SALIENT CHARACTERISTICS.pdf
PDF 142 KB Posted
- Attached to
- HORIZONTAL MACHINING CENTER Federal contract opportunity
- Solicitation number
- SPMYM223Q1778
About this file
This document outlines the salient characteristics for a CNC horizontal machining center procurement. The machining center must have at minimum 64-inch x-direction and 50-inch y-direction travel with 32-inch z-direction travel. Additional required features include a 50-taper spindle with 30HP 2-speed geared head, 50+1 side-mount tool changer, 600IPM rapids and 500IPM maximum cutting speeds, 95-gallon flood coolant system, 15-inch color LCD controller with 1GB program memory and 64GB solid state storage. The procurement also specifies integration of a 30-inch, 10,000-pound capacity 4th axis platter, oil skimmer, high pressure coolant, wireless probing system, operator training and installation services. These characteristics are referenced in federal contract opportunity SPMYM223Q1778 for a horizontal machining center being solicited by the Defense Logistics Agency Land and Maritime agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM2-23-Q-1778 Amendment 3.pdf | ||
| SPMYM2-23-Q-1778 Amendment 2.pdf | ||
| SPMYM2-23-Q-1778 Amendment.pdf | ||
| STATEMENT OF WORK (SOW).pdf | ||
| SPECIFICATION.pdf | ||
| CDRLs- EXHIBITS A-C.pdf | ||
| SPMYM2-23-Q-1778.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS CNC HORIZONTAL MACHINING CENTER
CNC Horizontal Machining Center (Haas EC-1600 or equivalent) to include the following minimum/equal features:
• Disassemble and Remove existing GPM Titan AFD 105 DRO Horizontal Boring Machine. Install new machine into same space.
• 64” “X-direction”, 50” “Y-direction”, 32” “Z-direction” (minimum).
• Table size 64” x 36”
• Max Table load 10,000 lbs. min.
• 50 taper spindle.
• 30Hp (22.4Kw) 2-speed geared head, 7,500 rpm.
• Electronic Thermal Compensation to compensate for the expansion and contraction of each linear axis.
• 50+1 side-mount tool changer.
• 600 ipm (15.2 m/min) rapids.
• Max Cutting 500 ipm (12.27 m/min).
• Automatic Chip Auger.
• 95-gallon (360 liter) flood coolant system.
• Enclosure Exhaust System.
• Controller Features- 15” color LCD monitor, Graphic Dry Run, Self-Diagnostics, USB port, Memory
Lock Keyswitch, Color Remote Jog Handle, Rigid Tapping, Advanced Pocket Milling, Tool Life Management, Background Editing, Media Display M-Code, M-130, Remote Monitoring, 1 GB program memory, Ethernet Interface and Power Failure Detection Module.
• 8M, 8 additional M-code outputs.
• 64GB Expanded on-board solid state memory.
• HSM, High-Speed Machining.
• DWO/TCPC, G254 Dynamic work offset (DWO) and G234 Tool Center Point Control (TCPC) software features to simplify set-ups.
• WIPS-R, Wireless Intuitive Probing System, Haas Visual Programming System including macros, spindle orientation coordinate rotation and scaling.
• 4AX-E16 full 4th axis platter integrated into the table provides fully interpolated motion for contouring and positioning of large parts. Platter diameter is 30” with a 10,000lb weight capacity.
• OIL-SKIMMER, Automatic Coolant Oil Skimmer.
• High Pressure Coolant System.
• WRK TBL EC1600-24V Work table light 24V magnetic mount LED
• HD HV-ISO-XFRMR, Heavy Duty Internal High-Voltage Isolated Transformer for 440VAC operation.
• XL Machine Anchoring Kit.
• IUID_Tag, IUID tag plate per MIS-STD-130x.
• Four (4) days operator/programming training, on-site.
• One (1) days maintenance training, on-site.
• NRTL inspection.
• “Turn Key” Installation.
• Freight, Package Freight.
File details come from the government source that posted it. Updated .