring (LM100 to the M25988 spec).
Isodyne Part No.
ISOHS150M1504‐5S‐LM‐N 7 1 8
EMI Circular Backshell compatible with MIL‐C‐38999 Electrical Connector.
Straight, shell size 17. Electroless Nickel material finish. Cable entry designator 04 (1/2 inch). Length 1.25 inches. 13 1 14
Slotted. Non‐magnetic spring band.
Fluorosilicone O‐ring (LM100 to the M25988 spec).
Isodyne Part No.
ISOHS150M1704‐5S‐LM‐N
EMI Circular Backshell compatible with MIL‐C‐38999 Electrical Connector.
Straight, shell size 19. Electroless Nickel material finish. Cable entry designator 04 (1/2 inch). Length 1.25 inches.
Slotted. Non‐magnetic spring band.
Fluorosilicone O‐ring (LM100 to the M25988 spec).
Isodyne Part No.
ISOHS150M1904‐5S‐LM‐N 13 1 14
EMI Circular Backshell compatible with MIL‐C‐38999 Electrical Connector.
Straight, shell size 25. Electroless Nickel material finish. Cable entry designator 04 (1/2 inch). Length 1.25 inches.
Slotted. Non‐magnetic spring band.
Fluorosilicone O‐ring (LM100 to the M25988 spec).
Isodyne Part No.
ISOHS150M2504‐5S‐LM‐N 7 2 9
D‐Subminiature EMI Backshell compatible with M24308 connector. Top entry. Electroless Nickel. Shell size 1.
Cable entry designator 2 (0.250 inch).
Fillister head screw hardware. Quick Tie Leg, Slotted, No spring band.
Isodyne Part No. ISOT207M102BK‐SDS 28 3 31
D‐Subminiature EMI Backshell compatible with M24308 connector. Top entry. Electroless Nickel. Shell size 2.
Cable entry designator 2 (0.250 inch).
Fillister head screw hardware. Quick Tie Leg, Slotted, No spring band.
Isodyne Part No. ISOT207M202BK‐SDS 13 1 14
D‐Subminiature EMI Backshell compatible with M24308 connector. Top entry. Electroless Nickel. Shell size 3.
Cable entry designator 2 (0.250 inch).
Fillister head screw hardware. Quick Tie Leg, Slotted, No spring band.
Isodyne Part No. ISOT207M302BK‐SDS 7 1 8
D‐Subminiature EMI Backshell compatible with M24308 connector. Top entry. Electroless Nickel. Shell size 5.
Cable entry designator 2 (0.250 inch).
Fillister head screw hardware. Quick Tie Leg, Slotted, No spring band.
Isodyne Part No. ISOT207M502BK‐SDS 75 8 83
EMI Backshell compatible with Micro D‐ Subminiature MIL‐C‐83513 Electrical connector. Electroless Nickel material finish. Shell size 15. Top cable entry with size designator 08 (0.250 inch). Male Fillister head screw hardware. Shield termination slot. Non‐magnetic spring band.
Isodyne Part No. ISOT315M1508B‐S‐N 44 4 48
EMI Backshell compatible with Micro D‐ Subminiature MIL‐C‐83513 Electrical connector. Electroless Nickel material finish. Shell size 21. Top cable entry with size designator 08 (0.250 inch). Male Fillister head screw hardware. Shield termination slot. Non‐magnetic spring band.
Isodyne Part No. ISOT315M2108B‐S‐N 38 4 42
EMI Backshell compatible with Micro D‐ Subminiature MIL‐C‐83513 Electrical connector. Electroless Nickel material finish. Shell size 37. Top cable entry with size designator 08 (0.250 inch). Male Fillister head screw hardware. Shield termination slot. Non‐magnetic spring band.
Isodyne Part No. ISOT315M3708B‐S‐N 75 8 83
EMI Backshell compatible with Micro D‐ Subminiature MIL‐C‐83513 Electrical connector. Electroless Nickel material finish. Shell size 51. Top cable entry with size designator 10 (0.312 inch). Male Fillister head screw hardware. Shield termination slot. Non‐magnetic spring band.
Isodyne Part No. ISOT315M5110B‐S‐N 10 1 11
EMI Backshell compatible with Micro D‐ Subminiature MIL‐C‐83513 Electrical connector. Electroless Nickel material finish. Shell size 9. Top cable entry with size designator 08 (0.250 inch). Male 56 6 62
Fillister head screw hardware. Shield termination slot. Non‐magnetic spring band.
Isodyne Part No. ISOT315M908B‐S‐N
TOTAL 386 40 426
Address for Maxar delivery:
Attn: Karen Murdock
Maxar
PPE Project
1989 Little Orchard Street
San Jose, CA 95125
Address for NASA GRC delivery:
NASA Glenn Research Center
21000 Brookpark Road
Attn: Sherice Sampson / PPE Bonded Storage
Bldg. 333, Room 100W
Cleveland, OH 44135
File details come from the government source that posted it. Updated .