PWS Attachment 1 - Pre Post Operational Checklist.pdf
PDF 157 KB Posted
- Attached to
- VESSEL LEASE (BAREBOAT) Federal contract opportunity
- Solicitation number
- H92240-22-T-0002
- Issued by
- United States Special Operations Command
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| PWS Attachment 2 - Underway Log.pdf | ||
| H92240-22-T-0002.pdf | ||
| Addenda 01 - Perf. Work Statement.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PWS, Attachment 1 1 of 6
Pre Operations Check List
Date: ________________ Engine Start Time: ___________ Generator Start Time: ___________
Vessel Type/ Name: ____________________________________________________
Hull Identification Number (HIN): _________________________________________
Starting Location: ______________________________________________________
Weather/ Sea Conditions: ________________________________________________
Boat Captain or Engineer Print / Sign: _______________________________________
*** If any discrepancies are found, annotate in additional comments ***
Item Initials
1. _____ Inspect for hull damage, engine mounting and propeller blades for damage.
2. _____ Verify bilge plug(s) are installed and tightened.
3. _____ Check that the batteries are in good condition and the battery connections are secure.
4. _____ Turn on barrel switches to appropriate position.
5. _____ Verify the engine oil level for all engine(s). (Annotate for all applicable engines.)
a. Port. (F, ¾, ½, ¼, E)
If oil added, how much and what type? ______________________________________
b. Mid. (F, ¾, ½, ¼, E)
If oil added, how much and what type? ______________________________________
c. Stbd. (F, ¾, ½, ¼, E)
If oil added, how much and what type? ______________________________________
***Do not check oil in the Tilted Position for outboard engines***
6. _____ Verify Engine coolant levels for all engine(s). (Annotate for all applicable engines)
a. Port. (F, ¾, ½, ¼, E)
If coolant added, how much and what type? ___________________________________
b. Mid. (F, ¾, ½, ¼, E)
c. Stbd. (F, ¾, ½, ¼, E)
PWS, Attachment 1 2 of 6
7. _____ Verify Generator oil level, coolant level, fuel level (if applicable).
a. Oil. (F, ¾, ½, ¼, E)
If oil added, how much and what type? ______________________________________
b. Coolant. (F, ¾, ½, ¼, E)
If coolant added, how much and what type? __________________________________
c. Fuel. (F, ¾, ½, ¼, E)
If fuel added, how much and what type? _____________________________________
8. _____ Engine Hours. (Annotate for all applicable engines.)
a. Port. _________ hrs
b. Mid. _________ hrs
c. Stbd. _________ hrs
9. _____ Check Air filters.
a. If added, what actions were taken?
10. _____ Generator Hours. _________ hrs
11. _____ Verify Vessel fuel level.
a. Main tank. (F, ¾, ½, ¼, E)
If fuel added, how much and what type? _____________________________________
b. Auxiliary tank(s). (F, ¾, ½, ¼, E)
If fuel added, how much and what type? _____________________________________
12. _____ Inspect fuel filters / RACORs for contaminants and water.
PWS, Attachment 1 3 of 6
a. If contaminants were found, what actions were taken?
13. _____ Ensure the fuel manifold is properly configured for fuel flow to the engines. If equipped with outboard engines, squeeze the primer bulb until you feel it become firm.
14. _____ Check throttle, shift and steering cables / hydraulic fluid for proper operation before starting engine(s). Look for loose, damaged or leaking connections.
15. _____ Verify steering hydraulic reservoir and pressure level.
a. Level. (F, ¾, ½, ¼, E)
If hydraulic fluid added, how much and what type? ____________________________
16. _____ Manually operate bilge pumps and verify operational.
17. _____ Verify outboard engine fresh water flush hose connection cap is hand tight. (if applicable)
18. _____ Verify seacocks are open on engine(s) and generator. (if applicable)
***Do not start engine(s) without ensuring seacocks are open. ***
19. _____ After engine start up verify Oil Pressure, Fuel Pressure, and Alarms; verify water discharge from engine(s).
a. Oil Pressure _______ psi
b. Fuel Pressure _______ psi
c. Alarm(s). (Annotate discrepancies in space below)
PWS, Attachment 1 4 of 6
20. _____ Verify engine kill switch is operational. (if applicable)
a. If not operational, what actions were taken and who was contacted?
21. _____ Verify navigation lights and anchor light operational.
22. _____ Verify marine-band radio operational.
23. _____ Verify navigation equipment powers on and is operational.
24. _____ Verify radar/GPS is functioning correctly.
25. _____ Verify number of:
a. Mooring lines ____ qty
b. Life vests ____ qty
c. Fire extinguisher ____ qty. Circle one: (Full or Empty)
d. Fenders ____ qty
e. If not within operational standards, what actions were taken and who was contacted?
PWS, Attachment 1 5 of 6
26. _____ Verify Safety of Life at Sea (SOLAS) equipment are up to date and in good working condition.
27. _____ Verify first aid kit is onboard and up to date.
28. _____ Verify depth sounding is operational.
a. If not operational, what actions were taken and who was contacted?
29. _____ Verify anchor is on board, anchor rode secured, and anchor windlass (if applicable) is operational.
30. _____ Verify bow thruster is operational (if applicable).
31. _____ Verify wind screen is clean and ensure clear visibility (if applicable).
32. _____ Verify shore power cable master is functional. (if applicable)
Additional comments / discrepancies:
PWS, Attachment 1 6 of 6
Post Operations Check List
Date: __________ Engine Shutdown Time: __________ Generator Shutdown Time: __________
Vessel Type/ Name: ____________________________________________________
Hull Identification Number (HIN): _________________________________________
Ending Location: ______________________________________________________
Weather/ Sea Conditions: ________________________________________________
Boat Captain or Engineer Print / Sign: _______________________________________
*** If any discrepancies are found, annotate in additional comments ***
Item Initials
1. _____ Verify ending engine hours.
a. Port. _________ hrs
b. Mid. _________ hrs
c. Stbd. _________ hrs
2. _____ Verify ending generator hours.
a. Generator. ________ hrs
3. _____ Fresh water flush all engines (if applicable).
4. _____ Ensure all electrical equipment is properly shut down.
5. _____ Verify the barrel switches are in the off position.
6. _____ Fresh water wash down.
Additional comments / discrepancies:
File details come from the government source that posted it. Updated .