RFB 48-2025 Crocker Ditch final.pdf

City of Boulder, CO RFB No. 48-2025

CITY OF BOULDER, COLORADO

Finance Department / Purchasing Division 1136 Alpine P.O. Box 791 Boulder, Colorado 80306 Telephone: 303-413-7429 Email: mccreeryc@bouldercolorado.gov

REQUEST FOR BIDS

RFB NO. 48-2025

Crocker Ditch Measurement & Splitter Structure Replacement

ISSUE DATE: September 12, 2025

DUE DATE: 4:00 PM, Friday, October 3, 2025 Bids to be electronically saved to the Bidnet website PRIOR TO Proposal Due Date and Time above.

CONTACT:

Brian Walton

Water Resources Senior Program Manager 720-417-4976 waltonb@bouldercolorado.gov mailto:mccreeryc@bouldercolorado.gov mailto:bacab@bouldercolorado.gov

CITY OF BOULDER

NOTICE OF REQUEST FOR BIDS

RFB NO. 48-2025

Crocker Ditch Measurement & Splitter Structure Replacement

The City of Boulder (“City”), by and through its Open Space and Mountain Parks, is seeking services for irrigation ditch diversion structure replacement and measurement device installation. This project will consist of replacing the existing concrete diversion, installing Parshall flumes, and improving surrounding earthen ditch grades.

Bidnet – Required. Solicitation documents will be issued electronically only. A copy of this Request for Bids (RFB) must be obtained only from the Rocky Mountain E-Purchasing System (Bidnet) at:

www.bidnetdirect.com/colorado. Any modifications to this RFB or addenda pertaining to this RFB will be published to the above-mentioned website, and all bidders are responsible to periodically check the website for relevant updates prior to the submittal of a proposal.

Response to RFB. The City will only accept electronic submissions saved to the Bidnet website in response to this RFB. Electronic submissions are required to be considered for an award. To submit your RFB, please visit . Please authorize receiving notices through Bidnet relating to this procurement.

Deadline. The submission deadline is Friday, October 3, 2025, at 4:00 p.m. Mountain Time. This deadline is mandatory. You must save your submission to the Bidnet website before the deadline. Failure to do so may result in an inability to submit a response that is automatically implemented in the software. Except as set forth herein, no exceptions will be allowed. The City specifically reserves the right to reject late submissions.

Technical Submission Issues. In extraordinary circumstances, the City may permit late submissions if the City, in its sole discretion, determines the bidder has shown good cause due to technical issues. If you experience problems submitting your electronic response, please contact the Bidnet Direct technical support team (800-835-4603) prior to the submission deadline and document the technical errors and your efforts to resolve the same before the submission deadline. Bidders are encouraged to document that their Bidnet submission was saved in case technical issues arise or are later discovered. Your documentation may include e-mailing your submission to mccreeryc@bouldercolorado.gov provided such submission is emailed by the deadline or immediately upon discovery of the issue. An emailed submission does not substitute the requirement for an electronic submission using Bidnet. By this paragraph, the City does not guarantee it will accept submissions that experience technical issues.

Costs. Proposals shall be prepared at the bidder’s sole expense.

Public Record. Bid submissions are public records and subject disclosure under the Colorado Open Records Act (CORA).

Confidential Data. All submitted materials are presumed to be public records. However, confidential data, if unambiguously identified as such, will be held confidential upon request if: (1) it is clearly and unambiguously identified, (2) the request is made as part of the bid, and (3) if the City Attorney’s Office http://www.bidnetdirect.com/colorado determines the data meets the requirements of the CORA. The City’s Access to Public Records Policy, which includes policies about release of solicitation records, can be found on the City’s Central Records web page under the heading Additional Resources.

Preference. Preference is given to labor, materials, supplies, or provisions produced, manufactured, or grown in the state of Colorado, quality and price being equal to articles or services offered by competitors outside of Colorado.

Digital Accessibility. If the work or services described herein include information technology or digital content that must be made “accessible,” the successful bidder must agree, if requested by the City, to undertake such reasonable efforts that may be needed of the successful bidder to adapt and convert work product to ensure it is accessible within the meaning of §§ 24-85-101, et seq., C.R.S., and its implementing regulations. For contracts which the provision of information technology comprises a primary or material component of the service (such as software and web services) the City anticipates requiring that the successful bidder agrees to ensure legal compliance, subject to limited exceptions.

Socially Responsible Procurement. The City is committed to socially responsible procurement and promoting social equity through its contracts. The City works to ensure open and fair procurements, competitive and fair pricing, environmentally sustainable solutions, and encourage members of the underserved business community to participate in our competitive solicitations.

Attention is called to the fact that not less than the minimum salaries and wages as set forth in the Contract Documents must be paid on this project, and that the Contractor must ensure that employees and applicants for employment are not discriminated against because of their race, color, religion, sex, or national origin (Davis Bacon Wages). If the bidder anticipates hiring employees to work on this job, the bidder should contact the local manpower office for qualified candidates.

Equal Opportunity. The City does not discriminate on the grounds of race, creed, ancestry, religion, religious expression, color, sexual orientation, gender identity, gender expression, genetic characteristics, marital status, age, sex, mental or physical disability, or national origin in consideration of an award.

Disadvantaged business enterprises are afforded a full opportunity to submit proposals.

City’s Reserved Rights. For avoidance of doubt, the City reserves the following rights:

• Right to Supplement or Modify. At any time prior to award, the City reserves the right to supplement or modify its solicitation with additional or different information, questions, contract language, or any other materials the City deems prudent to include in the supplementation or modification. Such supplementation or modification includes the right to modify the bid schedule at any time.

Supplementation or modification will likely occur through Bidnet but may occur by email contact to bidders if the deadline has passed.

• Right to Reject. The City reserves the right to reject any bid that fails to meet the requirements described herein, the requirements or criteria in the City’s Purchasing Ordinance, or in the City’s Purchasing Policy Manual, as such ordinance or policy manual may be amended from time to time, or any other pertinent standard or criteria established by City. The City reserves the right to require new bids or reject any bid if the City believes it would not be in the best interest of the project or services set forth in this RFB to make an award to a given bidder. This right to reject includes the right to reject any bidder who appears on one or more lists designating the bidder as a debarred or suspended entity or individual for other public https://bouldercolorado.gov/services/central-records https://library.municode.com/co/boulder/codes/municipal_code?nodeId=TIT2GOOR_CH8PUPR procurements.

• Right to Waive Irregularities. The City may waive, or decline to waive, any informality or irregularity contained in any bid.

• Right to Revoke or Cancel Award. At any time prior to the successful bidder and the City entering into a written and signed contract, the City reserves the right to revoke or cancel the award. If, for any reason, the City and a successful bidder are unable to come to terms of agreement, the City may, in its sole discretion, either award to the next highest scoring bidder or cancel this solicitation.

• Right to Negotiate Changes in Scope or Services. The City may negotiate changes to the services or work offered by the successful bidder as part of the final contracting process.

• Right to Make Partial Award. The City may award the contract by sections or in portions and reserves the right to adopt all or part of a bid.

