RFQ N6945021Q0009 CLEAN KITCHEN EXHAUST.pdf

REQUEST FOR QUOTATION: N69450-21-Q-0009

COMMERCIAL ACQUISITION – CLEAN KITCHEN EXHAUST

SYSTEMS, NAVAL AIR STATION , MERIDIAN, MS 39309

INSTRUCTIONS TO OFFERORS

1. Quotations are sought for the work described in the enclosed documents. To submit a quotation, complete and return the following documents:

RETURN THE FOLLOWING DOCUMENTS WITH YOUR QUOTATION:

(1) "Request for Quotations" (SF-18) (SF18); complete Blocks 12 through 16, returning one copy to the address listed in Block 5A by the date specified in Block 10.

(2) One completed set of "Representations and Certifications" Section K

2. Offer’s may be delivered: 1) In Person,

2) By Fax (601) 679-2147, or

3) By Mail.

3. Discounts offered may be taken but will not be evaluated for award purposes.

4. All inquiries concerning any part of the specification must be made in writing to FEAD, PUBLIC WORKS DEPARTMENT, 427 Allen Road, Meridian, MS 39309-5427, FAX number (601) 679-2147, or E-mail to lea.giancola@navy.mil

5. Offerors or quoters are encouraged to schedule site visit by Ms. Lea Giancola, 601-480-4246.

6. Offers will not be disclosed publicly at any time.

7. The estimated cost of this project is under $100,000.00. Bonds are not required.

This COMMERCIAL acquisition Request for Quotations is 100% SET ASIDE FOR SMALL BUSINESS under the NAICS code 561790. Quotes are due on or before 1600, 16 February 2021.

mailto:lea.giancola@navy.mil

PWD MERIDIAN

INSPECTOR OF RECORD

229 ALLEN RD, BLDG 427

NAS MERIDIAN

MERIDIAN MS 39309-5427

TEL: 601-679-2179 FAX:

ACQR5848122

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

N6945021Q0009 02-Feb-2021 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ X[ ] IS [ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

NAVFAC ENGINEERING SYSTEMS COMMAND SE

PWD MERIDIAN

229 ALLEN ROAD, BLDG 427

NAS MERIDIAN

MERIDIAN MS 39309-5427

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ]X FOB

DESTINATION

[ ] OTHER

(See Schedule)

16-Feb-2021(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

(601) 679-2168LEA GIANCOLA

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

N6945021Q0009

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Task Clean Kitchen Exhaust Base Option

FFP

The Contractor shall furnish all labor, supervision, materials, supplies, equipment, management and transporation to perform the cleaning of the grease and vapor exhaust system in five (5) buildings on a quarterly basis or as specified. All work will be in accordance with attached scope of work. all work is located at NAS meridian MS 39309 FOB: Destination

PURCHASE REQUEST NUMBER: ACQR5848122

PSC CD: Z1FD

NET AMT

0002 1 Task OPTION Clean Kitchen Exhaust First Option

FFP

The Contractor shall furnish all labor, supervision, materials, supplies, equipment, management and transporation to perform the cleaning of the grease and vapor exhaust system in five (5) buildings on a quarterly basis or as specified. All work will be in accordance with attached scope of work. all work is located at NAS meridian MS 39309 FOB: Destination

0003 1 Task OPTION Clean Kitchen Exhaust Second Option

FFP

The Contractor shall furnish all labor, supervision, materials, supplies, equipment, management and transporation to perform the cleaning of the grease and vapor exhaust system in five (5) buildings on a quarterly basis or as specified. All work will be in accordance with attached scope of work. all work is located at NAS meridian MS 39309

0004 1 Task OPTION Clean Kitchen Exhaust Third Option

FFP

The Contractor shall furnish all labor, supervision, materials, supplies, equipment, management and transporation to perform the cleaning of the grease and vapor exhaust system in five (5) buildings on a quarterly basis or as specified. All work will be in accordance with attached scope of work. all work is located at NAS meridian MS 39309

0005 1 Task OPTION Clean Kitchen Exhaust Fourth Option

FFP

The Contractor shall furnish all labor, supervision, materials, supplies, equipment, management and transporation to perform the cleaning of the grease and vapor exhaust system in five (5) buildings on a quarterly basis or as specified. All work will be in accordance with attached scope of work. all work is located at NAS meridian MS 39309

CLAUSES INCORPORATED BY REFERENCE

52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

JUN 2020

Section C - Descriptions and Specifications

STATEMENT OF WORK

1 = Annual 2 = Bi‐Annual 4 = Quarterly

CLEAN KITCHEN EXHAUST

BASE YEAR CLIN 0001 (March 2021 – September 2021)

BLDG

LOCATION

Description – Location and System Number of Systems

Occurrences per Year

Subtotal Total

CLIN 0001 BASE YEAR

BLDG 51 FIRE STATION – AIR FIELD

ECON-AIR HOOD EXHAUST Far Loren

Cook Company Model 10VCR 150V13D 1 2 $ $

SUBTOTAL $

BLDG 105 FIRE STATION – Admin Location

CAPTIVE AIRE MODEL

4824 ND-2-PSP-F 1 2 $ $

BLDG 257 GALLEY FACILITY

GAYLORD ELX SERIES

VENTILATION 2 3 $ $

System, Model ELX-GBD-BBC-CL-AS $

CAPTIVE AIRE MODEL 6030 ND-2 5 3 $ $

TOTAL BASE YEAR PRICE CLIN 0001 $

FIRST OPTION PERIOD CLIN 0002 (October 2021 through September 2022)

