Power_Calibrator_SOW 12_8_2022.pdf

SOW Page 1 of 8

STATEMENT OF WORK

Terminal Doppler Weather Radar (TDWR) RF Power Calibrator

AJW-L910

12/08/2022

SOW Page 2 of 8

TABLE OF CONTENTS

1.0 Background

2.0 Scope

3.0 Contractor Tasking and Requirements

4.0 Warranty

5.0 Deliverables

6.0 Milestone Schedule and Payments

SOW Page 3 of 8

1.0 BACKGROUND

This Statement of Work (SOW) is for the purchase of a Radio Frequency (RF) Power Calibrator for use in the Terminal Doppler Weather Radar (TDWR) Transmitter Microwave Assembly. It functions as a sensor to measure average RF power required for Nominal operation. This purchase is to replace the existing RF Power Calibrator which is obsolete and no longer available.

The TDWR provides real-time weather product information and is a safety and efficiency related operational part of the National Airspace System (NAS).

This SOW describes acquisition services for the following:

RF Power Calibrator (Raytheon drawing G432183-1 REV F, Narda Part Number 70031)

1.1 Contracting Officer’s Representative (COR):

The Contractor Officer’s Representative (COR) is formally designated this responsibility by the Contracting Officer to provide technical direction and Government oversight to the contractor on matters related to this contract.

2.0 SCOPE

a) The Contractor must furnish all labor, facilities, equipment, and materials to manufacture a quantity of one (1) First Article and twelve (12) production RF Power Calibrator units.

b) The RF Power Calibrator must be form-fit-function to the following part:

National Stock Number (NSN) 6625-01-363-7140 NARDA FSCM 99899 MOD 70031 IAW drawling G432183-1 REV F

c) The RF Power Calibrator must comply with all specifications in Raytheon’s G432183-1

REV F.

SOW Page 4 of 8

3.0 CONTRACTOR TASKING AND REQUIREMENTS

a) The contractor must deliver one (1) First Article RF Power Calibrator unit within 90 calendar days ARO.

b) The FAA will evaluate the First Article unit within 60 days of receipt.

c) If the First Article unit fails FAA testing, the contractor must provide a new First Article unit (or fix failing First Article unit) for FAA First Article acceptance.

d) The contractor must deliver all twelve (12) RF Power Calibrator production units within 120 calendar of First Article acceptance.

e) First Article unit must be delivered to:

Mike Monroney Aeronautical Center 7100 S. MacArthur Bvld Bldg. 215 (TSF), Area D Oklahoma City OK 73169

f) The contractor must deliver test data for each RF power calibrator unit (First Article and production units) designated by serial number.

g) If any production RF Power Calibrator unit fails FAA testing, the contractor must repair or replace the unit.

SOW Page 5 of 8

4.0 WARRANTY

The contractor must provide a minimum warranty of two years from the time of final acceptance of the last RF Power Calibrator unit delivered.

5.0 DELIVERABLES

5.1 The contractor must deliver the items mentioned Section 2.0 Scope and Section 3.0 Contractor Tasking/Requirements.

One (1) First Article unit Twelve (12) production units Test Data for all units

5.2 The contractor must electronically deliver Test Data for each RF Power Calibrator along with paper copy enclosed with each unit.

Electronic Test Data must be sent to the system engineer.

5.3 Clause 61 Requirement; Each item must be individually packaged to avoid damage through commercial freight and be insured. Packaging of each item must be marked with serial number and manufacturing date. All Clause 61 Requirements must be met.

5.4 All twelve (12) production units must be delivered to Serviceable Inventory:

A697349F

697349 DOT FAA

M F Operating Stock 6500 S. MacArthur Blvd.

Oklahoma City, OK 73169

5.5 The contractor must pay for shipping of all items to the FAA by insured commercial carrier.

SOW Page 6 of 8

6.0 MILESTONE SCHEDULE AND PAYMENTS

MILESTONE TIMEFRAME

AFTER AWARD

DESCRIPTION DELIVERABLE

1 Within 90 calendar days

ARO

First Article unit - RF Power Calibrator

RF Power Calibrator

2 Within 120 calendar days of

First Article acceptance

12 production units

- RF Power Calibrators

RF Power Calibrator

3 Delivered with each unit

Electronic Test Data Electronic Test Data