Verbal Communications. Any verbal communications bidders may receive about this solicitation are non-binding upon the City. Vendors should rely only upon written statements issued by the authorized City representatives listed in the Instructions to Bidders and Bid Schedule section of this RFB or a member of the City’s Purchasing Division.

Unauthorized Contacts. A bidder’s unauthorized contacts with City staff about this solicitation may result in disqualification of the bidder.

Contract Terms. All awards are subject to the awarded bidder and the City successfully negotiating and entering into a written and signed contract in a form approved by the City Attorney’s Office. The City’s award to a successful bidder does not constitute consent by the City to (1) any revised terms or conditions contained in exceptions, or (2) any terms or conditions contained in the bid of the successful bidder.

In some instances, contract terms are resolved by appending this solicitation and the successful bid to the contract template attached hereto. This is common for the City’s construction and public works contracts.

However, most contracts necessitate development of a scope of work that further refines and clarifies the services. Bid language may merit modification to contract terms, even where a bidder has not made exceptions. While the City’s position is that, generally, failure to make exceptions results in a waiver of the ability to later claim those exceptions, the City reserves the right to modify the contract as the City and the successful bidder deem appropriate.

In the event of any conflict between this RFB and the contract entered into by and between the City and the successful bidder, the terms and conditions of the contract shall control.

Bidder’s Right to Withdraw. In the event the selected bidder and the City are unable to come to an agreement on final terms for the contract, and provided such inability is due to either (1) the bidder’s exceptions or the City’s required changes in response thereto, or (2) the City’s required revisions to the version of the contract posted with this solicitation (as modified by an addendum), the selected bidder shall have the right to withdraw its bid without penalty or loss of any bid bond required by this solicitation.

Waiver. All bidders agree that damage or claim shall not be brought by any bidder because of rejections, and the bidders shall not seek any recourse of any kind against the City because of such rejections. The filing of any bid in response to this RFB shall constitute a binding agreement of the bidder to these

Federal, State, or Other Third-Party Approval. Bidders should be aware that some awards may require approval (or non-objection) by one or more third parties. Common examples of this include projects that use state or federal funding and for which, accordingly, state or federal agencies must approve the award (e.g., CDOT approval required for certain transportation projects). The City specifically reserves the right to revoke awards if a state, federal, or other entity providing financing or with oversight rights/responsibilities will not approve of or object to the award, or if the selected bidder is not otherwise fully authorized to perform the services under such state, federal, or third-party entity.

Dated this September 12, 2025.

City of Boulder, Colorado A Municipal Corporation

INSTRUCTIONS FOR BIDDERS AND BID SCHEDULE

1. Bidders responding to this RFB must submit their bids as specified in this solicitation.

2. One electronic copy of the bid must be submitted online through the Rocky Mountain E-Purchasing System (www.bidnetdirect.com/colorado) and must be addressed to the Project Manager listed below. Bidders are strongly encouraged to familiarize themselves with the Bidnet website in advance of the proposal deadline.

3. Bids must be dated and signed by a duly authorized partner or corporate officer, with that person’s name and title clearly identified. All bid terms, conditions, contents, fees, and charges shall be guaranteed by the bidder for a minimum of forty-five (45) days from the submission deadline. The City may, in its sole discretion, release any bid and return the bid bond prior to the end of such guarantee period.

4. Bidders who have questions concerning the scope of work or services or other requirements set forth in this RFB shall contact the following City representative:

Project Manager Brian Walton Water Resources Senior Program Manager City of Boulder Open Space & Mountain Parks Phone: 720-417-4976 Email: waltonb@bouldercolorado.gov

5. The above referenced individual is the only representative of the City with authority to provide any information, clarification, or interpretation regarding the plans, specifications, and any other contract documents or requirements. Contact with any other employee of the City of Boulder regarding this project is not authorized. Any information obtained from those other than an authorized City representative shall be considered invalid in the preparation of a proposal for this project.

6. Bidders who request clarification of the solicitation’s requirements may submit written questions to the project manager at the email address listed above by 5:00 PM (Mountain Time) on September 24th, 2025.

All questions and answers will be posted as an addendum on Bidnet. Bidders should rely only on written statements issued by the project manager.

7. Before submitting a bid, each bidder shall:

• Examine the contract documents thoroughly.

• Become familiar with federal, state, and local laws, ordinances, rules, and regulations that may in any manner affect cost, progress, or performance of the work.

• Study and carefully correlate the bidder’s observations with the contract documents.

• Notify the project manager of all conflicts, errors, omissions, ambiguities, or discrepancies in or among the contract documents.

8. All bids timely submitted shall become the property of the City and shall be retained in accordance with the City’s records retention schedule. The City is a Colorado governmental entity and therefore, all information included in proposals and other written information submitted by the bidder to the City is subject to the http://www.bidnetdirect.com/colorado provisions of the CORA. Bidders should expect that their proposal may be viewed by the general public and competitors once submitted to the City, subject to the City’s Access to Public Records Policy. Merely marking information as “confidential,” “proprietary,” or otherwise stating a written intent to protect the information from disclosure is not necessarily sufficient to prevent disclosure under CORA.

9. Bid Schedule (all times Mountain Time) RFB Issued September 12th, 2025 Non-Mandatory Prebid Meeting September 23rd, 2025 9:00 a.m.

Written Questions due September 24th, 2025 at 5:00 pm Responses to Written Questions Posted September 25th, 2025 Bids Due October 3rd, at 4:00 pm Review of Bids October 6, 2025 Successful Bidder Selected* October 9, 2025 (estimate)

*Pursuant to Section 2-8-4(a)(3) of the Boulder Revised Code 1981, the successful bidder is required to sign a contract with the City within 15 days of the successful bidder’s acceptance of the award by the City.

Failure to do so will result in the bidder’s forfeiture of its bid bond.

Interview – Optional. The City may elect to conduct interviews with one or more bidders. The City may do so to better understand the bidders, their teams, their approaches, products, and solutions, and any other information relevant to the work or project described in this solicitation. In some instances, the City may request that the interviews include a presentation by the interviewed bidders. In these instances, bidders may prepare PowerPoint or other written material that may assist the City in understanding and evaluating their bid. Bidders cannot plan on having an interview and, accordingly, are strongly encouraged to include all information necessary for the City’s evaluation in their bid documents. For the avoidance of doubt, the City reserves the right to include information provided by bidders during interviews in the contract documents.

10. Prebid Meeting – Optional.

Bidders are responsible for ensuring their attendance is documented, including by signing any provided sign-in sheet or otherwise checking in for online meetings so that City representatives understand bidder’s representative is in attendance. This may require provision of company name, attendee name, and contact information.

There will be an optional prebid meeting at 9am on September 23rd. Attendance is not mandatory, but recommended if you have not been on site before. N 35th Street Boulder, CO https://maps.app.goo.gl/GTs9Y8Ngf8SPCJJy6 - Please park behind residence adjacent to garage or barn.

11. Required Documents for Bid Submission.

To be considered, all bids shall include the following completed forms:

• City of Boulder Bid Proposal. Please include the separate excel spreadsheet with your submission.