BLDG

LOCATION

Description - Location and System Number of Systems

Occasions per year

Subtotal Total

CLIN 0002 FIRST OPTION PERIOD

BLDG 51 FIRE STATION - Air Field ECON-AIR Hood Exhaust Far Loren Cook Company Model 150VCR 150V13D 1 2 $ $

VENTILATION 2 4 $ $

CAPTIVE AIRE MODEL 6030 ND-2 5 4 $ $

TOTAL FIRST OPTION PERIOD CLIN 0002 $

SECOND OPTION PERIOD CLIN 0003 (October 2022 through September 2023)

Description – Location and System Number of Systems

Occasions per year

Subtotal Total

CLIN 0003 SECOND OPTION PERIOD

BLDG 51 FIRE STATION - Air Field ECON-AIR Hood Exhaust Far Loren

TOTAL SECOND OPTION PERIOD PRICE CLIN 0003 $

THIRD OPTION PERIOD CLIN 0004 (October 2023 through September 2024)

Description – Location and System Number of Systems

Occasions per year

Subtotal Total

CLIN 0004 THIRD OPTION PERIOD

BLDG 51 FIRE STATION - Air Field ECON-AIR Hood Exhaust Far Loren

TOTAL THIRD OPTION PERIOD CLIN 0004 $

FOURTH OPTION PERIOD 0005 (October 2024 – September 2025)

Description –Location and System Number of Systems

Occasions per year

Subtotal Total

CLIN 0005 FOURTH OPTION PERIOD

BLDG 51 FIRE STATION - Air Field ECON-AIR Hood Exhaust Far Loren

TOTAL FOURTH OPTION PERIOD PRICE CLIN 0005 $

Revised: SCOPE OF WORK CLEAN KITCHEN EXHAUST SYSTEMS

NAS MERIDIAN MS

1. GENERAL REQUIREMENTS.

The Contractor shall furnish all labor, supervision, materials, supplies, tools, equipment, management and transportation to perform the cleaning of the grease and vapor exhaust system in THREE (3) buildings on a semi-annual or quarterly basis or as specified.

2. TERM OF CONTRACT.

The contract term shall be for a period of NINE months (9 months) commencing ten (10) days after the award. (Base period will be March 2021 through September 2021 (approximately eight months). This contract also has provision for four one-year (12 months) option periods. Length of the contract will not exceed 60 months. The option periods will be exercised by the Government, thirty (30) days prior to contract completion upon satisfactory performance by the Contractor.

3. SITE VISITATION.

Prior to submitting quotations, prospective bidders are invited to visit the site, inspect the work in place, and satisfy themselves as to the character and amount of work to be accomplished. All prospective bidders are encouraged to attend site visit to satisfy themselves as to the systems, locations and requirements to accomplish work as specified in solicitation.

4. DEFINITIONS

The terms used in these specifications shall have the meanings described below:

a. Grease and Vapor Exhaust Duct Systems: Shall comprise the entire duct system proper throughout its entirety, including hoods, filters, ducting, and exhaust fans, and all other appurtenances thereto (except minor interiors).

b. Exhaust Fans: Shall comprise the complete fan assembly, including the structural frame assembly, housing, fan blades, shafts, pulleys, braces, louvers, and all other appurtenances thereto (except motor interiors).

c. Hoods and Canopies: Shall comprise the sheet metal protection together with bracing and hangars, which cover stoves, grills, ovens, furnaces, dishwashers, pot washers, steam tables or other cooking equipment, and collects and diverts vapors into the duct system.

d. Cleaning: Shall comprise the complete removal and disposal of all grease, dirt, dust, lint, and other combustible foreign matter from the interior and exterior of all installed equipment to be serviced.

5. GOVERNMENT FURNISHED ITEMS.

a. The Government will not provide office space and or operational facilities to the Contractor. The Government will designate refuse containers near each building being serviced for trash disposal. Contractor is responsible for removal of all hazardous waste.

b. Availability of Utilities: The Government will furnish water and electrical current at existing outlets as may be required for the work to be performed under the contract at no cost to the Contractor. Information concerning the location of existing outlets may be secured from the Contracting Officer. The Contractor shall provide and maintain, at his expense, the necessary service lines from existing outlets to the site of work. The Government is not responsible to provide electrical or water in the event that there are none in close proximity to the required work.

6. CONTRACTOR FURNISHED ITEMS.

a. The Contractor shall provide all equipment, tools, drapes, PPE, materials, lifts, ladders and lines in sufficient quantities necessary to perform the requirements of this contract. The contractor will provide all incidental required items not specifically mentioned.

b. The Contractor is responsible for taking that action necessary to protect his supplies, materials, equipment, and the personal property of his employees from loss, damage, or theft. The Government does not assume liability for time, theft, accident or any other cause resulting in damage or loss of Contractor’s supplies, materials, equipment, or of personal property or belongings of his employees.

7. ORDER OF WORK, SCHEDULING, ACCESS TO BUILDINGS.

a. The work under this contract shall be performed at annual intervals (1 time), semi-annually, (twice a year), or quarterly intervals (four (4) times a year), unless specified otherwise. Services shall be accomplished during the months of April, July, October and January for quarterly work. Work for Annual will be accomplished during January and work designated for semi-annula will be in January and July of each year.. The contractor shall notify the Facility Support Contract Manager at the Contract Administration Division, Public Works Department phone:

(601) 679-3403 or (601) 679-2895 at least five (5) working days prior to coming to perform the services.

Contractor is required to give 48 hour notice if their scheduled timeframe changes. Government representative will notify each customer being serviced to confirm the scheduled time and to ensure that he can gain access to the building.

b. The Contractor shall arrange his work so as not to cause interference with normal conductance of Government business. Normal work hours for the station are 0700-1530 hours, Monday through Friday. It will be necessary to perform some work after normal working hours or at night in some buildings. The Contracting Officer must approve all work, after normal working hours. No work will be permitted on Saturdays or Sundays or on National Holidays.

