R16PS01430_Salient_Characteristics.pdf

8, 10, and 12 Inch Gate and Check Valves

R16PS01430

Salient Characteristics Hoover Dam, NV

1 | P a g e

Item Quantity Twelve Inch Gate valve

Equivalent or better than:

The DHV Industries cast steel valve Part #: 12”-C12XF6-XX-X-GO

1. Size – 12 Inches

2. Material – Cast Steel

3. Type – OS & Y Gate with a Rising Stem

4. Pressure Rating – Class 300#

5. Valve body & bonnet materials = X special

(ASTM specs, service conditions, & standard trim):

E-1) The material type is 1.25% Chrome & .05% Moly.

E-2) A217 & WC6

E-3) This gate valve’s service conditions are: Non-corrosive, water, oil and gases between -25 degrees C & 595 degrees C.

E-4) API Trim No. 5 (#300 psi)

. 6. Trim materials must meet or exceed the ASTM specs and service conditions of:

Seat seal = HF Disc seal = 316 SS Stem material = F316

7. End connections = Raised Face/Flanged End.

8. The valve has a gear operator

9. Standard gland packing material = Die-formed graphoil with braided graphite yarn as top and bottom rings

10. Standard valve specifications:

Design: API-600 ANSI B16.34 Face to Face: ANSI B16.10 End to End: ANSI B16.10 End Flange: ANSI B16.5 B.W End: ANSI B16.25 Test & Inspection: API-598

11. Standard valve dimensions and weight:

Flanged End = 19.75 inches Weld End = 19.75 inches Height to open = 53.56 inches (approx) Hand wheel Diameter = 19.69 inches Turns to open = 52.00 Weight = 1278 pounds (approx)

PRICE:

Salient Characteristics Hoover Dam, NV

2 | P a g e

Item Quantity Twelve Inch Swing Check Valve

Equivalent or better than:

DHV Industries cast steel swing check valve Part #: 12”- C32XF6

1. Size – 12 Inches

2. Material – Cast Steel

3. Type – Swing Check

4. Pressure Rating – Class 300#

5. Valve body & bonnet materials = X special

(ASTM specs, service conditions, & standard trim):

E-1) The material type is 1.25% Chrome & .05% Moly.

E-2) ASTM Specification for 1.25% Chrome and .05% Moly is A217 & WC6

E-3) Service conditions for this valve are: Non-corrosive, water, oil and gases between -25 degrees C & 595 degrees C.

6. Trim material must meet or exceed the ASTM specifications and service conditions for:

Seat = HF Disc = 316SS Hinge pin = F316

8. Gate operator is not applicable

9. Packing material is not applicable

10. Standard valve specifications:

Design: BS 1868 API-594 Face to Face: ANSI B16.10 End to End: ANSI B16.10 End Flange: ANSI B16.5

RF Length = 28.00 inches Center to top Height = 21.73 inches RF Weight = 1145 pounds (approx)

Salient Characteristics

3 | P a g e

Item Quantity Eight Inch Gate Valve

Equivalent or better than:

the DHV Industries cast steel valve Part #: 8”-C12XF6-XX-X-GO

1. Size – 8 Inches

2. Material – Cast Steel

3. Type – OS & Y gate with a rising stem.

4. Pressure Rating – Class 300#

5. Valve body & bonnet materials = X special

(ASTM specs, service conditions, & standard trim):

E-1) The material type is 1.25% Chrome & .05% Moly.

E-2) ASTM Specification for 1.25% Chrome and .05% Moly is A217 & WC6

Seat = HF Disc = 316 SS

8. The valve has a gear operator

9. Standard gland packing material = Die-formed graph oil with braided graphite yarn as top and bottom rings

10. Standard valve specifications:

Design: API-600 ANSI B16.34 Face to Face: ANSI B16.10 End to End: ANSI B16.10 End Flange: ANSI B16.5 B.W End: ANSI B16.25

Flanged End = 16.50 inches Height to open = 39.76 inches (approx) Hand wheel Diameter = 17.72 inches Turns to open = 35.00 Weight = 507 pounds (approx)

Salient Characteristics Hoover Dam, NV

4 | P a g e

Item Quantity Ten Inch Swing Check Valve

Equivalent or better than:

DHV Industries cast steel swing check valve Part #: 10”- C32XF6

1. Size – 10 Inches

2. Material – Cast Steel

3. Type C = Swing Check

4. Pressure Rating – Class 300#

5. Valve body & bonnet materials = X special

(ASTM specs, service conditions, & standard trim):

E-1) The material type is 1.25% Chrome & .05% Moly.

E-2) ASTM Specification for 1.25% Chrome and .05% Moly is A217 & WC6

Seat = HF Disc = 316 SS

8. Gate operator is not applicable

9. Packing material is not applicable

10. Standard valve specifications:

Design: BS 1868 API-594 Face to Face: ANSI B16.10 End to End: ANSI B16.10 End Flange: ANSI B16.5

RF Length = 24.50 inches Center to top Height = 19.91 inches RF Weight = 656 pounds (approx)

Salient Characteristics

5 | P a g e

Total Quote (Including Freight)