• City of Boulder Bid Bond in the amount of 5% of the total bid (form attached).

• City of Boulder Bid Form (attached).

• City of Boulder Acceptance of Terms and Conditions (attached).

In addition, the City requests submittal of the following documents at the time of bid submission, and the City will require such documents be completed and submitted in acceptable form to the City prior to contracting:

https://documents.bouldercolorado.gov/WebLink/DocView.aspx?id=185061&dbid=0&repo=LF8PROD2&_ga=2.103231561.839680403.1721847125-955511549.1682975816&cr=1

• City of Boulder Non-Collusion Certificate (attached).

• City of Boulder Contractor Qualification Form (attached).

• City of Boulder Schedule of Manufacturers and Suppliers (attached).

• City of Boulder Schedule of Proposed Subcontractors (attached).

• Certificate of Good Standing from the Colorado Secretary of State. If your company is not registered with the Colorado Secretary of State, include a statement addressing why it is not required to register or affirming that, prior to entering into a contract with the City, your company will register with the Colorado Secretary of State if the City awards your company the contract.

In addition to the forms attached to this RFB, all above-listed documents, except the Bid Proposal and Certificate of Good Standing, have been included as a separate PDF file in the Bidnet documents section labeled Required Bid Documents. You will also find the Microsoft Excel spreadsheet for pricing in the same documents section in Bidnet. The spreadsheet is labeled 48-2025 Crocker Ditch Measurement & Splitter Structure Replacement.

For avoidance of doubt, the City reserves the right to request that bidders correct minor irregularities or issues in the forms submitted, though bidders should not expect to have the opportunity to correct such irregularities or issues. With respect to the City’s contracting terms and conditions, the City reserves the right to negotiate additional or different changes to contract language that the City deems necessary or prudent to account for bidder exceptions.

EVALUATION CRITERIA

The award will be provided to the lowest bid, submitted by a responsible and qualified bidder. Bids the City determines fail to respond to a material component of this Solicitation may be rejected. The lowest bid will include consideration of initial cost and, if applicable, life-cycle cost, including, without limitation, maintenance cost, over the normal lifetime of the product and energy-efficiency in consumption of non-renewal fuels (if applicable). Bidders are only responsible and qualified if the City is satisfied it meets the below responsibility criteria:

• The bidder’s integrity and financial responsibility.

• The bidder’s skill, relevant technical expertise, and ability to complete the contract promptly and satisfactorily.

• Whether the bidder maintains a permanent place of business.

• Whether the bidder has adequate plant, equipment, and support services to perform the contract.

• Whether the bidder has previously performed similar work satisfactorily.

• Whether the bidder is likely to be engaged in work that may impair the ability to finance the work covered by the bid or provide equipment for its proper execution.

• Whether the bidder proposes a reasonable approach to achieve the objectives sought.

• Whether there have been or are any claims that raise a substantial question about the bidder’s ability to perform the contract.

The City applies the above criteria liberally, and may eliminate bidders based upon one or more of these criteria. Bidders must propose high-quality approaches, competitive and reasonable pricing, and provide adequate certainty surrounding the project or risk elimination from consideration. The City may conduct such investigations as the City deems necessary to assist in the evaluation of any bid and to establish the responsibility, qualifications, and financial ability of any bidder or their proposed subcontractors and other persons and organizations to do the work in accordance with the contract to City’s satisfaction.

Further, the City may consider the qualifications and experience of subcontractors, suppliers, and other persons and organizations proposed for those portions of the work as to which the identity of subcontractors, suppliers, and other persons and organizations must be submitted. The City also may consider the operating costs, maintenance requirements, performance data and guarantees of major items of materials and equipment proposed for incorporation in the work when such data is required to be submitted prior to the contract award.

ALL AWARDS ARE SUBJECT TO CONTRACT EXECUTION. If for any reason, the negotiations with the apparent lowest bidder who satisfies all applicable requirements are unsuccessful, the City may terminate those negotiations and begin negotiations with a different bidder, or cancel and repost the solicitation in order to contract with the bidder that best meets the needs of the City.

BID BOND

Note: Complete and return this form with your bid.

RFB Title: Crocker Ditch Measurement & Splitter Structure Replacement

RFB Number: 48-2025

Witness:

, as principal, hereinafter called the “bidding contractor,” and , as “surety,” a corporation properly organized under the laws of Colorado or authorized to do business in Colorado, hereby obligate themselves to the City of Boulder, as obligee, hereinafter called the “City,” in the penal sum of dollars ($ ), which penal sum shall secure the obligation of the bidding contractor to enter into contract with the City for the work associated with

Project Number , if the bidding contractor is so selected by the City.

If the City accepts the bid of the bidding contractor, and if the bidding contractor properly executes a contract with the City to perform the work covered by the award, then this obligation shall be null and void.

In the alternative, if the bidding contractor refuses to enter into contract with the City for work described in the bid, but rather pays to the city the difference between the bidding contractor’s stated bid amount and the actual amount bid by an alternate bidding contractor, who is accepted by the City, then this obligation shall be null and void.

EXECUTED on this day of , 20 .

(Contractor)

By:

(President)

(Surety Company)

By:

(Attorney-in-Fact)

BID FORM

RFB Number:48-2025

The undersigned bidder does hereby declare and stipulate that the Bid Proposal is made in good faith, without collusion or connection with any other person or persons bidding for the same work, and that it is made in pursuance or and subject to all the terms and conditions of the bid documents all of which have been examined by the undersigned.

Bidders shall submit prices as provided in the Bid Proposal. Should an error occur in the extension of price, the unit price shall govern.

The City of Boulder (“City”) reserves the right to make the award on the basis of the bid deemed most favorable to the City, to waive any informalities or to reject any or all bids.

The bidder shall complete the attached Contractor Qualification Form, with the bid proposal.

Failure to provide this information may be sufficient cause for rejection of the bid.

The bidder shall complete the attached Proposed Subcontractors Form, with the bid proposal.

Failure to provide this information may be sufficient cause for rejection of the bid.

The bidder shall complete the attached Schedule of Manufacturers and Suppliers Form, with the bid proposal. Failure to provide this information may be sufficient cause for rejection of the bid.

Addendum No.(s) have been received.

Attached is an unconditional letter of credit, money order, certified check, or bid bond payable to the City of Boulder in an amount not less than five percent (5%) of the total amount of the bid.

If this bid is accepted, the bidder agrees to sign the contract agreement without qualifications and to furnish the performance bond, labor and material bond and the required evidence of insurance within ten (10) calendar days after notification of award.

All proposals shall be submitted on the bid proposal. The lowest responsible bid will be accepted;

provided, however, that the City shall have the right to reject any or all bids and to waive any informalities or irregularities contained in said bid. The quantities are an estimate only and may be altered to meet actual City requirements.

Submit firm unit prices for the type of construction listed. Overhead shall not be priced and bid separately but shall be included in each bid item as required. All prices are for furnishing and installing the described item.

The bidder proposes to perform all work and provide all labor, materials, and equipment in full accordance with the bidding documents.

Confidential data, if identified as such, will be held confidential upon request, if the request is made as part of the bid and the City Attorney’s Office determines the data meets the minimum requirements of the Colorado Public Records Act.