8. PRE-PERFORMANCE CONFERENCE.

Prior to commencing work, the Contractor shall meet with the Contracting Officer, or his designated representative, at a time specified, to discuss and develop a mutual understanding relative to scheduling and administration of work. Base and Administrative regulations will be reviewed along with invoice procedures through iRAPT, formerly called Wide Area Workflow (WAWF). Pre-perfomrance conference will also clarify lay-down locations for contractor’s equipment, materials and lifts as required.

9. PERMITS AND RESPONSIBILITIES FOR WORK.

The contractor shall, without additional expense to the Government, obtain all license and permits required for the prosecution of the work. He shall be responsible for all damages to persons and/or property that occur as a result of his fault or negligence in connection with the prosecution of the work. He shall also be responsible for all materials delivered and work performed until completion and final acceptance, except for any completed unit therefore which theretofore may have been finally accepted.

10. FAC 5252.236-9303, ACCIDENT PREVENTION (JUN 1994)

(a) In order to provide safety controls for protection to the life and health of employees and other persons; for prevention of damage to property, materials, supplies, and equipment; and for avoidance of work interruptions in the performance of this contract, the Contractor shall comply with all pertinent provisions of the current edition of the Corps of Engineers Manual, EM 385-1-1, entitled “Safety and Health Requirements Manual” as amended, and will also take or cause to be taken such additional measures as the Contracting Officer may determine to be reasonably necessary for the purpose. The contractor will submit an AHA in accordance with the EM385-1-1.

(b) The Contractor will maintain an accurate record of, and will report to the Contracting Officer in the manner and on the forms prescribed by the Contracting officer, all accidents resulting in death, traumatic injury, occupational disease, and damage to property, materials, supplies and equipment incident to work performed under this contract.

(c) The Contracting Officer will notify the Contractor of any noncompliance with the foregoing provisions and the action to be taken. The Contractor shall, after receipt of such notice, immediately take corrective action. Such notice, when delivered to the Contractor or his representative at the site of the work, shall be deemed sufficient for the purpose. If the Contractor fails or refuses to comply promptly, the Contracting Officer may issue an order stopping all or part of work until satisfactory corrective action has been taken. No part of the time lost due to any such stop orders shall be made the subject of claim for extension of time or for excess costs or damages by the Contractor.

(d) Compliance with the provisions of this article by subcontractors will be the responsibility of the Contractor.

(e) Prior to commencement of the work, the Contractor may be required to:

(1) submit in writing his proposals for effectuation provision for accident prevention;

(2) meet in conference with representatives of the Contracting Officer to discuss and develop mutual understandings relative to administration of the overall safety program.

The clause, FAC 5252.236-9303, ACCIDENT PREVENTION, is hereby amended as follows: Prior to commencement of work the Contractor may be required to submit in writing a plan consisting of:

(1) An index of hazardous materials to be introduced to the site.

(2) Plan for protecting personnel and property during the transport, storage and use of the materials.

(3) Procedures for spill response and disposal.

(4) MSDS, Material Safety Data Sheets for hazardous materials listed in the index of the plan. Post Material Safety Data Sheets at the worksite where the products will be used.

(5) Approved labeling system to identify contents on all containers on site.

(6) Personnel training plan.

(7) AHA (Activity Hazard Analysis)

(8) Safety plan in accordance with EM385-1-1

Each hazardous material must receive approval prior to bringing onto the job site.

11. WASTE MANAGEMENT

Comply with all Federal, State, and Local regulations to include but not limited to the following:

a. Hazardous Solid Waste. All waste generated aboard NAS Meridian which meets the definition of hazardous waste, as defined by the Resource Conservation and Recovery Act (RCRA), must be handled, accumulated, stored, moved and disposed of in accordance with RCRA regulations for Large Quantity Generators (LOG). In accordance with the NAS Meridian Hazardous Waste Management Plan all hazardous waste shall be accumulated, in contractor supplied drums, at compliant satellite accumulation sites. When drums are full or when work is complete the contractor will transfer accumulated waste, fill records, and Material Safety Data Sheets (MSDS) to the NAS Meridian’s less than 90 day storage area for disposal.

b. Non-Hazardous Solid Waste. All non-hazardous waste must be disposed of in regulated landfills in accordance with RCRA regulations. Copies of tipping documents shall be provided to the contract manager/ROICC for accountability and reporting purposes.

c. Training. Personnel handling hazardous waste must have all requisite training required by RCRA, OSHA, and DOT regulations. Training Records must be available for review.

d. Emergency Planning and Community-Right-to-Know (EPCRA) Reporting. At a minimum the contractor shall report on materials stored at NAS Meridian containing any of the following: propane (including aerosol propellant), nitrogen, oxygen, chlorine, diesel fuel, and gasoline. Provide a written report to the Contracting Officer at the end of end of the contract period, and at end of year if the contract period extends past 31 December, giving the following information: maximum daily storage, average daily storage, and number of days on site for each of the materials specified.

12. HAZARDOUS MATERIAL INVENTORY AND USAGE LOG.

a. What to report: Typical materials requiring MSDS and quantity reporting include, but not limited to, oil and latex based painting and caulking products, solvents, adhesives, aerosol, and petroleum products.

b. When to report:

1. Initial. Before onsite work commences the Contractor shall submit a MSDS and estimated quantities to be used for each hazardous material to the Contracting Officer prior to bringing the material on base.

