Trash SOW Revised.doc

Revise paragraph C.4.2 to read “Gallery Furnished Equipment (GFE): The Gallery will provide the Contractor the use of the existing remote power pack located in the loading dock area for the self-contained dumpster.”

Revise paragraph C.6.1.2 to read “Provide one (1) 34 CY self-contained, liquid-tight container approved for the disposition of food waste. The container shall be located in the “dumpster enclosure” in the Gallery’s loading dock area. Refuse to be contained therein will include, but is not limited to, residual food products, non-recyclable office waste, and cardboard.”

In addition to the amended paragraphs noted herein, the Gallery would like to consider the following bid option. This option includes the Contractor supplying a remote power pack for the self-contained dumpster as opposed to the Gallery supplying a unit for Contractor’s use. If this option is exercised, the Contractor shall connect his/her power pack to a Gallery furnished 240V, 60 amp, 3 phase disconnect switch located in the loading dock area. The Contractor shall provide all required repairs and maintenance of the remote power pack during the term of the contract. The remote power pack shall be removed by the Contractor at the conclusion of the contract.

In summary, the bid option would include the following changes to the contract documents:

(1) Paragraph C.4.2, Gallery Furnished Equipment (GFE): Shall be revised to indicate “none.”

(2) Paragraph C.4.2.1: Paragraph shall be deleted in its entirety.

(3) Add paragraph C.6.1.2.4. This paragraph shall read “The Contractor shall furnish and install a remote power pack for the self-contained dumpster. The remote power pack shall be located in the loading dock area as directed by the COTR. The Contractor shall connect the remote power pack to a Gallery furnished 240V, 60 amp, 3 phase disconnect switch (maximum 15 Hp); all electrical connections shall be provided by the Contractor. The Contractor shall provide all required repairs and maintenance of the remote power pack during the term of the contract. The remote power pack shall be removed by the Contractor at the conclusion of the contract.

Revisions to the paragraphs indicated herein would only be appropriate if the bid option was accepted. If the bid option was not accepted, the contract documents would remain unchanged.