ATTEST:

Corporation

President Date Address City State Zip Code Phone number

Email

ATTEST: Company Name

Company Partner

Address City State Zip Code

ATTEST:

Individual

Company Name

Address City State Zip Code

Tax Identification Number

It is imperative that the Business and/or vendor name (surname for an individual) and TIN number combination (Employer Identification Number for a Business or Social Security Number for an individual) match exactly.

ACCEPTANCE OF TERMS AND CONDITIONS

The undersigned, as an authorized agent of the bidder, hereby certifies that the bidder:

1. Has received addendums;

2. Is familiar with all instructions, terms and conditions, and specifications stated in this RFB;

3. Is qualified to perform the work and services outlined in this RFB; and

4. Has reviewed the form of agreement attached to this RFB.

Each bidder must indicate exceptions that it takes to any terms and conditions listed in the form of agreement attached to this RFB, as well as the RFB itself. The City reserves the right to not consider exceptions that are not identified on this form. Proposals which take exception to the specifications, terms, or conditions of this RFB or offer substitutions shall explicitly state the exception(s), reasons(s) therefore, and language substitute(s) (if any) in this section of the proposal response. Failure to take exception(s) shall mean that the bidder accepts the conditions, terms, and specifications of the RFB, including the attached form of agreement.

Check the appropriate box below and complete this section as applicable:

☐ Bidder takes no exception to the specifications, terms, and conditions of this RFB.

☐ Bidder takes exception to the following terms and conditions in this RFB:

Signed:

By: ______________________________________

Title: _____________________________________

Date: _____________________________________

For: ________________________________________________________

NON-COLLUSION CERTIFICATE

Note: Return this page with your bid.

RFB Number:48-2025

The undersigned, being duly sworn, deposes and says that the person, firm, association, partnership or corporation herein named, has not, either directly or indirectly, entered into any agreement, participated in any collusion, or otherwise taken any action in restraint of free competitive bidding in the preparation and submission of a proposal to the City of Boulder for consideration in the award of the project described in this solicitation.

(Firm Name)

By: ______________________________________ (Authorized Signature)

Printed Name: ___________________________

Title: ________________________________

Email: _______________________________

CONTRACTOR QUALIFICATION FORM

I. General Information

Your Company:

Name:

Address:

How long have you been in business?

How long have you been in business under the present business name? __________________

What former name(s), if any, has your company operated under in the past five (5) years?

What is the largest contract you have been awarded in the past twelve (12) months?

II. Information: Previous Construction Contract

Provide the following information for three (3) contracts you have performed, or are currently performing, within the past five (5) years. At least two (2) contracts must be completed. If you have performed any contract with the City of Boulder, or County of Boulder, or state of Colorado, include information about at least one (1) such contract.

Contract 1

Owner

Name

Address Phone

Date Begun Date Completed Dollar Amount

Description of Work

Architect

Surety for Performance Bond: ___________

Surety for Labor and Material Bond:

Insurance Company:

Major Subcontractor:

Major Supplier:

Are there any lawsuits, claims, or disputes resulting from this project? If so, please describe:

Contract 2

Surety for Performance Bond:

Are there any lawsuits, claims, or disputes resulting from this project? If so, please describe:

Contract 3

Surety for Performance Bond:

Are there any lawsuits, claims, or disputes resulting from this project? If so, please describe:

III. Describe the work you normally perform with your own forces:

IV. Have you, or any officer or partner of your organization, when working for another organization, failed to complete any work awarded to you or such officer or partner? If so, attach a separate sheet of explanation.

V. Are there any claims or law suits against your organization, against predecessor organizations of your organization, or against any officer or partner who currently works for your organization which have been brought during the previous five years? If so, attach a separate sheet of explanation.

VI. Resumes

Provide resumes for at least two (2) persons with your company. One resume should be for an officer of the company: president, vice-president, etc. The second resume should be for an operations manager of the company who has had experience directing a job as a contractor or superintendent. An operations manager may also be an officer of the company.

Officer:

Operations Manager:

VII. Trade References:

1.

2.

3.

4.

5.

VIII. Bank References:

1.

2.

3.

4.

5.

IX. Name of Bonding Company and name and address of agent:

X. Attach a financial statement, audited if available, (consolidated if the contractor is part of an affiliated group), including contractor's latest balance sheet and income statement showing the following items:

A. Current Assets (e.g., cash, joint venture accounts, accounts receivable, notes receivable, accrued income, deposits, materials inventory, and prepaid expenses):

B. Net Fixed Assets:

C. Other Assets:

D. Current Liabilities (e.g., accounts payable, notes payable, accrued expenses, provision for income taxes, advances, accrued salaries, and accrued payroll taxes):

E. Other Liabilities (e.g., capital, capital stock, authorized and outstanding shares par values, earned surplus, and retained earnings):

Name of firm preparing financial statement and date thereof:

Is this financial statement for the identical organization named in Part I on page one?

If not, explain the relationship and financial responsibility of the organization whose financial statement is provided (e.g., parent-subsidiary).

Will this organization act as guarantor of the contract for construction?

SCHEDULE OF MANUFACTURERS AND SUPPLIERS

Note: The City reserves the right to reject the use of any particular manufacturer.

Name Phone No.

City State Zip Code

Name Phone No.

PROPOSED SUBCONTRACTORS

Note: The City reserves the right to reject the use of any particular subcontractor.

Name Phone No.

PROJECT INFORMATION, SPECIFICATIONS, DRAWINGS

Crocker Ditch Measurement & Splitter Structure Replacement

MEMO: Design Field Fit Bid Notes

Interested contractors, thank you for considering the OSMP Crocker Ditch Measurement & Splitter Structure Replacement project. This document should be used in conjunction with the attached ‘Bid Tab’ and ‘Summit Engineering Design.’ OSMP staff have made field fit decisions to reduce material amounts and improve project implementation efficiency. Revised material amounts are reflected in the ‘Bid Tab.’ If not noted in this document, all other specifications are to remain as designed and as called out in the ‘Summit Engineering Design.’