2. Progress. An updated monthly report is required with each invoice submitted for payment.

3. Final. A final report is required either, by the tenth of the month following the completion of work, or with the final invoice, which ever occurs first.

A. The final report will indicate the maximum quantity of each material that was present at the site at any time, the amount of each material that was used during the project and the final disposition of unused quantities.

B. The Contractor shall ensure that hazardous materials are utilized in a manner that will minimize the amount of hazardous waste that is generated.

C. The Contractor shall certify that all hazardous materials removed from the site are hazardous materials and do not meet the definition of hazardous waste per 40 CFR 261.

c. Use the form, “Contractor Monthly Hazardous Material Inventory And Usage Log” provided by the ROICC for reporting.

13. STATION REGULATIONS.

Contractor personnel employed on the Station shall become familiar with and obey Station regulations, shall keep within the limits of the work (and avenues of ingress and egress), and shall not enter any restricted areas unless required to do so and are cleared for such entry. Contractor equipment shall be conspicuously marked for identification.

14. DAMAGE REPORTS.

In all instances, where Government property or equipment damaged by Contractor’s Employees, a full report of the fact and extent of such damage shall be submitted to the Contracting Officer within 24 hours of occurrence.

15. DAMAGE TO GOVERNMENT PROPERTY.

Extreme care shall be exercised to avoid damage to buildings or their contents; any damage shall be repaired or replaced as directed, at no additional expense to the Government.

16. ACCIDENT REPORTING.

The contractor shall maintain an accurate record and, report to the Contracting Officer in the manner and on the forms prescribed by him, exposure data and all accidents resulting in death, traumatic injury, occupational disease, or damage to property, materials, supplies, and equipment incident to work performed under this contract.

Reporting will be in accordance with OSHA requirements.

17. INVOICING PROCEDURES.

The Contractor shall submit invoices through Wide Area Work Flow (WAWF). Each invoice is scanned and uploaded into WAWF and is to be accompanied by a Contractor’s worksheet showing a list of buildings with signatures of appointed representatives for each building certifying; that the work was accomplished. Additionally, contractor will submit with each quarterly invoice submitted a Hazardous Usage Log to reflect total usage for the quarter period invoicing for.

a. Invoices shall be prepared in the format of sample provided as Appendix A. Each invoice shall be for one quarter’s services or ¼ of the contract price.

b. Upon verification of work actually performed, invoices will be processed for payment.

18. INSPECTION-ACCEPTANCE OF WORK.

Each phase of the services rendered under this contract is subject to Government inspection during both the Contractor’s operations and after completion of the tasks. All unsatisfactory or incomplete work shall be made satisfactory to the Contracting Officer, or his designated representative. All costs associated with rework are the responsibility of the Contractor. The Contractor shall accompany the Government Inspector on a joint final inspection of all completed work prior to leaving the base. This joint inspection will be held during normal hours (0700-1530 hrs), Monday through Friday. It is the Contractor’s responsibility to schedule the final inspection with the Government Inspector. No payment will be authorized until a joint inspection is made and any noted deficiencies are corrected.

19. CONSEQUENCES OF CONTRACTOR’S FAILURE TO PERFORM REQUIRED

SERVICES.

a. The contractor will be held to the full performance of the contract. The Government will deduct from the Contractor’s invoice or otherwise withhold payment for any items of nonconforming service observed as specified below.

(1) A service task may be composed of several sub-items. A service task may be determined to be partially complete if the Contractor satisfactorily completes some, but not all of the sub-items. In those cases, partial deductions may be taken from the contractor’s invoice. The Government designates all rights for partially completed work as set forth below:

b. The Government will give the Contractor written notice of deficiencies by copies of the Inspector’s Daily Reports or otherwise prior to assessing liquidated damages or deducting for unsatisfactory or non-performed work.

(1) In the case of non-performed work, the Government:

(a) will deduct from Contractor’s invoice all amounts associated with such non-performed work at the rates set out in Section B or provided by other provisions of this contract, unless the Contractor is permitted or required to perform pursuant to (b) below and satisfactorily completes the work;

(b) may, at its option, afford the Contractor an opportunity to form the non-performed work within a reasonable period subject to the discretion of the Contracting Officer, but in no event longer than six (6) hours in the case of daily services, or twenty-four (24) hours in the case of all other services, of the notice to the Contractor of such non-performance, at no additional cost to the Government; or

(c ) may, at its option, perform the services by Government personnel or other means.

(2) In the case of unsatisfactory work; the Government:

(a) shall deduct from the Contractor’s invoice all amounts associated with such unsatisfactory work at the rates set out in Section B or provided by other provisions of the contract, unless the Contractor is afforded an opportunity to re-perform to (b) below and satisfactorily completes the work;

(b) may, at its option, afford the Contractor an opportunity to re-perform the unsatisfactory work within a reasonable period subject to the discretion of the Contracting Officer, but in no event longer than six (6) hours in the case of daily services, or within twenty-four (24) hours in the case of all other services, of the notice to the Contractor of such unsatisfactory performance, at no additional cost to the Government; or

(c) may, at its option, have the service performed by Government personnel or other means.

c. Should the Government elect options b. (1) (a), b. (1) (b), b. (2) (a) or b. (2) (b) above, the Government will also assess, as liquidated damages, an additional 10% of an amount associated solely for observed defects. The liquidated damages are to compensate the Government for administrative costs and other expenses resulting from the non-performance or unsatisfactory performance.

d. Should the Government elect options b (1) (c ) or b. (2) above, the Government will reduce the contract payment, by the amount paid to any Government personnel (based on wages, retirement and fringe benefits) plus materials, or the actual cost of other means that accomplished the services. If the actual costs cannot be readily determined, the Schedule of Deductions will be utilized in establishing a deduction amount. In addition to either payment deduction; the Government will assess an additional 20% in liquidated damages to compensate the Government for administrative costs and other expenses incurred by the Government to obtain satisfactory completion of the services.

e. The Government’s exercise of rights, under this clause, shall not preclude either (1) single occurrences of such non-performance or unsatisfactory performance, or (2), multiple occurrences of non-performances, or unsatisfactory performances. Regardless of whether deductions were taken for termination for default in accordance with the Clause entitled “DEFAULT (FIXED Price Supply and Service (AAPR 1984)” of Section I.

