Salient Characteristics 2024 Endodry Pass Thru.pdf
PDF 173 KB Posted
- Attached to
- Pass-Thru Endo Dryers Federal contract opportunity
- Solicitation number
- 36C257-25-AP-1769
About this file
This is a Salient Characteristics document describing specifications for a pass-through endoscope drying and storage system, specifically referencing the Steris Endodry Drying & Storage System (DRY2001) or equal. The document outlines technical requirements including construction of stainless steel, electrical specifications of 100-240 VAC, 50/60Hz with 75W power input, and dimensions of 75"H x 24"W x 22"D.
The system must provide controlled drying and storage of endoscopes after reprocessing, with capability to dry internal channels in one hour and external surfaces in three hours. Key features include barcode reader for tracking and user authorization, programmable storage time, alarm systems for pressure/power loss, digital documentation, multilingual control panel, and two-sided design. This specification is part of a Department of Veterans Affairs pre-solicitation for the VA North Texas Health Care System, with responses due by February 5, 2025. Vendors must indicate their business status (Small Business, SDVOSB, VOSB, or WOSB) and whether they manufacture the product or specify country of manufacture.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Statement of Work Equipment Steris Endodry Pass Thru Cabinet 1.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Descriptions.
The purchase description should identify the requirement in terms that enable contractors to offer commercial supplies or services. The description should not be restrictive and not be limited to one product peculiar to a manufacturer (e.g., by manufacturer, brand name and Part Number) unless it is essential to the Government’s minimum requirement.
A purchase description should include the following characteristics based on the requirement to adequately describe the Government’s needs:
(Please fill in the blocks provided with the information that is requested. If not applicable, then so state)
a. Common Nomenclature (commercial description): PLEASE ADD Brand Name or Equal Steris Endodry Drying & Storage System (DRY2001) b.
Kind of material (i.e., type, grade, alternatives, etc.): Stainless steel
c. Electrical Data (i.e., 110 v, 60 Hz, 3 Ph, etc.): 100-240 VAC, 50/60HZ, Power Input: 75W, Fuse: T2A (internal device) 15A (circuit)
d. Dimensions, size, capacity: 75 H x 24 W x 22 D (inches) 190 H x 60 W x 54 D (cm)
e. Principles of operation:
After processing in an ADVANTAGE PLUS AER, the endoscope is transferred to the ENDODRY Drying & Storage System in its cassette, then uses external instrument grade compressed air to aid in the amount of time needed for the drying process of a flexible endoscope.
Assists with the endoscope drying process in as little as one hour for the internal channels and three hours for the external endoscope surfaces. The cassette then maintains the status of a patient-ready endoscope.
Efficient pass-thru drying with minimal handling of endoscopes while meeting recommendations for unidirectional processing.
f. Restrictive environmental conditions:
g. Intended use:
• Provides a controlled environment for the drying and storage of endoscopes after a successful reprocessing cycle.
• Assists with the endoscope drying process in as little as one hour for the internal channels and three hours for the external portion
• For use with the ADVANTAGE PLUS™ AER and cassette to minimize handling
h. Equipment with which the item is used with (N/A if not applicable):
N/A
i. End item application:
j. Original equipment manufacturer part number:
k. Other pertinent information that describes the item, material or service required:
Endodry:
• Barcode reader for consistent data entry, endoscope tracking and user authorization
• Programmable maximum storage time
• Alarm in case of pressure or power loss
• Internal digital documentation of process parameters
• Integrated multi-lingual information and control panel
• Two-sided
• Utilizes hands-free scope handling system for HLD, drying, storage and transport
File details come from the government source that posted it. Updated .