• Wall Width o Designed – 10’’ o Field Fit – Reduce to 8’’

• Toe Wall o Designed – 2’ o Field Fit – Reduce to 1’

• Slab Depth o Designed – 12’’ o Field Fit – Reduce to 10’’

• Subgrade Preparation o Designed - 1’ Class 6 Road Base o Field Fit – Reduce to 4’’

• Subgrade Preparation o Designed – Excavate Moisture Condition and Recompact Soil Beneath o Field Fit – Excavate and Smooth to Grade

• Grout o Designed – SIKA Grout o Field Fit – Standard available grout, minimum 4,500 PSI

• Culvert and Flared Ends o Designed – 24’’ HDPE, 24’’ Flared Ends o Field Fit – Culvert Installation Removed from Design, Extend Earthen Ditch Grading, Match

Existing Downstream Ditch Tie in Location

City of Boulder Open Space and Mountain Parks 2520 55th Street | Boulder, Colorado 80301 | 303-441-3440 htt // http://www.osmp.org/

No. Description Date By Revisions

CHECKED BY:

DRAWN BY:

DESIGNED BY:

JOB NUMBER:

DATE:

APPROVED BY:

BAR IS ONE INCH ON ORIGINAL DRAWING

SHEET SIZE: 22"x34"

SCALE VERIFICATION

OF

SUMMIT

WATER ENGINEER S INC

0" 1"

CROCKER DITCH MEASUREMENT & SPLITTER STRUCTURE REPLACEMENT

CITY OF BOULDER - OPEN SPACE & MOUNTAIN PARKS

COVER & VICINITY MAP

BBE

BDC

RCC

0176.003.00

06-06-25 RCCISSUED FOR BID1

G1

STATE OF COLORADO

PROJECT LOCATION MAP

SCALE: NONE

PROJECT SITE

STERLING

FT. MORGAN

GREELEY

FT. COLLINS

LOVELAND

LONGMONT

BOULDER

DENVER

COLORADO SPRINGS

TRINIDAD

ALAMOSA

CANON CITY

LAMAR

PUEBLO

STEAMBOAT SPRINGS

MONTROSE

GLENWOOD

SPRINGS

DURANGO

LA JUNTA

GUNNISON

COLORADO

ARKANSAS RIVER

RIV

ER

RIVER

SO

UT

H

PLA

TTE

90% ISSUED FOR BID

PREPARED FOR:

2520 55th STREET

BOULDER, CO 80301

PREPARED BY :

SUMMIT WATER ENGINEERS, INC.

NOT FOR CONSTRUCTION

WATER DIVISION 1, WATER DISTRICT 5

PORTION OF SW 14 OF SECTION 19, T2N, R70W, 6TH P.M.

BOULDER COUNTY, COLORADO

CITY OF BOULDER - OPEN SPACE & MOUNTAIN PARKS

CROCKER DITCH MEASUREMENT & SPLITTER STRUCTURE REPLACEMENT

CITY OF BOULDER - OPEN SPACE &

MOUNTAIN PARKS

N

5t h

St

PLATEAU RD

NOTES:

1. SUMMIT WATER ENGINEERS, INC. IS NOT A GUARANTOR OF THE

PERFORMANCE OF THE WORK.

2. SUMMIT WATER ENGINEERS, INC. IS NOT RESPONSIBLE FOR SAFETY,

IN, ON, OR ABOUT THE PROJECT SITE, NOR FOR COMPLIANCE BY THE

APPROPRIATE PARTY WITH ANY REGULATIONS RELATED THERETO.

3. SUMMIT WATER ENGINEERS, INC. EXERCISES NO CONTROL OVER THE

SAFETY OR ADEQUACY OF ANY EQUIPMENT, BUILDING COMPONENTS,

FORMS, OR OTHER WORK AIDS USED IN OR ABOUT THE PROJECT, OR

OVER THE SUPERINTENDING OF THE SAME.

SUMMIT WATER ENGINEERS, INC. ASSUMES NO RESPONSIBILITY

FOR EXISTING UTILITY LOCATIONS (HORIZONTAL AND VERTICAL).

THE EXISTING UTILITIES SHOWN ON THIS DRAWING HAVE BEEN

PLOTTED FROM THE BEST AVAILABLE INFORMATION. IT IS,

HOWEVER, THE RESPONSIBILITY OF THE CONTRACTOR TO FIELD

VERIFY THE LOCATION OF ALL UTILITIES PRIOR TO THE

COMMENCEMENT OF ANY CONSTRUCTION ACTIVITIES.

R

Know what's below.

Call before you dig.

CALL 2-BUSINESS DAYS IN ADVANCE BEFORE YOU

DIG, GRADE, OR EXCAVATE FOR THE MARKING OF

UNDERGROUND MEMBER UTILITIES.

SCALE IN FEET

4000 2000 0

VICINITY MAP

ISSUED FOR BID

Sheet List Table Sheet Number Sheet Title

G1 Cover & Vicinity Map G2 Construction Access G3 Existing Condition & Demolition Plan C1 Crocker Ditch Plan & Profile C2 Crocker Ditch Lateral Plan & Profile C3 Grading Plan C4 Structure Details C5 Structure Details C6 Details

AutoCAD SHX Text Friday, June 6, 2025 10:39:59 AM DRAWING: C:\summit water eng dropbox\project files\0176 boulder osmp\003 crocker\CAD\Working\0176.003 - Cover & Vicinity Map.DWG

AutoCAD SHX Text

NOT FOR CONSTRUCTION

No. Description Date By Revisions

CHECKED BY:

DRAWN BY:

DESIGNED BY:

JOB NUMBER:

DATE:

APPROVED BY:

BAR IS ONE INCH ON ORIGINAL DRAWING

SHEET SIZE: 22"x34"

SCALE VERIFICATION

OF

SUMMIT

WATER ENGINEER S INC

0" 1"

CROCKER DITCH MEASUREMENT & SPLITTER STRUCTURE REPLACEMENT

CITY OF BOULDER - OPEN SPACE & MOUNTAIN PARKS

CONSTRUCTION ACCESS

BBE

BDC

RCC

0176.003.00

06-06-25 RCCISSUED FOR BID1

G2

SCALE IN FEET

300150

N F

O O

TH

IL

LS

H

W Y

LEFT HAND CREEK

CROCKER DITCH

FLO

W

FLOW

SPLITTER STRUCTURE

CRO

CKER DITCH

FLOW

CONSTRUCTION ACCESS

OWNER:

SUTHERLAND RONALD G

OWNER:

SUTHERLAND RONALD G

OWNER:

LEFTHAND CREEK

HOLDINGS LLC

OWNER:

JORDAN VIRGINIA W

OWNER:

BELL PARK LLC

OWNER:

HESTER PLACE LLC

OWNER:

HUDAK DAVID J &

ELIZABETH A COLEMAN

OWNER:

CITY OF BOULDER

OWNER:

CITY OF

BOULDER

OWNER:

AUERNHAMER

ROGER ERNST

& PATRICIA A

FLO

W

LATER

AL

DRAFT

AutoCAD SHX Text Friday, June 6, 2025 10:40:08 AM DRAWING: C:\summit water eng dropbox\project files\0176 boulder osmp\003 crocker\CAD\Working\0176.003 - Erosion Control.DWG

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

LEGEND

EXISTING CONTOUR

EXISTING CONTOUR INDEX

OVERHEAD UTILITY

FENCE

BENCHMARK

CONTROL POINT

POWER POLE

CONIFEROUS TREE

DECIDUOUS TREE

SPOT ELEVATIONSEXISTING UNDERGROUND ELECTRIC

PROPOSED ALIGNMENT4+00

PROPERTY LINE

PROPOSED CONTOUR

PRPOSED CONTOUR INDEX

4957.17

STREAM LINE

A

SECTION

DETAIL Title

SECTION LETTER/DETAIL NUMBER

DRAWING ON WHICH

SECTION/DETAIL IS

SHOWN

DRAWING ON WHICH

SECTION/DETAIL IS

CUT/CALLED-OUT

RIGHT OF WAY (ROW)