20. CLEANING OF KITCHEN EXHAUST SYSTEMS.

a. Scope of Work. The Contractor shall furnish all necessary labor, transportation, equipment, toolds, lifts, ladders, materials, supplies, and supervision to perform all cleaning operations in connection with removing all grease, lint, dirt, and other combustible materials in the exhaust systems in the specified buildings. The method of cleaning is to be determined by the Contractor.

(1) This is a fire hazard reduction function, and the Contractor shall work in strict accordance with the standards set forth by the National Fire Protection Association (NFPA) Code 96, and the National Safety Council.

All work performed under this contract will be accomplished in occupied areas. The Contractor and building occupants, where the work will be performed, will coordinate the work, whereby, both the Government and the Contractor may continue operations with as little interruption and inconvenience as possible during the cleaning and treating of the grease and vapor exhaust systems. Some buildings will require work to be accomplished after normal working hours. This will be coordinated between contractor, COR and the building manager. Contractor must satisfy himself to time designated for work prior to providing quote for this work.

(2) The Contractor shall work in strict accordance with the codes of the National Board of Fire Underwriters.

While working on installed mechanical equipment contractor shall use drop cloths, shields, and other protective devices to prevent any damage to equipment or to areas adjacent to units being cleaned, and will move all movable furniture, fixtures, and/or equipment that may interfere with the work subject. The Contractor shall re-position the same items stipulated above, upon completion of work in each area, and shall clean the area in which work was performed. All bracing, rafters and adjacent structural members, and equipment will be kept clean and cleaned after operations are completed. The Contractor shall thoroughly inspect all attic and roof areas for grease and other combustible or inflammable contamination caused by leakage or seepage from the duct work plenums, fan housings or fans. Where such contamination is found, the Contractor shall thoroughly remove the same.

(3) All grease, lint, dust or dirt, and other contamination removed from any area shall be gathered and removed from each site by the contractor and disposed of as directed by the Contracting Officer. Filters, where they are to be installed in grease and vapor exhaust systems, shall be thoroughly cleaned and replaced.

(4) Any access panels or openings necessary for the physical entry into portions of the grease exhaust systems shall be made and installed by the Contractor at no additional cost to the Government. The installation of access panels shall consist of installing a standard opening in the duct system, whereby, cleaning can be accomplished by physical entry into the duct. Such openings shall be fitted with sheet metal covers tightly installed and caulked to prevent a by-pass of air and seepage of the re-accumulation of grease. Any damage to duct systems by the Contractor shall be promptly repaired by skilled workman of the craft involved at no additional expense to the Government.

(5) The Contractor must certify that all chemicals utilized in the performance of this work will be non-toxic, non-corrosive, odorless, and of non-flammable standards.

(6) Cleaning service is not to interfere with normal operations of the buildings and galleys listed in paragraph 7.b., and when interference does occur, an after-hours procedure is necessary. When all cleaning procedures are completed, all; electrical switches, detection devices, and system components, shall be returned to an operable state by qualified personnel. Cover plates shall be replaced and dampers and diffuses shall be positioned for proper airflow. The Contractor shall check and insure that each exhaust system is operating after completion of all his work and before he leaves a building. The Contractor shall clean up all work areas before leaving a building.

(7) Time of servicing. When four services (quarterly services) per year are required, they shall be performed during April, July, October and January. FOR FIRST PERIOD (Base period) OF PERFORMANCE, QUARTERLY CLEANINGS WILL BE MARCH, JUNE, AUGUST in order to receive quarterly cleanings based on award date. Base period of performance will be approximately eight months (March through September) or from date of award through 30 September 2021.

b. General Description: There are two (2) buildings on Naval Air Station, Meridian, MS and one (1) building at Joe Williams Field, DeKalb, MS, which have one or more kitchen exhaust systems which are to be cleaned and treated when specified under this contract.

For the purposes of bidding, each CLIN is broken down by building number, system description as well as frequency of service. There are detailed breakdown sheets provided for each CLIN.

Contractor shall fill out his location price and provide subtotal for all work under each CLIN.

The total price for each CLIN shall be input under Section B. The prices submitted for each location on each CLIN will be used in the event that deductions are required for unsatisfactory work. When Option is exercised the resulting CLIN prices will be affective for that period of performance.

The exhaust-system in each building as described below are to be cleaned as specified:

(Base Period of Performance will be for 3 cleaning occasions for building 257) Remainder of option periods will be as stated below:

Building Number Kitchen Exhaust

System Number of Systems

Number of Occasions a Year

Location

51 – Fire Station ECON-AIR Hood Exhaust Fan Loren Cook Company.

Model 150VCR 150V13D

1 2 Meridian, MS

105 – Fire Station CaptiveAire Model

4824 ND-2-PSP-F

1 2 DeKalb, MS

257 -Galley GAYLORD ELX Series Ventilation System, Model

ELX-GBD-BBC-

CL-AS

2 4 Meridian, MS

257 -Galley

CaptiveAire Model

6030 ND-2

Meridian, MS

THE CONTRACTOR IS TO SATISFY THEMSELVES WITH THE CLEANING REQUIREMENTS AND

PROCEDURES OF EACH SPECIFIC MODEL PRIOR TO QUOTING; THE GOVERNMENT WILL NOT

CONSIDER REQUESTS TO ADJUST PRICES BASED ON FAILURE TO UNDERSTAND

REQUIREMENTS FROM CONTRACTORS AFTER AWARD.