EXISTING EASEMENT

SECTION LINE

No. Description Date By Revisions

CHECKED BY:

DRAWN BY:

DESIGNED BY:

JOB NUMBER:

DATE:

APPROVED BY:

BAR IS ONE INCH ON ORIGINAL DRAWING

SHEET SIZE: 22"x34"

SCALE VERIFICATION

OF

SUMMIT

WATER ENGINEER S INC

0" 1"

CROCKER DITCH MEASUREMENT & SPLITTER STRUCTURE REPLACEMENT

CITY OF BOULDER - OPEN SPACE & MOUNTAIN PARKS

EXISTING CONDITION & DEMOLITION PLAN

BBE

BDC

RCC

0176.003.00

06-06-25 RCCISSUED FOR BID1

G3

5 0 10

SCALE IN FEET

PLAN VIEW

EXISTING VEGETATION BOUNDARY

DRAFT

OWNER:

SUTHERLAND RONALD G

OWNER:

BELL PARK LLC

CROCKER DITCH FLOW

CROCKER DITCH FLOW

DITCH LATERAL

FLOW

EXISTING EASEMENT

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text Friday, June 6, 2025 10:40:16 AM DRAWING: C:\summit water eng dropbox\project files\0176 boulder osmp\003 crocker\CAD\Working\0176.003 - Existing Condition & Demolition Plan.DWG

AutoCAD SHX Text

NOT FOR CONSTRUCTION

AutoCAD SHX Text

PROPERTY LINE

AutoCAD SHX Text

EXISTING 18" CMP (TO BE REMOVED)

EXISTING FENCE (TO BE PRESERVED OR REPLACED IN KIND)

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

X

XX

X X

X

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

0+00

0+20 0+40

0+60

0+

1+00

1+20

1+40

1+60

1+77

5503.5

5504.5

5504.5

5501.5

5501.5

5502.5

5502.5

5503.5

5504.5

5502.5

5502.5

5503.5

5503.55503.5

.5

55035503.555045504.55505

5501.5

5503.5

5503.5

EL

EV

AT

IO

N (F

T)

EL

EV

AT

IO

N (F

T)

STATION (FT)

0+00 0+20 0+40 0+60 0+80 1+00 1+20 1+40 1+60 1+80

-0.75%

PR

O

PO

SE

D

4" H

D

PE

F

ES

ST

A.

+2

6.

IN

V

EL

=5

1.

EL=5502.67

SL

AB

ST

A

0+

.2

IN

V

EL

=5

2.

PR

O

PO

SE

D

4" H

D

PE

F

ES

ST

A.

+5

4.

IN

V

EL

=5

1.

EN

D

C R

O C

KE

R

D

IT

C H

M

EA

SU

R

EM

EN

T

SP

LI

TT

ER

S

TR

U C

TU

R

E

ST

A.

+7 4.

EL

=5

2.

EL=5505.09

EL=5503.00

EL=5502.75

EXISTING 18" CPP

TO BE REMOVED AND

REPLACED WITH 24" HDPE

WITH FES ON BOTH ENDS

EX WEST BANK

(PROJECTED)

EX EAST BANK

(PROJECTED)

EXISTING INVERT ON

EXISTING DITCH

ALIGNMENT

(PROJECTED)

EXISTING INVERT ON

EXISTING DITCH

ALIGNMENT

(PROJECTED)

BE

G

IN

C

R O

C

KE

R D

IT

C

H M

EA

SU

R

EM

EN

T

SP

LI

TT

ER

S

TR

U

C

TU

R E

ST

A

0+

.4

IN

V

EL

=5

2.

12" PARSHALL (24" HEIGHT)

FLUME INSERT

20.0 LF

24" HDPE

@ 0.84%

DITCH GRADING

-0.86%

TI

E

IN

TO

E

XI

ST

IN

G D

IT

C

H

ST

A.

+7 4.

IN

V

EL

=5

1.

PROPOSED TOP OF

DITCH BANK

(PROJECTED)

PROPOSED TOP OF

DITCH BANK

(PROJECTED)

-0.95%

PLAN VIEW

No. Description Date By Revisions

CHECKED BY:

DRAWN BY:

DESIGNED BY:

JOB NUMBER:

DATE:

APPROVED BY:

BAR IS ONE INCH ON ORIGINAL DRAWING

SHEET SIZE: 22"x34"

SCALE VERIFICATION

OF

SUMMIT

WATER ENGINEER S INC

0" 1"

CROCKER DITCH MEASUREMENT & SPLITTER STRUCTURE REPLACEMENT

CITY OF BOULDER - OPEN SPACE & MOUNTAIN PARKS

CROCKER DITCH PLAN & PROFILE

BBE

BDC

RCC

0176.003.00

06-06-25 RCCISSUED FOR BID1

C1

10 0 20

SCALE IN FEET

10 0 20 HORIZONTAL SCALE (FT)

VERTICAL SCALE (FT) 0 5 10

SCALE IN FEET

PROFILE VIEW

12" PARSHALL FLUME

(24" HEIGHT) INSERT

(SEE DETAIL SHEET C4)

CONTINUE GRADING OF TYPICAL

DITCH SECTION NORTH UNTIL

TOP OF BANK, AT EL=5505.5,

TIES INTO EXISTING SURFACE

FLOW

EXISTING TREE

(TO BE REMOVED)

PROPOSED TYPE "L" RIP RAP

(SEE DETAIL SHEET C6)

DITCH LATERAL

CROCKER DITCH

FLOW

FLOW

DITCH LATERAL

CROCKER DITCH

C6

DRAFT

24" HDPE PIPE

24" HDPE FES

24" HDPE FES

CROCKER DITCH MEASUREMENT &

SPLITTER STRUCTURE

TIE PROPOSED DITCH

INTO EXISTING

TIE PROPOSED DITCH

INTO EXISTING

OWNER:

SUTHERLAND RONALD G

OWNER:

BELL PARK LLC

1' EXISTING CONTOUR INTERVALS

0.5' PROPOSED CONTOUR INTERVALS

AutoCAD SHX Text Friday, June 6, 2025 10:40:24 AM DRAWING: C:\summit water eng dropbox\project files\0176 boulder osmp\003 crocker\CAD\Working\0176.003 - Plan & Profile.DWG

AutoCAD SHX Text

EXISTING 18" CMP (TO BE REMOVED)

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

X

XX

X X

X

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

0+00

0+20 0+40 0+60

0+80

1+00

1+20

1+40

1+60 1+67

5503.5

5504.5

5504.5

5501.5

5501.5

5502.5

5502.5

5503.5

5504.5

5502.5

5502.5

5503.5

5503.55503.5

.5

55035503.555045504.55505

5501.5

5503.5

5503.5

EL

EV

AT

IO

N (F

T)

EL

EV

AT

IO

N (F

T)

STATION (FT)

0+00 0+20 0+40 0+60 0+80 1+00 1+20 1+40 1+60 1+67

-0.74%

-1.81%

EN

D

C R

O C

KE

R

D

IT

C H

M

EA

SU

R

EM

EN

T

SP

LI

TT

ER

S

TR

U C

TU

R

E

ST

A.