Price per building location should reflect all costs associated with cleaning to include system access and after hour access and work.

End of Section

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5170 Daniel W. Simms Division of | Revision No.: 13 Director Wage Determinations| Date Of Last Revision: 05/22/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Mississippi

Area: Mississippi Counties of Clarke Greene Jasper Jones Kemper Lauderdale Neshoba Newton Wayne

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 12.97 01012 - Accounting Clerk II 14.57 01013 - Accounting Clerk III 16.30 01020 - Administrative Assistant 18.22 01035 - Court Reporter 15.92 01041 - Customer Service Representative I 10.79 01042 - Customer Service Representative II 12.13 01043 - Customer Service Representative III 13.24 01051 - Data Entry Operator I 13.77 01052 - Data Entry Operator II 15.02 01060 - Dispatcher Motor Vehicle 18.44 01070 - Document Preparation Clerk 12.68 01090 - Duplicating Machine Operator 12.68 01111 - General Clerk I 11.96 01112 - General Clerk II 13.05 01113 - General Clerk III 14.65 01120 - Housing Referral Assistant 17.75 01141 - Messenger Courier 12.13 01191 - Order Clerk I 12.61 01192 - Order Clerk II 13.75 01261 - Personnel Assistant (Employment) I 14.88 01262 - Personnel Assistant (Employment) II 16.64

01263 - Personnel Assistant (Employment) III 18.55 01270 - Production Control Clerk 20.87 01290 - Rental Clerk 12.83 01300 - Scheduler Maintenance 14.23 01311 - Secretary I 14.23 01312 - Secretary II 15.92 01313 - Secretary III 17.75 01320 - Service Order Dispatcher 16.48 01410 - Supply Technician 18.22 01420 - Survey Worker 13.12 01460 - Switchboard Operator/Receptionist 12.05 01531 - Travel Clerk I 11.90 01532 - Travel Clerk II 12.56 01533 - Travel Clerk III 13.20 01611 - Word Processor I 12.68 01612 - Word Processor II 14.23 01613 - Word Processor III 15.92 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 17.84 05010 - Automotive Electrician 16.95 05040 - Automotive Glass Installer 16.02 05070 - Automotive Worker 16.02 05110 - Mobile Equipment Servicer 14.03 05130 - Motor Equipment Metal Mechanic 17.88 05160 - Motor Equipment Metal Worker 16.02 05190 - Motor Vehicle Mechanic 17.88 05220 - Motor Vehicle Mechanic Helper 13.11 05250 - Motor Vehicle Upholstery Worker 15.02 05280 - Motor Vehicle Wrecker 16.02 05310 - Painter Automotive 16.95 05340 - Radiator Repair Specialist 16.02 05370 - Tire Repairer 15.07 05400 - Transmission Repair Specialist 17.88 07000 - Food Preparation And Service Occupations 07010 - Baker 11.12 07041 - Cook I 9.27 07042 - Cook II 10.59 07070 - Dishwasher 8.87 07130 - Food Service Worker 8.90 07210 - Meat Cutter 12.22 07260 - Waiter/Waitress 9.00 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 20.44 09040 - Furniture Handler 13.48 09080 - Furniture Refinisher 20.44 09090 - Furniture Refinisher Helper 15.73 09110 - Furniture Repairer Minor 18.12 09130 - Upholsterer 20.44 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 12.44 11060 - Elevator Operator 11.24 11090 - Gardener 15.31 11122 - Housekeeping Aide 9.67 11150 - Janitor 9.67 11210 - Laborer Grounds Maintenance 12.00

11240 - Maid or Houseman 9.68 11260 - Pruner 10.90 11270 - Tractor Operator 14.23 11330 - Trail Maintenance Worker 12.00 11360 - Window Cleaner 10.65 12000 - Health Occupations 12010 - Ambulance Driver 15.20 12011 - Breath Alcohol Technician 17.41 12012 - Certified Occupational Therapist Assistant 29.98 12015 - Certified Physical Therapist Assistant 26.42 12020 - Dental Assistant 14.83 12025 - Dental Hygienist 27.86 12030 - EKG Technician 20.95 12035 - Electroneurodiagnostic Technologist 20.95 12040 - Emergency Medical Technician 15.20 12071 - Licensed Practical Nurse I 15.56 12072 - Licensed Practical Nurse II 17.41 12073 - Licensed Practical Nurse III 19.41 12100 - Medical Assistant 13.39 12130 - Medical Laboratory Technician 18.05 12160 - Medical Record Clerk 14.26 12190 - Medical Record Technician 15.96 12195 - Medical Transcriptionist 14.58 12210 - Nuclear Medicine Technologist 38.25 12221 - Nursing Assistant I 10.55 12222 - Nursing Assistant II 11.86 12223 - Nursing Assistant III 12.94 12224 - Nursing Assistant IV 14.52 12235 - Optical Dispenser 14.97 12236 - Optical Technician 15.56 12250 - Pharmacy Technician 15.50 12280 - Phlebotomist 12.54 12305 - Radiologic Technologist 21.09 12311 - Registered Nurse I 22.34 12312 - Registered Nurse II 27.33 12313 - Registered Nurse II Specialist 27.33 12314 - Registered Nurse III 33.07 12315 - Registered Nurse III Anesthetist 33.07 12316 - Registered Nurse IV 39.64 12317 - Scheduler (Drug and Alcohol Testing) 21.56 12320 - Substance Abuse Treatment Counselor 18.51 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 16.82 13012 - Exhibits Specialist II 20.83 13013 - Exhibits Specialist III 25.48 13041 - Illustrator I 16.82 13042 - Illustrator II 20.83 13043 - Illustrator III 25.48 13047 - Librarian 23.07 13050 - Library Aide/Clerk 13.39 13054 - Library Information Technology Systems 20.83 Administrator 13058 - Library Technician 16.28 13061 - Media Specialist I 15.03 13062 - Media Specialist II 16.82