+7 4.

IN

V

EL

=5

2.

SL

AB

S

TA

+8

3.

IN

V

EL

=5

2.

ST

A

0+

.0

IN

V

EL

=5

2.

EL=5502.75

EL=5505.09

EL=5503.00

BE

G

IN

C

R O

C

KE

R D

IT

C

H M

EA

SU

R

EM

EN

T

SP

LI

TT

ER

S

TR

U

C

TU

R E

ST

A

0+

.3

IN

V

EL

=5

2.

TI

E

IN

TO

E

XI

ST

IN

G D

IT

C

H

ST

A.

+4 5.

EL

=5

1.

EXISTING INVERT ON

EXISTING DITCH

ALIGNMENT

(PROJECTED)

EX WEST BANK

(PROJECTED)

EX EAST BANK

(PROJECTED)

EXISTING INVERT ON

EXISTING DITCH ALIGNMENT

(PROJECTED)

12" PARSHALL (24" HEIGHT)

FLUME INSERT

PROPOSED TOP OF

DITCH BANK

(PROJECTED) PROPOSED TOP OF

DITCH BANK

(PROJECTED)

PLAN VIEW

No. Description Date By Revisions

CHECKED BY:

DRAWN BY:

DESIGNED BY:

JOB NUMBER:

DATE:

APPROVED BY:

BAR IS ONE INCH ON ORIGINAL DRAWING

SHEET SIZE: 22"x34"

SCALE VERIFICATION

OF

SUMMIT

WATER ENGINEER S INC

0" 1"

CROCKER DITCH MEASUREMENT & SPLITTER STRUCTURE REPLACEMENT

CITY OF BOULDER - OPEN SPACE & MOUNTAIN PARKS

CROCKER DITCH LATERAL PLAN & PROFILE

BBE

BDC

RCC

0176.003.00

06-06-25 RCCISSUED FOR BID1

C2

10 0 20

SCALE IN FEET

10 0 20 HORIZONTAL SCALE (FT)

VERTICAL SCALE (FT) 0 5 10

SCALE IN FEET

PROFILE VIEW

DITCH LATERAL

CROCKER DITCH

12" PARSHALL FLUME (24" HEIGHT) INSERT

(SEE DETAIL SHEET C4)

DITCH LATERAL

CROCKER DITCH

FLOW

FLOW

FLOW

CONTINUE GRADING OF TYPICAL

DITCH SECTION NORTH UNTIL

TOP OF BANK, AT EL=5505.5,

TIES INTO EXISTING SURFACE

EXISTING TREE

(TO BE REMOVED)

PROPOSED TYPE "L" RIP RAP

(SEE DETAIL SHEET C6) 3

C6

DRAFT

24" HDPE PIPE

24" HDPE FES

24" HDPE FES

TIE PROPOSED DITCH

INTO EXISTING

TIE PROPOSED DITCH

INTO EXISTING

CROCKER DITCH MEASUREMENT &

SPLITTER STRUCTURE

OWNER:

SUTHERLAND RONALD G

OWNER:

BELL PARK LLC

1' EXISTING CONTOUR INTERVALS

0.5' PROPOSED CONTOUR INTERVALS

AutoCAD SHX Text Friday, June 6, 2025 10:40:27 AM DRAWING: C:\summit water eng dropbox\project files\0176 boulder osmp\003 crocker\CAD\Working\0176.003 - Plan & Profile.DWG

AutoCAD SHX Text

EXISTING 18" CMP (TO BE REMOVED)

3'

BENCHVARIES VARIES

DITCH BOTTOM

VARIES VARIES

3'

BENCH VARIES

EXISTING DITCH

2:1 (H:V)

PROPOSED SURFACE

2:1 (H:V)

VARIES

(4'-8" MIN.) EXISTING SURFACE

3:1 (H:V)

TOP OF BANK

EL=5505.00

3:1 (H:V)

TOP OF BANK

EL=5505.00

12"

12" MIN. CLAYEY SOILS

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X

5503.0

5503.0

5503.5

5503.5

5504.05504.0

5504.0

5504.0

5504.5

5504.5

5504.5

5504.5

5505.0

5505.0

5505.0

5505.0

.055

.5

5504.5

5505.0

0+00

0+40

0+

1+20

1+

1+77

.5

5502.0

5502.0

5502.0

5502.5

.5

5502.5

5503.0 5503.0

5503.0

5503.5

.5

.5

5503.5

.5

5502.0

5502.5

5503.0

5503.5

0+00

1+00

1+67

.5

5503.5

.0

.0

L7

L8

L9

L10

L1

L12

C3 C4

C5

C6

C7

L14

L15

L16

L17

L20

L21

L22

L23

L24

C8

C9

C10

C11

C14 C15

C16

C17

CURVE TABLE: ALIGNMENTS

CURVE # ARC LENGTH RADIUS CHORD BEARING CHORD LENGTH DELTA ANGLE

LINE TABLE: ALIGNMENTS

LINE # BEARING LENGTH START

NORTHING

START

EASTING

POINT TABLE

POINT #

NORTHING EASTING DESCRIPTION

No. Description Date By Revisions

CHECKED BY:

DRAWN BY:

DESIGNED BY:

JOB NUMBER:

DATE:

APPROVED BY:

BAR IS ONE INCH ON ORIGINAL DRAWING

SHEET SIZE: 22"x34"

SCALE VERIFICATION

OF

SUMMIT

WATER ENGINEER S INC

0" 1"

CROCKER DITCH MEASUREMENT & SPLITTER STRUCTURE REPLACEMENT

CITY OF BOULDER - OPEN SPACE & MOUNTAIN PARKS

GRADING PLAN

BBE

BDC

RCC

0176.003.00

06-06-25 RCCISSUED FOR BID1

C3

GRADING PLAN

5 0 10

SCALE IN FEET

TYPICAL DITCH SECTION

NORTH OF FLUME

0 3 6

SCALE IN FEET

TOP OF BANK

TOP OF BANK

CONTINUE GRADING OF TYPICAL

DITCH SECTION NORTH UNTIL

TOP OF BANK, AT EL=5505.5,

TIES INTO EXISTING SURFACE

DITCH LATERAL

CROCKER DITCH

12" PARSHALL FLUME

(24" HEIGHT) INSERT

(SEE DETAIL SHEET C4)

EXISTING TREE

(TO BE REMOVED)

PROPOSED TYPE "L" RIP RAP

(SEE DETAIL SHEETC6)

DITCH LATERAL

CROCKER DITCH

FLOW

FLOW

C6

PROPOSED TYPE "L" RIP RAP

(SEE DETAIL SHEETC6) 3

C6

DRAFT

3' DITCH

BOTTOM

3' DITCH

BOTTOM

3' DITCH

BOTTOM

3:1 (H :V)

2:

(H :V

2:1 (H:V)

3:

(H :V

3' MIN. BENCH

3' MIN. BENCH

3:

(H :V

3:1 (H:V)

3:

(H :V

3:1 (H:V)

24" HDPE PIPE

(6" MIN COVER OVER PIPE)