13063 - Media Specialist III 18.75 13071 - Photographer I 15.03 13072 - Photographer II 16.82 13073 - Photographer III 20.83 13074 - Photographer IV 25.48 13075 - Photographer V 30.83 13090 - Technical Order Library Clerk 16.82 13110 - Video Teleconference Technician 15.03 14000 - Information Technology Occupations 14041 - Computer Operator I 15.86 14042 - Computer Operator II 16.36 14043 - Computer Operator III 19.55 14044 - Computer Operator IV 21.73 14045 - Computer Operator V 24.07 14071 - Computer Programmer I (see 1) 19.15 14072 - Computer Programmer II (see 1) 23.73 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.86 14160 - Personal Computer Support Technician 21.73 14170 - System Support Specialist 23.98 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.86 15020 - Aircrew Training Devices Instructor (Rated) 34.91 15030 - Air Crew Training Devices Instructor (Pilot) 41.84 15050 - Computer Based Training Specialist / Instructor 28.86 15060 - Educational Technologist 28.83 15070 - Flight Instructor (Pilot) 41.84 15080 - Graphic Artist 17.31 15085 - Maintenance Test Pilot Fixed Jet/Prop 41.84 15086 - Maintenance Test Pilot Rotary Wing 41.84 15088 - Non-Maintenance Test/Co-Pilot 41.84 15090 - Technical Instructor 20.71 15095 - Technical Instructor/Course Developer 25.33 15110 - Test Proctor 16.72 15120 - Tutor 16.72 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.34 16030 - Counter Attendant 9.34 16040 - Dry Cleaner 10.90 16070 - Finisher Flatwork Machine 9.34 16090 - Presser Hand 9.34 16110 - Presser Machine Drycleaning 9.34 16130 - Presser Machine Shirts 9.34 16160 - Presser Machine Wearing Apparel Laundry 9.34 16190 - Sewing Machine Operator 11.45 16220 - Tailor 11.97 16250 - Washer Machine 9.85 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 18.81 19040 - Tool And Die Maker 22.63 21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 14.67 21030 - Material Coordinator 20.87 21040 - Material Expediter 20.87 21050 - Material Handling Laborer 11.47 21071 - Order Filler 11.27 21080 - Production Line Worker (Food Processing) 14.67 21110 - Shipping Packer 14.44 21130 - Shipping/Receiving Clerk 14.44 21140 - Store Worker I 12.85 21150 - Stock Clerk 17.14 21210 - Tools And Parts Attendant 14.67 21410 - Warehouse Specialist 14.67 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 27.60 23019 - Aircraft Logs and Records Technician 22.06 23021 - Aircraft Mechanic I 26.29 23022 - Aircraft Mechanic II 27.60 23023 - Aircraft Mechanic III 28.99 23040 - Aircraft Mechanic Helper 19.33 23050 - Aircraft Painter 24.77 23060 - Aircraft Servicer 22.06 23070 - Aircraft Survival Flight Equipment Technician 24.77 23080 - Aircraft Worker 23.47 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 23.47 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 26.29

II

23110 - Appliance Mechanic 20.33 23120 - Bicycle Repairer 16.83 23125 - Cable Splicer 33.78 23130 - Carpenter Maintenance 18.10 23140 - Carpet Layer 19.22 23160 - Electrician Maintenance 25.97 23181 - Electronics Technician Maintenance I 26.02 23182 - Electronics Technician Maintenance II 27.62 23183 - Electronics Technician Maintenance III 29.14 23260 - Fabric Worker 18.02 23290 - Fire Alarm System Mechanic 20.69 23310 - Fire Extinguisher Repairer 16.83 23311 - Fuel Distribution System Mechanic 16.99 23312 - Fuel Distribution System Operator 13.34 23370 - General Maintenance Worker 15.18 23380 - Ground Support Equipment Mechanic 26.29 23381 - Ground Support Equipment Servicer 22.06 23382 - Ground Support Equipment Worker 23.47 23391 - Gunsmith I 16.83 23392 - Gunsmith II 19.22 23393 - Gunsmith III 21.44 23410 - Heating Ventilation And Air-Conditioning 19.10 Mechanic 23411 - Heating Ventilation And Air Contidioning 20.04 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 20.89 23440 - Heavy Equipment Operator 17.55 23460 - Instrument Mechanic 21.44