24" FES

24" FES

TIE PROPOSED DITCH INTO

EXISTING DITCH

TIE PROPOSED DITCH INTO

EXISTING DITCH

CROCKER DITCH MEASUREMENT &

SPLITTER STRUCTURE

5:1 (H:V)

6:1 (H:V)

1' EXISTING CONTOUR INTERVALS

0.5' PROPOSED CONTOUR INTERVALS

AutoCAD SHX Text C3

AutoCAD SHX Text C4

AutoCAD SHX Text C5

AutoCAD SHX Text C6

AutoCAD SHX Text C7

AutoCAD SHX Text C8

AutoCAD SHX Text C9

AutoCAD SHX Text C10

AutoCAD SHX Text C11

AutoCAD SHX Text C14

AutoCAD SHX Text C15

AutoCAD SHX Text C16

AutoCAD SHX Text C17

AutoCAD SHX Text 6.93

AutoCAD SHX Text 4.74

AutoCAD SHX Text 4.19

AutoCAD SHX Text 10.87

AutoCAD SHX Text 2.02

AutoCAD SHX Text 5.82

AutoCAD SHX Text 3.05

AutoCAD SHX Text 4.74

AutoCAD SHX Text 0.37

AutoCAD SHX Text 4.08

AutoCAD SHX Text 3.91

AutoCAD SHX Text 27.16

AutoCAD SHX Text 12.46

AutoCAD SHX Text 50.00

AutoCAD SHX Text 5.00

AutoCAD SHX Text 5.00

AutoCAD SHX Text 30.00

AutoCAD SHX Text 5.00

AutoCAD SHX Text 20.00

AutoCAD SHX Text 20.00

AutoCAD SHX Text 5.00

AutoCAD SHX Text 3.36

AutoCAD SHX Text 5.00

AutoCAD SHX Text 21.60

AutoCAD SHX Text 80.00

AutoCAD SHX Text 50.00

AutoCAD SHX Text S12°58'06"E

AutoCAD SHX Text S36°08'09"E

AutoCAD SHX Text S39°14'52"E

AutoCAD SHX Text S25°36'05"E

AutoCAD SHX Text S24°25'04"E

AutoCAD SHX Text S8°35'51"E

AutoCAD SHX Text S4°37'38"E

AutoCAD SHX Text S18°07'39"W

AutoCAD SHX Text S13°52'24"E

AutoCAD SHX Text S21°53'02"W

AutoCAD SHX Text S6°41'30"E

AutoCAD SHX Text S21°36'17"E

AutoCAD SHX Text S24°11'18"E

AutoCAD SHX Text 6.92

AutoCAD SHX Text 4.56

AutoCAD SHX Text 4.07

AutoCAD SHX Text 10.81

AutoCAD SHX Text 2.00

AutoCAD SHX Text 5.80

AutoCAD SHX Text 3.05

AutoCAD SHX Text 4.56

AutoCAD SHX Text 0.37

AutoCAD SHX Text 3.97

AutoCAD SHX Text 3.91

AutoCAD SHX Text 27.03

AutoCAD SHX Text 12.43

AutoCAD SHX Text 007°56'12"

AutoCAD SHX Text 054°16'17"

AutoCAD SHX Text 048°02'50"

AutoCAD SHX Text 020°45'17"

AutoCAD SHX Text 023°07'20"

AutoCAD SHX Text 016°40'43"

AutoCAD SHX Text 008°44'17"

AutoCAD SHX Text 054°17'09"

AutoCAD SHX Text 006°20'55"

AutoCAD SHX Text 046°46'23"

AutoCAD SHX Text 010°22'40"

AutoCAD SHX Text 019°26'55"

AutoCAD SHX Text 014°16'53"

AutoCAD SHX Text L7

AutoCAD SHX Text L8

AutoCAD SHX Text L9

AutoCAD SHX Text L10

AutoCAD SHX Text L11

AutoCAD SHX Text L12

AutoCAD SHX Text L14

AutoCAD SHX Text L15

AutoCAD SHX Text L16

AutoCAD SHX Text L17

AutoCAD SHX Text L20

AutoCAD SHX Text L21

AutoCAD SHX Text L22

AutoCAD SHX Text L23

AutoCAD SHX Text L24

AutoCAD SHX Text S16.561211E

AutoCAD SHX Text S63.161692E

AutoCAD SHX Text S15.132671E

AutoCAD SHX Text S09.000014E

AutoCAD SHX Text S35.584407E

AutoCAD SHX Text S12.512411E

AutoCAD SHX Text S00.152936E

AutoCAD SHX Text S08.594608E

AutoCAD SHX Text S09.005537E

AutoCAD SHX Text S10.415677E

AutoCAD SHX Text S45.161396W

AutoCAD SHX Text S01.300948E

AutoCAD SHX Text S11.524960E

AutoCAD SHX Text S31.194485E

AutoCAD SHX Text S17.025178E

AutoCAD SHX Text 9.58

AutoCAD SHX Text 1.33

AutoCAD SHX Text 30.90

AutoCAD SHX Text 59.90

AutoCAD SHX Text 42.14

AutoCAD SHX Text 3.97

AutoCAD SHX Text 19.25

AutoCAD SHX Text 29.47

AutoCAD SHX Text 8.93

AutoCAD SHX Text 13.12

AutoCAD SHX Text 3.78

AutoCAD SHX Text 1.12

AutoCAD SHX Text 5.60

AutoCAD SHX Text 6.03

AutoCAD SHX Text 7.67

AutoCAD SHX Text 1288167.116

AutoCAD SHX Text 1288088.360

AutoCAD SHX Text 1288084.611

AutoCAD SHX Text 1288151.203

AutoCAD SHX Text 1288045.049

AutoCAD SHX Text 1288009.122

AutoCAD SHX Text 1288151.697

AutoCAD SHX Text 1288129.413

AutoCAD SHX Text 1288100.303

AutoCAD SHX Text 1288021.012

AutoCAD SHX Text 1288087.146

AutoCAD SHX Text 1288080.800

AutoCAD SHX Text 1288075.803

AutoCAD SHX Text 1288045.196

AutoCAD SHX Text 1288028.704

AutoCAD SHX Text 3064232.758

AutoCAD SHX Text 3064249.163

AutoCAD SHX Text 3064252.923

AutoCAD SHX Text 3064237.103

AutoCAD SHX Text 3064265.707

AutoCAD SHX Text 3064291.293

AutoCAD SHX Text 3064236.574

AutoCAD SHX Text 3064236.907

AutoCAD SHX Text 3064241.515

AutoCAD SHX Text 3064259.483

AutoCAD SHX Text 3064241.495

AutoCAD SHX Text 3064237.328

AutoCAD SHX Text 3064237.812

AutoCAD SHX Text 3064248.916

AutoCAD SHX Text 3064257.146

AutoCAD SHX Text 1288167.1160

AutoCAD SHX Text 1288005.2520

AutoCAD SHX Text 1288157.4331

AutoCAD SHX Text 1288008.1245

AutoCAD SHX Text 3064232.7580

AutoCAD SHX Text 3064292.1760

AutoCAD SHX Text 3064235.7068

AutoCAD SHX Text 3064261.