23465 - Laboratory/Shelter Mechanic 20.33 23470 - Laborer 11.47 23510 - Locksmith 20.33 23530 - Machinery Maintenance Mechanic 20.86 23550 - Machinist Maintenance 19.68 23580 - Maintenance Trades Helper 13.30 23591 - Metrology Technician I 21.44 23592 - Metrology Technician II 22.49 23593 - Metrology Technician III 23640 - Millwright 23.81 23710 - Office Appliance Repairer 18.81 23760 - Painter Maintenance 16.08 23790 - Pipefitter Maintenance 20.56 23810 - Plumber Maintenance 19.46 23820 - Pneudraulic Systems Mechanic 21.44 23850 - Rigger 21.44 23870 - Scale Mechanic 19.22 23890 - Sheet-Metal Worker Maintenance 16.99 23910 - Small Engine Mechanic 19.22 23931 - Telecommunications Mechanic I 31.31 23932 - Telecommunications Mechanic II 32.84 23950 - Telephone Lineman 22.62 23960 - Welder Combination Maintenance 18.43 23965 - Well Driller 22.26 23970 - Woodcraft Worker 21.44 23980 - Woodworker 16.83 24000 - Personal Needs Occupations 24550 - Case Manager 12.96 24570 - Child Care Attendant 8.97 24580 - Child Care Center Clerk 11.19 24610 - Chore Aide 10.63 24620 - Family Readiness And Support Services 12.96 Coordinator 24630 - Homemaker 12.96 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 21.44 25040 - Sewage Plant Operator 17.94 25070 - Stationary Engineer 21.44 25190 - Ventilation Equipment Tender 15.65 25210 - Water Treatment Plant Operator 17.94 27000 - Protective Service Occupations 27004 - Alarm Monitor 11.45 27007 - Baggage Inspector 12.58 27008 - Corrections Officer 12.77 27010 - Court Security Officer 14.16 27030 - Detection Dog Handler 14.08 27040 - Detention Officer 12.77 27070 - Firefighter 14.65 27101 - Guard I 12.58 27102 - Guard II 14.08 27131 - Police Officer I 15.46 27132 - Police Officer II 17.18 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.35 28042 - Carnival Equipment Repairer 14.69 28043 - Carnival Worker 10.30

28210 - Gate Attendant/Gate Tender 13.21 28310 - Lifeguard 11.77 28350 - Park Attendant (Aide) 14.78 28510 - Recreation Aide/Health Facility Attendant 10.79 28515 - Recreation Specialist 18.31 28630 - Sports Official 11.77 28690 - Swimming Pool Operator 20.92 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 19.62 29020 - Hatch Tender 19.62 29030 - Line Handler 19.62 29041 - Stevedore I 18.39 29042 - Stevedore II 20.75 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 39.89 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.50 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.29 30021 - Archeological Technician I 16.38 30022 - Archeological Technician II 18.33 30023 - Archeological Technician III 22.70 30030 - Cartographic Technician 22.70 30040 - Civil Engineering Technician 18.87 30051 - Cryogenic Technician I 25.14 30052 - Cryogenic Technician II 27.77 30061 - Drafter/CAD Operator I 16.38 30062 - Drafter/CAD Operator II 18.33 30063 - Drafter/CAD Operator III 20.43 30064 - Drafter/CAD Operator IV 25.14 30081 - Engineering Technician I 15.77 30082 - Engineering Technician II 17.69 30083 - Engineering Technician III 19.80 30084 - Engineering Technician IV 24.52 30085 - Engineering Technician V 30.00 30086 - Engineering Technician VI 36.30 30090 - Environmental Technician 23.03 30095 - Evidence Control Specialist 22.70 30210 - Laboratory Technician 21.05 30221 - Latent Fingerprint Technician I 25.14 30222 - Latent Fingerprint Technician II 27.77 30240 - Mathematical Technician 22.70 30361 - Paralegal/Legal Assistant I 16.45 30362 - Paralegal/Legal Assistant II 21.07 30363 - Paralegal/Legal Assistant III 22.77 30364 - Paralegal/Legal Assistant IV 27.56 30375 - Petroleum Supply Specialist 27.77 30390 - Photo-Optics Technician 23.03 30395 - Radiation Control Technician 27.77 30461 - Technical Writer I 22.70 30462 - Technical Writer II 27.77 30463 - Technical Writer III 33.60 30491 - Unexploded Ordnance (UXO) Technician I 25.35 30492 - Unexploded Ordnance (UXO) Technician II 30.67 30493 - Unexploded Ordnance (UXO) Technician III 36.76 30494 - Unexploded (UXO) Safety Escort 25.35 30495 - Unexploded (UXO) Sweep Personnel 25.35

30501 - Weather Forecaster I 25.14 30502 - Weather Forecaster II 30.58 30620 - Weather Observer Combined Upper Air Or (see 2) 20.43 Surface Programs 30621 - Weather Observer Senior (see 2) 23.03 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.67 31020 - Bus Aide 12.45 31030 - Bus Driver 16.98 31043 - Driver Courier 13.98 31260 - Parking and Lot Attendant 12.16 31290 - Shuttle Bus Driver 15.20 31310 - Taxi Driver 13.89 31361 - Truckdriver Light 15.20 31362 - Truckdriver Medium 15.97 31363 - Truckdriver Heavy 19.34 31364 - Truckdriver Tractor-Trailer 19.34 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.95 99030 - Cashier 9.39 99050 - Desk Clerk 9.21 99095 - Embalmer 22.74 99130 - Flight Follower 25.35 99251 - Laboratory Animal Caretaker I 13.21 99252 - Laboratory Animal Caretaker II 14.21 99260 - Marketing Analyst 28.68 99310 - Mortician 22.74 99410 - Pest Controller 14.89 99510 - Photofinishing Worker 13.32 99710 - Recycling Laborer 13.29 99711 - Recycling Specialist 15.76 99730 - Refuse Collector 12.07 99810 - Sales Clerk 12.08 99820 - School Crossing Guard 14.26 99830 - Survey Party Chief 18.37 99831 - Surveying Aide 11.95 99832 - Surveying Technician 16.70 99840 - Vending Machine Attendant 16.07 99841 - Vending Machine Repairer 20.36 99842 - Vending Machine Repairer Helper 16.07

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year.